How it Works
JURA
Loading...
15094
User Manual
44 pgs3.05 Mb0

JURA 15094 User Manual

Download
E8/E80 Instructions for Use
Table of contents
Your E8/E80
Control elements 4 Important information 6
Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
2 Preparation 15
Latte macchiato, cappuccino and other speciality coffees with milk .................................................15
Two ristretti, two espressi and two coffees .............................................................................................16
Ground coffee ............................................................................................................................................... 17
Permanently setting the amount of water for the cup size .................................................................18
3 Daily operation 20
Switching off the machine ..........................................................................................................................21
4 Permanent settings in programming mode 22
Adjusting the product settings .................................................................................................................22
Setting the water hardness .......................................................................................................................24
Milk system rinsing .....................................................................................................................................24
5 Maintenance 26
Cleaning the fine foam frother ................................................................................................................. 27
Dismantling and rinsing the professional fine foam frother ...............................................................28
Dismantling and rinsing the fine foam frother......................................................................................29
Inserting the filter .......................................................................................................................................29
Cleaning the machine .................................................................................................................................31
2
Table of contents
Cleaning the bean container .....................................................................................................................34
6 Display messages 35 7 Troubleshooting 36 8 Transport and environmentally friendly disposal 38
Transport/ Emptying the system .............................................................................................................38
9 Technical data 39 10 Index 40 11 JURA contact details/ Legal information 44
Symbol description
Warnings
J WARNING
J CAUTION
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T
E
‘Coffee’ Display
Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.
Prompt to take action. This symbol means that you are being prompted to perform some action.
Information and tips to make it even easier to use your JURA.
3
Control elements
Control elements
9
1 2
3 4
5
6
7
8
1 Filler funnel cover 2 Filler funnel for ground coffee 3 Bean container with
aroma preservation cover 4 Water tank cover 5 Water tank 6 Mains cable (back of the machine) 7 Coffee grounds container 8 Drip tray
9 Cover cap for grinder adjustment switch 10 Grinder adjustment switch 11 On/Off button Q 12 Connector System
©
with
professional fine foam frother 13 Height-adjustable coffee spout 14 Cup grille
10
11
12 13
14
4
1
2
1 Display 2 Multi-function buttons (button function
depends on what is shown in the display)
Fine foam frother (used in different model variants)
Control elements
Accessories
Container for milk system cleaning
6
Measuring spoon for ground coffee
Hot-water nozzle
5
Important information
Important information
Proper use
For your safety
J
The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibil­ity for the consequences of improper use.
Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.
Please carefully read and observe the important safety information set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has
U
a defective mains cable. In the event of signs of damage, for example if
U
there is a smell of burning, unplug the machine immediately from the mains supply and con­tact JURA service. For models with a permanently connected
U
mains cable: If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service cen­tre. For models with a disconnectable mains cable:
U
If the mains cable of this machine is damaged it must be replaced with a special mains cable,
6
Important information
which is available directly from JURA or from authorised JURA service centres. Make sure that the JURA and the mains cable
U
are not located close to hot surfaces. Be careful to ensure that the mains cable is not
U
trapped and does not rub against sharp edges. Never open and repair the machine yourself.
U
Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the
U
machine from the power supply, first switch off the JURA using the On/Off button. Only then should you remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts and fine foam frother:
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles
U
provided. Be careful to ensure that the fine foam frother
U
is correctly installed and clean. If incorrectly fitted or if it becomes blocked, the fine foam frother or its parts might come off.
A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:
Never allow the mains cable to loosely hang
U
down. The mains cable could pose a tripping hazard or become damaged.
7
Important information
Protect the JURA from environmental influ-
U
ences such as rain, frost and direct sunlight. Do not immerse the JURA, mains cable or con-
U
nections in water. Do not put the JURA or any individual parts in
U
the dishwasher. Before cleaning, switch your JURA off with the
U
On/Off button. Always wipe the JURA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. Only connect the machine to the mains volt-
U
age in accordance with the information on the rating plate. The rating plate is located on the underside of your JURA. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Connect the JURA directly to a domestic power
U
socket. Using multi-socket adapters or exten­sion cords may cause overheating. Please only use original JURA maintenance
U
products. Use of products that are not explic­itly recommended by JURA could damage the JURA. Do not use alkaline cleaning agents when
U
cleaning, use a soft cloth and a mild detergent. Do not use any coffee beans treated with addi-
U
tives or caramelised coffee beans. Only fill the water tank with fresh, cold water.
