JURA 15046 User Manual

J90/J95/J500 Instructions for Use

Table of contents

Your J90/J95/J500

Control elements 4

Important information 6

Proper use ......................................................................................................................................................6

For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10

JURA on the Internet ....................................................................................................................................10

Setting up the machine ..............................................................................................................................10

Filling the water tank ...................................................................................................................................10

Filling the bean container ...........................................................................................................................10

First-time use .................................................................................................................................................11

Inserting and activating the filter ..............................................................................................................12

Determining and adjusting the water hardness .....................................................................................13

Connecting milk ...........................................................................................................................................14

2 Preparation 15

Ways of preparing a beverage ................................................................................................................... 15

Espresso and coffee .....................................................................................................................................16

Preparing two speciality coffees ................................................................................................................16

Latte macchiato and Cappuccino ..............................................................................................................16

Warm milk and milk foam ..........................................................................................................................17

Ground coffee ...............................................................................................................................................18

Permanently setting the amount of water for the cup size .................................................................19

Adjusting the grinder ..................................................................................................................................19

Hot water ......................................................................................................................................................20

3 Daily operation 21

Switching on the machine ..........................................................................................................................21

Daily maintenance .......................................................................................................................................21

Regular maintenance .................................................................................................................................22

Switching off the machine .........................................................................................................................22

4 Permanent settings in programming mode 23

Product settings ..........................................................................................................................................24

Maintenance settings .................................................................................................................................25

Energy-saving mode ..................................................................................................................................26

Automatic switch-off .................................................................................................................................. 27

Unit for amount of water ........................................................................................................................... 27

Restore factory settings .............................................................................................................................28

Language ......................................................................................................................................................29

Background colour ......................................................................................................................................29

Querying information ................................................................................................................................30

2

Table of contents

5 Maintenance 31

Rinsing the machine ....................................................................................................................................31

Rinsing the cappuccino frother ................................................................................................................32

Cleaning the cappuccino frother .............................................................................................................. 32

Dismantling and rinsing the cappuccino frother .................................................................................. 33

Changing the filter ...................................................................................................................................... 33

Cleaning the machine ................................................................................................................................34

Descaling the machine ..............................................................................................................................36

Cleaning the bean container ..................................................................................................................... 38

Descaling the water tank ........................................................................................................................... 38

6 Display messages 39

7 Troubleshooting 40

8 Transport and environmentally friendly disposal 42

Transport/ Emptying the system .............................................................................................................42

Disposal .........................................................................................................................................................42

9 Technical data 43

10 Index 44

11 JURA contact details/ Legal information 48

Symbol description

Warnings

J WARNING

J CAUTION

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T

E

‘Espresso’ Display

Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.

Prompt to take action. This symbol means that you are being prompted to
perform some action.

Information and tips to make it even easier to use your JURA.

3

Control elements

Control elements

9

10

1
2
3

4

5

6

7
8

1 Bean container cover
2 Water tank cover
3 Bean container with aroma preservation

cover
4 Water tank
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
8 Cup grille

11

12

13

14

15

9 Filler funnel for ground coffee
10 Storage compartment cover
11 Grinder adjustment switch
12 Hot-water nozzle *
13 Measuring spoon for ground coffee
14 Height- and width-adjustable coffee spout
15 Power switch and mains cable (side of

machine)

*Not on all models

4

Control elements

31 2

4

5

Top of the machine

1 Q On/Off button
2 g Rotary Switch
3 O P button (programming)

Front

4 Display
5 Buttons (button function depends on

what is shown in the display)

5

Important information

Important information

Proper use

For your safety

J

The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi­bility for the consequences of improper use.

Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser­vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.

Please carefully read and observe the important
safety information set out below.

To avoid danger of potentially fatal electric shock:

Never use a machine which is damaged or has

U

a defective mains cable.
In the event of signs of damage, for example if

U

there is a smell of burning, unplug the machine
immediately from the mains supply and con­tact JURA service.
If the mains cable of this machine is damaged,

U

it must be repaired either directly by JURA or
by an authorised JURA service centre.
Make sure that the JURA and the mains cable

U

are not located close to hot surfaces.
Be careful to ensure that the mains cable is not

U

trapped and does not rub against sharp edges.