U
Switch the machine off with the On/Off button
U
if you are going to be absent for a longer period of time and remove the mains plug from the power socket. Children may not clean or service the machine
U
unless supervised by a responsible person.
8
Important information
Do not allow children to play with the machine.
U
Keep children under the age of 8 away from
U
the machine, or supervise them constantly. Children aged 8 and over may only operate
U
the machine without supervision if they have been instructed in how to use it safely. Chil­dren must be able to recognise and under­stand the potential dangers arising from incor­rect use.
People, including children, who
do not have the physical, sensory or mental
U
capabilities to use the machine safely or are inexperienced or lack knowledge in how to
U
use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.
Safety when handling the CLARIS Smart filter cartridge:
Filter cartridges should be kept out of the
U
reach of children.
Store filter cartridges in a dry place in the
U
sealed packaging.
Protect cartridges from heat and direct
U
sunlight.
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
U
9
1 Preparing and using for the first time
1 Preparing and using for the first time
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
Visit us on the Internet. You can download short operating instruc­tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your JURA and on every aspect of coffee.
When setting up your JURA, please note the following:
Place the JURA on a horizontal surface that is not sensitive to
U
water.
Choose a spot for your JURA which protects the machine
U
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
Determining the water hardness
10
When you use the machine for the first time, you must set the water hardness. If you do not know the hardness of your water, you can find this out first. Use the Aquadur machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
®
test strips supplied with the
1 Preparing and using for the first time
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the description on the packaging.
First-time use
J
WARNING
When using the machine for the first time, you can choose whether you want to operate JURA with or without the CLARIS Smart filter cartridge. If the water hardness is 10°dH or more, we recommend using the filter cartridge.
If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The bean container has been filled.
T Insert the mains plug into a power socket.
T Press the On/Off button Q to switch the JURA on.
‘Sprachauswahl’
E To display more languages, press the ‘ > ’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘English’. ‘Saved’ appears briefly on the display to confirm the setting. ‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).
T Press the
setting, for example to
T Press the
‘<’ or ‘>’ button to change the water hardness
‘25°dH’.
‘Save’ button. ‘Saved’ appears briefly on the display. ‘Use filter’
11
1 Preparing and using for the first time
First-time use with filter
cartridge activation
E Now decide whether you want to operate your JURA with or
without a CLARIS Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see Chapter 1 ‘Preparing and using for the first time – First-time use with filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and using for the first time – First-time use without filter cartridge acti­vation’).
CAUTION
é
è
Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Remove the water tank and rinse it with cold water. T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’ ‘Filter is being rinsed’
, water flows out of the fine foam
frother.
12
First-time use without filter
cartridge activation
1 Preparing and using for the first time
Rinsing of the filter stops automatically after approximately 300ml.
‘System is filling’, the system fills up with water. ‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’, the system is rinsed. Water flows out of
the coffee spout. The rinse stops automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
CAUTION
é
è
Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘No filter’ button. ‘Saved’ appears briefly on the display. ‘Fill water tank’
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling’, the system fills up with water. ‘Machine is heating’ ‘Machine is rinsing’
, water flows out of the coffee spout. The
rinse stops automatically. Your JURA is ready for use.
13
1 Preparing and using for the first time
é
è
é
è
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
Connecting milk
Your JURA creates fine, creamy, feather-light milk foam with a per­fect consistency. The most important requirement for frothing milk is a milk temperature of 4–8°C. We would therefore recommend using a milk cooler or a vacuum milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother. T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
14
2 Preparation
2 Preparation
E The display shows four products you can prepare. Press the
‘>’ button to display more products.
E You can stop the machine at any time while a speciality coffee
or hot water is being prepared. Just press any button.
E During the grinding operation you can select the coffee
strength of single products by pressing the
‘<’ and ‘>’ but-
tons.
E During preparation you can change the preset amounts (e.g.
water and amount of milk) by pressing the
‘<’ and ‘>’ but-
tons.
Coffee tastes best served hot. A cold porcelain cup cools the bever­age – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).
Latte macchiato, cappuccino and other speciality coffees with milk
é
è
Your JURA prepares latte macchiato, cappuccino and flat white at the touch of a button. There is no need to move the glass or cup.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one latte macchiato. Precondition:The speciality coffees with milk are displayed. Milk is
connected to the fine foam frother.
T Place a glass under the fine foam frother.
E If you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
T Press the
‘Latte macchiato’ button. ‘Latte macchiato’ appears and the preset amount of milk
foam flows into the glass.
15
2 Preparation
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in program­ming mode (see Chapter 4 ‘Permanent settings in program­ming mode – Adjusting the product settings’).
Coffee preparation starts. The preset amount of water for espresso flows into the glass. Preparation stops automati­cally. Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chap- ter 5 ‘Maintenance – Cleaning the fine foam frother’).
Ristretto, espresso and coffee
é
Two ristretti, two espressi and two coffees
é
Example:Proceed as follows to prepare one coffee. Precondition:The speciality coffees are displayed.
è
T Place a cup under the coffee spout. T Press the
Preparation starts.
‘Coffee’ button.
‘Coffee’ and the coffee strength are dis-
played. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your JURA is once more ready for use.
To prepare two speciality coffees, press the appropriate preparation button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi. Precondition:The speciality coffees are displayed.
è
T Place two cups under the coffee spout. T Press the
‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’ appears and the preset amount of water flows
into the cups. Preparation stops automatically. Your JURA is once more ready for use.
16
2 Preparation
Milk foam
Ground coffee
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare milk foam. Precondition:The speciality coffees with milk are displayed. Milk is
connected to the fine foam frother.
T Place a cup under the fine foam frother.
é
è
E If you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
E If you want to heat the milk turn the setting wheel of the
professional cappuccino frother to the Milk positionè.
T Press the
‘Milk foam’ button.
The milk foam is prepared. The preset amount of milk flows into the cup. Preparation stops automatically. Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chap- ter 5 ‘Maintenance – Cleaning the fine foam frother’).
You can choose to use a second coffee variety, for example decaf­feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee’ is displayed and
the JURA stops the operation.
E The desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth­erwise the JURA stops the operation and is once more ready for use.
All speciality coffees with ground coffee are always prepared follow­ing the same model.
17
2 Preparation
Example:Proceed as follows to prepare one espresso using ground
coffee. Precondition:The speciality coffees are displayed.
T Place an espresso cup under the coffee spout. T Open the powder chute cover.
‘Ground coffee’ / ‘Please add ground coffee’
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel. T Press the
Preparation starts.
‘Espresso’ button.
‘Espresso’ appears and the preset amount
of water for espresso flows into the cup. Preparation stops automatically. Your JURA is once more ready for use.
Permanently setting the amount of water for the cup size
é
18
It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this amount will be dispensed.
Example:Proceed as follows to permanently set the amount of water for one coffee. Precondition:The speciality coffees are displayed.
è
T Place a cup under the coffee spout. T Press and hold the
Press button’
T Release the
‘Coffee’ button.
‘Coffee’ button until ‘Enough coffee?
appears.
Preparation starts and the coffee flows into the cup.
T Press any button except
‘Cancel’ as soon as there is sufficient
coffee in the cup. Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored. Your JURA is once more ready for use.
E You can alter this setting at any time by repeating the above
procedure.
E You can also permanently set the amounts for all single prod-
ucts in programming mode (see Chapter 4 ‘Permanent set­tings in programming mode – Adjusting the product set­tings’).
2 Preparation
Adjusting the grinder
CAUTION
You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper­ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind dur- ing the preparation of an espresso.
T Place a cup under the coffee spout. T Open the cover of the grinder adjustment switch. T Press the T Turn the grinder adjustment switch to the desired position
while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.
T Close the cover of the grinder adjustment switch.
‘Espresso’ button to start preparation.
Hot water
J
CAUTION
To obtain a perfect water flow, use the hot-water nozzle.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:The speciality coffees are displayed.
T Place a cup under the hot-water nozzle. T Press the
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically. Your JURA is once more ready for use.
‘Hot water’ button.
19
3 Daily operation
3 Daily operation
Filling the water tank
CAUTION
Switching on the machine
é
è
Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
T Place a receptacle under the coffee spout. T Press the On/Off button Q to switch the JURA on.
‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’
, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
Daily maintenance
20
To ensure that you get many years of reliable service out of your JURA and to guarantee the optimum coffee quality, the machine requires daily maintenance.
T Pull out the drip tray. T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee grounds counter.
T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water.
3 Daily operation
T Clean the fine foam frother (see Chapter 5 ‘Maintenance –
Cleaning the fine foam frother’).
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the fine foam frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the professional fine foam frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
Regular maintenance
Switching off the machine
é
Carry out the following maintenance actions regularly or as required:
In the interests of hygiene, we recommend changing the milk
U
pipe and interchangeable milk spout on a regular basis (approximately every 3 months). Replacements are available from specialised dealers. Clean the inside of the water tank, e.g. with a brush. Further
U
information about the water tank is provided in these instruc­tions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’). Traces of milk and coffee may stick to the top and bottom of
U
the cup grille. If this happens, clean the cup grille.
When the JURA is switched off, the system is automatically rinsed if a speciality coffee has been prepared. If milk has been prepared, you will also be prompted to clean the milk system.
è
T Place a receptacle under the fine foam frother and under the
coffee spout.
T Press the On/Off button Q.
E If milk has been prepared, you will be prompted to clean the
milk system ( switch-off process continues automatically.
‘Clean the milk system’). After 10 seconds the
If milk has been prepared but you have not started milk sys­tem cleaning, the milk system is rinsed first (
being rinsed’ ‘Machine is rinsing’, the system rinses itself. The operation
stops automatically. Your JURA is switched off.
).
‘Milk system is
21
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the ‘Pc’ button to enter programming mode. You can navi­gate through the programme items and permanently save the required settings using the multi-function buttons. The following settings can be made:
Programme item Sub-item Explanation
‘1/5’ ‘Clean’,
‘Descale’, ‘Clean the milk system’, ‘Filter’ (only if filter is
activated)
‘2/5’ ‘Rinse the milk system’,
‘Rinse the coffee system’, ‘Information’
‘3/5’ ‘Expert mode’
‘4/5’ ‘Choose language’
‘Units’
‘Switch off after’
‘Rinse the milk system’
‘5/5’ ‘Water hardness’
T Start the required maintenance programme here.
T Here you can start the required maintenance programme or find out what maintenance actions are required.
T Select your settings for speciality coffees and hot water.
T Select your language. T Select the unit for the amount of water. T Set the time after which the JURA should
switch off automatically.
T Change the setting for the milk system rinsing. T Adjust the water hardness.
Adjusting the product settings
Product Coffee strength Amount Temperature
Ristretto, espresso Coffee 8 levels Coffee: 25ml–240ml normal, high 2 ristretti, 2 espressi, 2 coffees Cappuccino, Flat white
8 levels Coffee: 15ml–80ml normal, high
8 levels Coffee: 25ml–240ml
In the programme item tings for all speciality coffees and hot water. The following perma­nent settings can be made:
– Coffee: the amount set for
the single product is doubled.
Milk: 3sec.–120sec.
‘Expert mode’ you can make individual set-
as for single product
normal, high
22
4 Permanent settings in programming mode
Product Coffee strength Amount Temperature
Latte macchiato 8 levels Coffee: 25ml–240ml
Milk: 3sec.–120sec.
Interval: 0sec.–60sec. Portion of milk – Milk: 3sec.–120sec. – Hot water – Water: 25ml–450ml low, normal, high
Permanent settings in programming mode always follow the same model.
Example:Proceed as follows to change the coffee strength for one coffee.
T Press the T Press the T Press the
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
‘Pc’ button. ‘>’ button several times until ‘3/5’ is displayed. ‘Expert mode’ button.
normal, high
‘>’ button (bottom right).
Automatic switch-off
T Press the
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ appears and the coffee strength is displayed.
T Press the
fee strength.
T Press the
‘Saved’ appears briefly on the display. ‘Coffee’
T Press the ‘’ button for around 2 seconds to exit program-
ming mode.
By instructing your JURA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your JURA switches off automatically after the preset time following the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or 1–9hours.
‘Coffee’ button.
‘<’ or ‘>’ button to change the setting for the cof-
‘Save’ button.
23
4 Permanent settings in programming mode
T Press the ‘Pc’ button. T Press the T Press the
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the switch-off time. T Press the
‘Saved’ appears briefly on the display. ‘4/5’
T Press the ‘’ button to exit programming mode.