6

Important information

Never open and repair the machine yourself.

U

Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
To completely and safely disconnect the

U

machine from the power supply, first switch
off the JURA using the On/Off button and then
at the power switch. Only then should you
remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts and
the cappuccino frother.

Place the machine out of the reach of children.

U

Do not touch any hot parts. Use the handles

U

provided.
Ensure that the cappuccino frother is correctly

U

fitted and clean. If incorrectly fitted or if they
become blocked, the cappuccino frother or its
parts might come off.

A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:

Never allow the mains cable to loosely hang

U

down. The mains cable could pose a tripping
hazard or become damaged.
Protect the JURA from environmental influ-

U

ences such as rain, frost and direct sunlight.
Do not immerse the JURA, mains cable or con-

U

nections in water.

7

Important information

Do not put the JURA or any individual parts in

U

the dishwasher.
Switch your JURA off at the power switch

U

before any cleaning operation. Always wipe
the JURA with a damp cloth rather than a wet
one, and protect it from prolonged exposure
to water splash.
On models with glass cup grille: Do not sub-

U

ject the glass cup grille to shock or impact.
Only connect the machine to the mains volt-

U

age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your JURA. Further technical data
is provided in these instructions for use (see
Chapter 9 ‘Technical data’).
Connect the JURA directly to a domestic power

U

socket. Using multi-socket adapters or exten­sion cords may cause overheating.
Please only use original JURA maintenance

U

products. Use of products that are not explic­itly recommended by JURA could damage the
JURA.
Do not use any coffee beans treated with addi-

U

tives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.

U

Switch the machine off at the power switch if

U

you are going to be absent for a longer period
of time.
Children may not clean or service the machine

U

unless supervised by a responsible person.
Do not allow children to play with the machine.

U

Keep children under the age of 8 away from

U

the machine, or supervise them constantly.

8

Important information

Children aged 8 and over may only operate

U

the machine without supervision if they have
been instructed in how to use it safely. Chil­dren must be able to recognise and under­stand the potential dangers arising from incor­rect use.

People, including children, who

do not have the physical, sensory or mental

U

capabilities to use the machine safely or
are inexperienced or lack knowledge in how to

U

use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor­rectly.

Safety when handling the CLARIS Blue filter car­tridge:

Filter cartridges should be kept out of the

U

reach of children.

Store filter cartridges in a dry place in the

U

sealed packaging.

Protect cartridges from heat and direct sun-

U

light.

Do not use damaged filter cartridges.

U

Do not open filter cartridges.

U

9

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet

Setting up the machine

Filling the water tank

CAUTION

Visit us on the Internet. You can download short operating instruc­tions for your machine from the JURA website (www.jura.com). You

will also find interesting and up-to-date information on your JURA
and on every aspect of coffee.

When setting up your JURA, please note the following:

Place the JURA on a horizontal surface that is not sensitive to

U

water.

Choose a spot for your JURA which protects the machine

U

against overheating. Ensure that the ventilation slots are not

covered.

Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.

T Only fill the water tank with fresh, cold water.

T Open the water tank cover.

T Remove the water tank and rinse it with cold water.

T Fill the water tank with fresh, cold water and reinsert the

tank.

T Close the water tank cover.

Filling the bean container

CAUTION

10

The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.

T Only use roasted, untreated coffee beans to fill the bean con-

tainer.

T Open the bean container cover and remove the aroma pres-

ervation cover.

First-time use

J

WARNING

1 Preparing and using for the first time

T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective

mains cable.

Precondition:The water tank and bean container have been filled.

T Insert the mains plug into a power socket.
 3 T Switch on the JURA using the power switch on the right-

hand side of the machine.

 Q T Press the On/Off button to switch the JURA on.

The display shows the languages you can choose from.

E To display more languages, press the

‘Next’ button (bottom

right).

T Press the button that corresponds to the language you want,

e.g.

‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Please press the Rotary Switch.’, the Rotary Switch lights up.

T Place a receptacle under the cappuccino frother.

 k T Press the Rotary Switch.

‘System is filling.’, the system fills up with water. The opera-

tion stops automatically.

‘Please press the Rotary Switch.’

T Place a receptacle under the coffee spout.

 k T Press the Rotary Switch.

‘Machine is rinsing.’, the machine rinses. The operation

stops automatically.

‘Please select product:’ appears on the

display. Your JURA is ready for use.

E The display shows the products you can prepare.

11

1 Preparing and using for the first time

Inserting and activating
the filter

Your JURA no longer has to be descaled if you are using the CLARIS
Blue filter cartridge. If the water hardness is 10°dH or more, we rec­ommend using the filter cartridge.

E If you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).

E Perform the ‘inserting the filter’ operation without any inter-

ruptions. This will ensure that your JURA always produces its
best.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Mainte-

T Press the

T Press the ‘Ac tiv e’ button.
T Press the

T Remove the filter cartridge extension from the Welcome

T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the

T Close the filter holder. It will click into place audibly.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

nance settings (3/6)’

‘Filter’ button.

‘Filter’

‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’.

Pack.

water tank, exerting slight pressure.

is displayed.

12

E After two months, the filter will cease to work. Set the date on

the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and reinsert the

tank.

1 Preparing and using for the first time

T Place a receptacle under the cappuccino frother.
T Press the

‘Filter is being rinsed.’, water flows out of the cappuccino

frother.

E You can interrupt rinsing of the filter at any time by pressing

any button. Press the Rotary Switchk to continue rinsing of
the filter.

E The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Rinsing of the filter stops automatically after approximately
500ml. The JURA heats up and is once more ready for use.
The filter is now activated.

‘Next’ button.

Determining and
adjusting the water
hardness

Determining the water

hardness

E If you are using the CLARIS Blue filter cartridge and have acti-

vated it in programming mode, you will not be able to adjust
the water hardness.

The harder the water is, the more frequently the JURA needs to be
descaled. It is therefore important to set the water hardness accu­rately.

The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.

You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.

T Hold the test strip briefly (for 1 second) under flowing water.

Shake off the water.

T Wait for about one minute.
T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.

13

1 Preparing and using for the first time

Setting the water hardness

Connecting milk

Example:Proceed as follows to change the water hardness from

‘16 °dH’ to ‘25 °dH’.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Mainte-

T Press the

T Press the ‘<’ or ‘>’ button to set the water hardness.
T Press the

 O T Press the P button to exit programming mode.

Your JURA creates fine, creamy, feather-light milk foam with a per­fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a vacuum milk container.

T Remove the protective cover from the cappuccino frother.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

nance settings (3/6)’

‘Water hardness’ button.
‘Water hardness’

‘Save’ button.
‘Saved’ appears briefly on the display to confirm the setting.
‘Maintenance settings (3/6)’

‘Please select product:’

is displayed.

14

T Attach the milk pipe to the cappuccino frother.
T Connect the other end of the milk pipe to a milk container

or immerse it in a milk carton.

2 Preparation

2 Preparation

E While a speciality coffee or hot water is being prepared, you

can stop preparation at any time. Just press any button.

E During the grinding operation you can select the coffee

strength of single products by turning the Rotary Switch g:
; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong) or
;;;;; (extra-strong).

E During preparation, you can change the preset amount of

water by turning the Rotary Switch g or pressing the

‘>’ buttons.

E You can follow the current status of preparation on the display.

You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).

‘<’ and

Ways of preparing a
beverage

Only some of the speciality coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more speciality coffees are displayed in the product selector view.
The product selector view disappears automatically after 5 seconds
if no preparation is started.

The following products are displayed as standard:

‘Cappuccino’

U

‘Latte macchiato’

U

‘1 portion milk’

U

‘Espresso’

U

‘Coffee’

U

‘Hot water’

U

Additional speciality coffees in the product selector view:

‘Ristretto’

U

‘2 ristretti’

U

‘2 espressi’

U

‘2 coffees’

U

15

2 Preparation

Espresso and coffee

Preparing two speciality
coffees

‘Espresso’ and ‘Coffee’ are prepared following this model.