‘>’ button several times until ‘4/5’ is displayed. ‘Switch off after’ button.
‘Save’ button.
Setting the water hardness
Milk system rinsing
The harder the water is, the more frequently the JURA needs to be descaled. It is therefore important to set the water hardness accu­rately.
The water hardness was set when the machine was first used. You can change this setting at any time.
The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH.
T Press the T Press the T Press the
‘Water hardness’
T Press the ‘<’ or ‘ >’ button to change the setting for the
water hardness.
T Press the
‘Saved’ appears briefly on the display. ‘5/5’
T Press the ‘’ button to exit programming mode.
In the programme item the following settings:
‘Manual’: You are prompted to perform milk system rinsing
U
10minutes after preparation of a speciality coffee with milk.
‘Automatic’: The milk system rinsing is automatically initiated
U
10minutes after preparation of a speciality coffee with milk.
‘Pc’ button. ‘>’ button several times until ‘5/5’ is displayed. ‘Water hardness’ button.
‘Save’ button.
‘4/5’ / ‘Rinse the milk system’ you can make
24
Example:Proceed as follows to set the milk system rinsing to be initiated automatically 10 minutes after the preparation.
4 Permanent settings in programming mode
T Press the ‘Pc’ button. T Press the T Press the
‘Rinse the milk system’
T Press the ‘Automatic’ button. T Press the
‘Saved’ appears briefly on the display. ‘4/5’
T Press the ‘’ button to exit programming mode.
‘>’ button several times until ‘4/5’ is displayed. ‘Rinse the milk system’ button.
‘Save’ button.
Unit for amount of water
Language
Example:Proceed as follows to change the unit for the amount of
water from
Example:Proceed as follows to change the language from to
‘Deutsch’.
‘ml’ to ‘oz’.
T Press the T Press the T Press the
‘Units’
T Press the ‘oz’ button. T Press the
‘Saved’ appears briefly on the display. ‘4/5’
T Press the ‘’ button to exit programming mode.
T Press the T Press the T Press the
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘Gespeichert’ appears briefly on the display. ‘4/5’
T Press the ‘’ button to exit programming mode.
‘Pc’ button. ‘>’ button several times until ‘4/5’ is displayed. ‘Units’ button.
‘Save’ button.
‘English’
‘Pc’ button. ‘>’ button several times until ‘4/5’ is displayed. ‘Choose language’ button.
‘Deutsch’.
25
5 Maintenance
5 Maintenance
Your JURA has the following integrated maintenance programmes:
Rinsing the machine (‘Rinse the coffee system’)
U
Rinsing the fine foam frother (‘Rinse the milk system’)
U
Cleaning the fine foam frother (‘Clean the milk system’)
U
Changing the filter (‘Change the filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
U
E Carry out each maintenance programme when you are
prompted to do so.
E Press the
grammes. When the bar is completely filled with red, your JURA will prompt you to perform the appropriate mainte­nance programme.
‘Pc’ button to view a list of the maintenance pro-
Rinsing the machine
Rinsing the fine foam frother
You can start coffee system rinsing manually at any time.
é
è
T Place a receptacle under the coffee spout. T Press the T Press the T Press the
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
After each milk preparation, the JURA prompts you to perform a milk system rinse.
E In programming mode, you can set whether the milk system
rinsing is to be prompted 10 minutes after preparation or initi­ated automatically (see Chapter 4 ‘Permanent settings in pro­gramming mode – Milk system rinsing’).
‘Pc’ button. ‘>’ button. ‘Rinse the coffee system’ button to start the rinse
26
5 Maintenance
Precondition:‘Rinse the milk system’ is displayed.
é
è
T Place a receptacle under the fine foam frother. T Press the T Press the T Press the
‘Pc’ button. ‘>’ button.
‘Rinse the milk system’ button to start the rinse
operation.
‘Milk system is being rinsed’ appears and the fine foam
frother is rinsed. The operation stops automatically.
Cleaning the fine foam frother
CAUTION
6
E This chapter applies to the professional fine foam frother and
the fine foam frother.
To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers. E To clean the milk system, use the container supplied.