Example:Proceed as follows to prepare one coffee.

T Place a cup under the coffee spout.
T Press the

Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically.
appears on the display.

To prepare two speciality coffees, either use the product selector
view or press the appropriate preparation button twice.

Example:Proceed as follows to prepare two coffees (using product
selector view).

T Place two cups under the coffee spout.
 g T Turn the Rotary Switch to view the product selector.
 g T Turn the Rotary Switch until
 k T Press the Rotary Switch.

Preparation starts. The preset amount of water for coffee
flows into the cups.
Preparation stops automatically.
appears on the display.

‘Coffee’ button.

‘Please select product:’

‘2 coffees’ is displayed.

‘Please select product:’

Latte macchiato and
Cappuccino

16

E Proceed as follows to prepare two cups of coffee at the touch

of a button: Place two cups under the coffee spout. Press the

‘Coffee’ button twice (within two seconds) to start coffee

preparation.

Your JURA can prepare a latte macchiato or cappuccino at the touch
of a button. There is no need to move the glass or cup.

Example:Proceed as follows to prepare one latte macchiato.
Precondition:Milk is connected to the cappuccino frother.

2 Preparation

T Place a glass under the cappuccino frother.

T Turn the setting wheel of the cappuccino frother to the Milk

Foam position ü.

T Press the

‘Latte macchiato’, the milk foam is prepared.

Preparation stops automatically when the preset amount of
milk is reached.

E There is a short interval while the hot milk separates from the

milk foam. This allows the typical layers of a latte macchiato

to form. You can choose the length of this interval in program-

ming mode (see Chapter 4 ‘Permanent settings in program-

ming mode – Product settings’).

Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati­cally.

To ensure that the cappuccino frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’).

‘Latte macchiato’ button.

‘Please select product:’ appears on the display.

Warm milk and milk
foam

Example:Proceed as follows to prepare milk foam.
Precondition:Milk is connected to the cappuccino frother.

T Place a cup under the cappuccino frother.

T Turn the setting wheel of the cappuccino frother to the Milk

Foam position ü.

E If you want to heat the milk turn the setting wheel of the cap-

puccino frother to the Milk positionz.

T Press the

‘1 portion milk’

As soon as the machine has heated up, ‘Please select prod-

uct:’

T Press the

‘1 portion milk’, the milk foam is prepared. Preparation stops

automatically when the preset amount of milk is reached.

‘Please select product:’ appears on the display.

‘1 portion milk’ button.

appears.

‘1 portion milk’ button again.

17

2 Preparation

To ensure that the cappuccino frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’).

Ground coffee

You can choose to use a second coffee variety, for example decaf­feinated coffee, with the filter funnel for ground coffee.

E Never add more than two level measuring spoons of ground

coffee.

E Use ground coffee which is not ground too finely. Very fine

coffee can block up the system so that the coffee only comes

out in drips.

E If you did not fill the machine with a sufficient amount of

ground coffee,

the JURA stops the operation.

E The desired speciality coffee must be prepared within approx-

imately one minute after filling with the ground coffee. Oth-

erwise the JURA stops the operation and is once more ready

for use.

All speciality coffees with ground coffee are always prepared follow­ing the same model.

Example:Proceed as follows to prepare one coffee using ground
coffee.

T Place a cup under the coffee spout.

T Open the cover of the filler funnel for ground coffee.

‘Please add ground coffee.’

T Place one level measuring spoon of ground coffee into the

filler funnel.

T Close the cover of the filler funnel.

‘Please select product:’

T Press the ‘Espresso’ button.

Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically.
appears on the display.

‘Not enough ground coffees’ is displayed and

‘Please select product:’

18

2 Preparation

Permanently setting the
amount of water for the
cup size

It is easy to permanently adjust the amount of water for all products
to the cup size. Adjust the amount once as shown in the following
example. Every time you prepare a drink in the future, this amount
will be dispensed.

The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.

Example:Proceed as follows to permanently set the amount of
water for one coffee.

Precondition:

T Place a cup under the coffee spout.