T Press the T Press the
‘Pc’ button. ‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button. T Press the
‘Next’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or carton. T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark. T Place the container under the fine foam frother. T If you are using the professional fine foam frother, set the
setting wheel to the Milk Foam position é.
27
5 Maintenance
T Connect the milk pipe to the container.
é
è
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
6
é
è
Dismantling and rinsing the professional fine foam frother
é
è
T Press the
‘Next’ button. ‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are cleaned.
T During the first brief interruption, set the setting wheel of
the professional fine foam frother to the Milk position è.
‘Clean the milk system’
T Rinse the container thoroughly and fill the front part with
250ml of fresh water.
T Place this under the fine foam frother and reconnect the
milk pipe to the container.
T Press the
‘Next’ button. ‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are rinsed with fresh water. The start screen is displayed.
To make sure the professional fine foam frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your JURA will not prompt you to dis­mantle and rinse the professional fine foam frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
T Dismantle the professional fine foam frother into its individ-
ual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts in a solution of 250ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
28
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the professional fine foam frother.
T Firmly attach the professional fine foam frother to the
Connector System
©
.
5 Maintenance
Dismantling and rinsing the fine foam frother
Inserting the filter
To make sure the fine foam frother works properly, and in the inter­ests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your JURA will not prompt you to dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
©
System
by twisting slightly.
T Dismantle the fine foam frother into its individual parts. T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts in a solution of 250ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector Sys-
©
tem
.
Your JURA no longer has to be descaled if you are using the CLARIS Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows.
Precondition:The start screen is displayed.
é
è
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Remove and empty the water tank. T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
29
5 Maintenance
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display. ‘Filter is beingrinsed’, the water flows directly into the drip
tray.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 300ml. The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Changing the filter
30
E Once the filter cartridge stops working (depending on the
water hardness setting), the JURA will prompt you to change the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The start screen is displayed. The filter symbol at the bottom of the display lights up red.
é
è
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Remove and empty the water tank. T Turn the filter cartridge anticlockwise and remove it along
with the extension from the water tank.
T Fit the filter cartridge extension on top of a new CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Saved’ appears briefly on the display. The machine has
automatically detected that you have just changed the filter cartridge.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
5 Maintenance
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 300ml. The start screen is displayed.
Cleaning the machine
CAUTION
After 180preparations or 80switch-on rinses, the JURA will prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Precondition:
T Press the T Press the T Press the
‘Clean machine’ is displayed.
‘Pc’ button.
‘Start’ button.
‘Next’ button. ‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Clean’
é
è
T Place a receptacle under the coffee spout. T Press the
‘Next’ button. ‘Machine is being cleaned’, water flows out of the coffee
spout. The operation is interrupted,
‘Add cleaning tablet’.
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. T Press the
‘Next’ button. ‘Machine is being cleaned’, water flows out of the coffee
spout several times. The operation stops automatically.
‘Empty coffee grounds container’
31
5 Maintenance
T Empty the drip tray and coffee grounds container and put
them back into the machine. Cleaning is now complete. The start screen is displayed.
Descaling the machine
J
CAUTION
CAUTION
CAUTION
CAUTION
The JURA builds up deposits of limescale over time and automati­cally prompts you to descale it when necessary. The degree of calci­fication depends on the hardness of your water.
E If you are using a CLARIS Smart filter cartridge, you will not be
prompted to descale.
If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
T Avoid contact with the skin or eyes. T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam­aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
32
E The descaling programme lasts approximately 40minutes. E JURA descaling tablets are available from specialised dealers.
Precondition:
T Press the T Press the T Press the
‘Decalcify machine’ is displayed.
‘Pc’ button.
‘Start’ button.
‘Next’ button. ‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Agent in tank’
T Remove and empty the water tank.
5 Maintenance
T Completely dissolve the contents of one blister (3JURA des-
caling tablets) in a receptacle holding 500ml of lukewarm water. This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
é
è
T Place a receptacle under the fine foam frother. T Press the
‘Next’ button. ‘Machine is being descaled’ appears and water flows out of
the fine foam frother repeatedly. The operation is interrupted,
‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert the
tank.
é
è
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Press the
‘Next’ button. ‘Machine is being descaled’, the descaling operation is con-
tinued. The operation is interrupted,
‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine. Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
33
5 Maintenance
Cleaning the bean container
Descaling the water tank
Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.