T Press and hold the

T Release the

T Press any button as soon as there is sufficient coffee in the

E You can alter this setting at any time by repeating the above

procedure.

E The amount can be permanently adjusted to the cup size for

the products shown in the product selector too. To do this,

press and hold the Rotary Switch k until

button’

E You can also permanently set the amount for all products in

programming mode (see Chapter 4 ‘Permanent settings in

programming mode – Product settings’).

‘Please select product:’ is displayed.

‘Coffee’ button until ‘Enough water?

Press button’

Preparation starts and the coffee flows into the cup.

cup.
Preparation stops.
set amount of water for one coffee is permanently stored.

‘Please select product:’ appears on the display.

appears.

‘Coffee’ button.

‘Saved’ appears briefly on the display. The

‘Enough water? Press

appears.

Adjusting the grinder

CAUTION

You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.

If you adjust the consistency of grind when the grinder is not oper­ating, the grinder adjustment switch could be damaged.

T Only adjust the consistency of grind when the grinder is run-

ning.

19

2 Preparation

The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.

Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.

T Open the storage compartment cover.

T Place a cup under the coffee spout.

T Press the

The grinder starts up.

‘Espresso’ button.

‘Espresso’ is displayed.

T Turn the grinder adjustment switch to the desired position

while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.

T Close the storage compartment cover.

Hot water

J

CAUTION

The following temperatures can be selected for preparing hot water:

‘Low’, ‘Normal’, ‘X high’.

E On some models you will find a separate hot-water nozzle

under the cover of the storage compartment.

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

T Place a cup under the cappuccino frother.

T Press the

‘Hot water’ button.

‘Hot water’ and the temperature are displayed.

E By pressing the

‘ <’ or ‘ >’ button several times (within

approximately 2 seconds) you can set the temperature to
your individual preference. This setting is not saved.

‘Hot water’, hot water flows into the cup.

Preparation stops automatically.

‘Please select product:’

appears on the display.

20

3 Daily operation

3 Daily operation

Switching on the
machine

Daily maintenance

When the JURA is switched on, it automatically prompts you to per­form the switch-on rinse. Start the switch-on rinse by pressing the
Rotary Switchk. In programming mode you can change this setting
so that the machine starts the switch-on rinse automatically (see
Chapter 4 ‘Permanent settings in programming mode – Mainte­nance settings’).

Precondition:Your JURA is switched on at the power switch.

T Place a receptacle under the coffee spout.

 Q T Press the On/Off button to switch the JURA on.

‘Welcome to JURA’ appears on the display. The machine

heats up.

‘Please press the Rotary Switch.’

 k T Press the Rotary Switch.

The machine rinses. The operation stops automatically.

‘Please select product:’ appears on the display.

To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.

T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine

is switched on. This is the only way of resetting the coffee
grounds counter.

T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Remove the milk pipe and rinse it thoroughly under running

water.

T Dismantle and rinse the cappuccino frother (see Chapter 5

‘Maintenance – Dismantling and rinsing the cappuccino
frother’).

T Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

21

3 Daily operation

Regular maintenance

Switching off the
machine

Carry out the following maintenance actions regularly or as
required:

In the interests of hygiene, we recommend changing the milk

U

pipe on a regular basis (approximately every 3 months).
Replacement pipes are available from specialised dealers
(JURA original accessory set for frothers).
Clean the inside of the water tank, e.g. with a brush. Further

U

information about the water tank is provided in these instruc­tions for use (see Chapter 5 ‘Maintenance – Descaling the
water tank’).
Traces of milk and coffee may stick to the top and bottom of

U

the cup grille. If this happens, clean the cup grille.

When you switch your JURA off, the spouts used to prepare a speci­ality coffee or milk are rinsed.

T Place one receptacle under the coffee spout and another

under the cappuccino frother.

 Q T Press the On/Off button.

‘Machine is rinsing.’, ‘Milk system is being rinsed.’. The

spouts used to prepare a speciality coffee or milk are rinsed.
The operation stops automatically. Your JURA is switched off.

E When the JURA is switched off with the On/Off button, the

machine consumes less than 0.1W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.

22

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi­function buttons. The following settings can be made:

Programme item Sub-item Explanation

‘Maintenance
status (1/6)’

‘Product settings
(2/6)’

‘Maintenance
settings (3/6)’

‘Machine settings 1
(4/6)’

‘Machine settings 2
(5/6)’

‘Information (6/6)’ ‘Product counter’,

,

‘Clean’
‘Descale’ (only if filter is

not activated),

‘Change the filter’ (only

if filter is activated),

‘Switch-on rinse’,
‘Clean the milk system’
‘Expert mode’

‘Filter’,
‘Water hardness’ (only

if filter is not activated),

‘Switch-on rinse’,
‘Rinse the milk system’

‘Save energy’,
‘Switch off after’,
‘Units’,
‘Factory setting’

‘Choose language’,
‘Display’,
‘Colour scheme’

‘Maintenance counter’,
‘Version’

T Start the required maintenance programme
here.

T Select your settings for speciality coffees and
hot water.

T Indicate whether you are operating your JURA
with or without a CLARIS Blue filter cartridge.

T Adjust the water hardness.
T Change the settings for the switch-on rinse and

milk system rinse.

T Select an energy-saving mode.
T Set the time after which the JURA should switch

off automatically.

T Select the unit for the amount of water.
T Reset the permanently set values of all

products to the factory settings.
T Select your language and the background

colour for the display.

T Keep track of all speciality coffees prepared and
view the number of maintenance programmes
performed.

23

4 Permanent settings in programming mode

Product settings

Product Temperature Coffee strength Amount

Ristretto,
espresso,
coffee
Two ristretti,
two espressi,
two coffees
Latte macchiato,
cappuccino

Portion of milk – – ‘3sec.’–‘120sec.’
Hot water ‘Low’, ‘Normal’,

‘Normal’, ‘High’ ‘extra-mild’, ‘mild’,

‘Normal’, ‘High’ – Volume:

‘Normal’, ‘High’ ‘extra-mild’, ‘mild’,

‘X high’

In the programme item ‘Product settings (2/6)’ you can make indi­vidual settings for all speciality coffees and hot water. The following
settings can be made:

Volume:
‘normal’, ‘strong’,
‘extra-strong’

‘normal’, ‘strong’,
‘extra-strong’

– ‘25ml’–‘450ml’

Example:Proceed as follows to change the amount of milk for a
latte macchiato from
to

‘40sec.’ and the amount of water from ‘45ml’ to ‘40ml’.

Precondition:

 O T Press the P button.

‘Maintenance status (1/6)’

 g T Turn the Rotary Switch until the programme item ‘Product

settings (2/6)’

T Press the

‘Expert mode’

‘16sec.’ to ‘20sec.’, the interval from ‘30sec.’

‘Please select product:’ is displayed.

is displayed.

‘Expert mode’ button.

‘25ml’–‘240ml’

‘25ml’–‘240ml’

(per cup)

Amount of milk:

‘3sec.’–‘120sec.’

Interval: ‘0sec.’–‘60sec.’

Volume: ‘25ml’–‘240ml’

24

E Next select the button of the product for which you would like

to make settings. No product is prepared at this point.

T Press the

‘Latte macchiato’

T Press the ‘Amount of milk’ button.
T Press the

of milk to

T Press the

‘Saved’ appears briefly on the display.

‘Latte macchiato’ button.

‘<’ or ‘>’ button to change setting for the amount

‘20sec.’.

‘Save’ button.

4 Permanent settings in programming mode

T Press the ‘Volume’ button.
T Press the

ume to

T Press the

‘Saved’ appears briefly on the display.

T Press the
T Press the
T Press the

to

T Press the

‘Saved’ appears briefly on the display.
‘Latte macchiato’

 O T Press the P button to exit programming mode.

‘Please select product:’

‘<’ or ‘>’ button to change setting for the fill vol-

‘40ml’.

‘Save’ button.

‘Next’ button.
‘Interval’ button.

‘<’ or ‘>’ button to change setting for the interval

‘40sec.’.

‘Save’ button.