Precondition:
T Switch the machine off with the On/Off button Q. T Remove the aroma preservation cover. T Clean the bean container with a soft, dry cloth. T Fill the bean container with coffee beans and close the
Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling
T Leave the water tank with the descaling solution for several
T Empty the water tank and rinse it thoroughly. T If you use a CLARIS Smart filter cartridge, insert this again. T Fill the water tank with fresh, cold water and reinsert the
‘Fill bean container’ is displayed.
aroma preservation cover.
tablets in it.
hours (e.g. overnight).
tank.
34
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty. You
cannot prepare any products.
‘Empty coffee grounds container’
‘Drip tray not fitted’ The drip tray is not inserted
‘Fill bean container’ The bean container is empty.
‘Rinse the milk system’
The filter symbol at the bottom of the display lights up red.
‘Clean machine’ The JURA is prompting you to
‘Decalcify machine’ The JURA is prompting you to
‘Too hot’ The system is too hot to start
The coffee grounds container is full. You cannot prepare any products.
correctly or is not inserted at all. You cannot prepare any products.
You cannot prepare any speciality coffees, but you can prepare hot water and milk. The JURA requests a milk system rinse.
The filter cartridge no longer works.
clean it.
descale it.
a maintenance programme.
T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’).
T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).
T Fit the drip tray.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time – Filling the bean container’).
T Perform milk system rinsing (see Chapter 5 ‘Maintenance – Rinsing the fine foam frother’).
T Replace the CLARIS Smart filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).
T Perform cleaning (see Chapter 5 ‘Maintenance – Cleaning the machine’).
T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine’).
T Wait for several minutes until the system has cooled or prepare a speciality coffee or hot water.
6 Display messages
35
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is produced when the milk is frothed or milk sprays out of the fine foam frother.
Coffee only comes out in drips when it is being prepared.
‘Fill water tank’ is
displayed although the water tank is full.
Little or no water or steam comes out of the fine foam frother. The pump is very quiet.
Grinder is making a very loud noise.
‘ERROR2’ or ‘ERROR5’
is displayed.
The fine foam frother is dirty.
The coffee is ground too finely and obstructs the system. The water hardness may not have been correctly set.
There is a lot of limescale in the water tank.
The connector of the fine foam frother may be blocked by milk residues or limescale fragments loosened during descaling.
There are foreign objects in the grinder.
If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons.
T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance – Dismantling and rinsing the profes­sional fine foam frother’).
T Set the grinder to a coarser setting (see Chapter 2 ‘Preparation – Adjusting the grinder’). T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine’).
T Descale the water tank (see Chapter 5 ‘Maintenance – Descaling the water tank’).
T Remove the fine foam frother. T Unscrew the black connector with the
aid of the hexagonal hole on the measuring spoon for ground coffee.
T Clean the connector thoroughly. T Screw the connector back on by hand. T Carefully tighten it using the hexago-
nal hole on the measuring spoon, turning by no more than a quarter of a rotation.
T Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).
T Warm the machine at room tempera­ture.
36
Problem Cause/Result Action
Other
‘ERROR’
messages are dis­played.
–
T Switch the JURA off with the On/Off button Q. Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).
7 Troubleshooting
37
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Transport/ Emptying the system
é
è
Disposal
Keep the packaging for your JURA. It should be used to protect the machine during transport.
In order to protect the JURA from frost during transport, the system must be emptied.
Precondition:The speciality coffees with milk are displayed.
T Remove the milk pipe from the fine foam frother. T Place a receptacle under the fine foam frother. T Press the
‘Milk foam’ button. ‘Milk foam’ appears and hot steam is discharged from the
fine foam frother.
T Remove and empty the water tank. T Press the
‘>’ button several times until ‘Amount of milk’ / ‘60sec.’ is displayed.
Steam will continue to be discharged from the fine foam frother until the system is empty.
‘Fill water tank’
T Press the On/Off button Q.
Your JURA is switched off.
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.
38
9 Technical data
9 Technical data
Voltage 220–240V~, 50Hz Power 1450W Conformity mark
Pump pressure static, max. 15bar Holding capacity of water tank (without filter) Holding capacity of bean container 280g Holding capacity of coffee grounds container Cable length approx. 1.1m Weight approx. 9.8kg Dimensions (WHD) 28.0  35.1  43.9cm
Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the underside of the machine, right next to the mains cable's connec­tion point.
A
1.9l
max. 16 portions
39
10 Index
10 Index
A
Addresses 44 Adjusting the product settings 22 Aroma preservation cover
Bean container with aroma preservation cover 4
Automatic switch-off 23
B
Bean container
Bean container with aroma preservation cover 4 Cleaning 34 Filling 10
Bus bar
Technical data 39
Button
On/Off button 4
C
Cappuccino 15 Central grounding point 39 CLARIS Smart filter cartridge
Change 30 Insert 29
Cleaning
Bean container 34 Fine foam frother 27 Machine 31
Coffee 16
Two coffees 16 Coffee grounds container 4 Coffee spout
Height-adjustable coffee spout 4 Connector System Consistency of grind
Adjusting the grinder 19
Grinder adjustment switch 4 Contact details 44 Cover
Filler funnel for ground coffee 4
Water tank 4 Cup grille 4 Customer support 44
©
4
D
Descaling
Machine 32
Water tank 34 Display 5 Display messages 35 Disposal 38 Double product 16 Drip tray 4
E
Emptying the system 38 Errors
Troubleshooting 36 Espresso 16
Two espressi 16
F
Filler funnel
Filler funnel for ground coffee 4 Filling
Bean container 10
Water tank 20 Filter
Change 30
Insert 29 Fine foam frother
Cleaning 27
Dismantling and rinsing 29
Professional fine foam frother 4
Rinsing 26 First-time use 11
With filter cartridge activation 12
Without filter cartridge activation 13 Flat white 15
G
Grinder adjustment switch 4 Ground coffee 17
Measuring spoon for ground coffee 5 Grounding point 39
H
Height-adjustable coffee spout 4 Hotline 44 Hot water 19 Hot-water nozzle 5
40
10 Index
I
Instant coffee
Ground coffee 17
Internet 10
J
JURA
Contact details 44 Internet 10
L
Language 25 Latte macchiato 15
M
Machine
Cleaning 31 Descaling 32 Regular maintenance 21 Rinsing 26 Setting up 10 Switching off 21
Switching on 20 Mains cable 4 Maintenance 26
Daily maintenance 20
Regular maintenance 21 Measuring spoon for ground coffee 5 Messages, display 35 Milk
Connecting milk 14 Milk foam 17 Milk system rinsing 24, 26
P
Permanently setting the water for the cup
size 18
Permanent settings in programming mode
22
Preparation 15
Cappuccino 15
Coffee 16
Espresso 16
Flat white 15
Ground coffee 17
Hot water 19
Latte macchiato 15 Milk foam 17 Ristretto 16 Two coffees 16 Two espressi 16 Two ristretti 16 Two speciality coffees 16
Problems
Troubleshooting 36
Product settings
Adjusting 22
Professional fine foam frother 4
Dismantling and rinsing 28
Programming mode 22
Automatic switch-off 23 Language 25 Milk system rinsing 24 Setting the water hardness 24 Unit for amount of water 25
Proper use 6
R
Regular maintenance 21 Rinses
Milk system rinsing 26
Rinsing
Fine foam frother 26 Machine 26
Ristretto 16
Two ristretti 16
S
Safety 6 Safety information 6 Settings
Permanent settings in programming mode 22
Setting up
Setting up the machine 10 Short operating instructions 10 Switching off 21 Switching on 20 Switch-off
Automatic switch-off 23 Symbol description 3
41
10 Index
T
Technical data 39 Tel 44 Transport 38 Troubleshooting 36 Two products 16
U
Unit for amount of water 25 Use, First-time 11
W
Water hardness
Determining the water hardness 10 Setting the water hardness 24
Water tank 4
Descaling 34 Filling 20
Website 10
42
43
J72215/E8-E80/en/201612
11 JURA contact details/ Legal information
11 JURA contact details/ Legal information
JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at
www.jura.com.
Directives
Technical changes
Feedback
Copyright
The machine complies with the following directives:
2014/35/EU– Low Voltage Directive
U
2014/30/EU– Electromagnetic Compatibility
U
2009/125/EC– Ecodesign Directive
U
2011/65/EU– RoHS Directive
U
We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your JURA may vary.
Your opinion is important to us! Use the contact details at www.jura.com.
The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.
44
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use