Maintenance settings

In the programme item ‘Maintenance settings (3/6)’ you can make
the following settings:

‘Filter’

U

Activate the CLARIS Blue filter cartridge (see Chapter 1 ‘Pre-

U

paring and using for the first time – Inserting and activating
the filter’).

‘Water hardness’

U

If you do not have a filter cartridge, you will need to set the

U

water hardness (see Chapter 1 ‘Preparing and using for the
first time – Setting the water hardness’).

‘Switch-on rinse’ / ‘Manual’

U

The switch-on rinse must be started manually.

U

‘Switch-on rinse’ / ‘Automatic’

U

The switch-on rinse is started automatically.

U

‘Rinse the milk system’ / ‘After 10 min.’

U

You are prompted to rinse the milk system 10minutes after

U

preparation of a speciality coffee with milk.

‘Rinse the milk system’ / ‘Immediate’

U

You are prompted to rinse the milk system immediately

U

after preparation of a speciality coffee with milk.

25

4 Permanent settings in programming mode

Example:Proceed as follows to make the machine prompt you to

rinse the milk system immediately after preparing a speciality cof-
fee with milk.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Mainte-

 O T Press the P button to exit programming mode.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

nance settings (3/6)’

T Press the

‘Rinse the milk system’

T Press the ‘Immediate’ button.
T Press the

‘Saved’ appears briefly on the display.
‘Maintenance settings (3/6)’

‘Please select product:’

‘Rinse the milk system’ button.

‘Save’ button.

is displayed.

Energy-saving mode

26

In the programme item ‘Machine settings 1 (4/6)’/ ‘Save energy’ you
can permanently set an energy-saving mode:

‘Inactive’

U

All speciality coffees, speciality coffees with milk and hot

U

water can be prepared without having to wait.
The machine must heat up before milk preparation.

U

‘Ac tiv e’ (Energy saving of up to 40%)

U

Soon after the last preparation, the JURA stops heating up.

U

As soon as the energy-saving temperature is reached, this is
indicated in the display by the message
may take several minutes.
The machine must heat up before coffee, hot water or milk

U

preparation.

Example:Proceed as follows to change the energy-saving mode
from

‘Inactive’ to ‘Ac tive’.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Machine

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

settings 1 (4/6)’

is displayed.

‘Energy Save’ – this

4 Permanent settings in programming mode

T Press the ‘Save energy’ button.

‘Save energy’

T Press the ‘Ac tiv e’ button.
T Press the

‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’

 O T Press the P button to exit programming mode.

‘Please select product:’

‘Save’ button.

Automatic switch-off

Unit for amount of water

By instructing your JURA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your JURA switches off automatically after the preset time following
the last action on the machine.

You can set the automatic switch-off time to 15 minutes or

0.5–15hours.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Machine

T Press the

T Press the ‘<’ or ‘>’ button to change the setting.
T Press the

 O T Press the P button to exit programming mode.

You can change the unit for the amount of water from ‘ml’ to ‘oz’.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

settings 1 (4/6)’

‘Switch off after’

‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’

‘Please select product:’

is displayed.

‘Switch off after’ button.

‘Save’ button.

Example:Proceed as follows to change the unit for the amount of
water from

Precondition:

 O T Press the P button.

‘ml’ to ‘oz’.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

27

4 Permanent settings in programming mode

 g T Turn the Rotary Switch until the programme item ‘Machine

 O T Press the P button to exit programming mode.

settings 1 (4/6)’

T Press the

‘Units’

T Press the ‘oz’ button.
T Press the

‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’

‘Please select product:’

is displayed.

‘Units’ button.

‘Save’ button.

Restore factory settings

In the programme item ‘Machine settings 1 (4/6)’/ ‘Factory setting’
you can reset various settings to their factory settings:

‘Machine’

U

All user settings (apart from the ‘filter’ and ‘water hardness’)

U

are reset to factory settings. Your JURA then switches off.

‘Products’

U

The settings (amount of water, aroma, temperature etc.) for

U

any product can be reset individually to the factory settings.
The corresponding double product is also reset to the fac­tory settings at the same time.

‘All products’

U

The settings (amount of water, aroma, temperature etc.) for

U

all products are reset to the factory settings.

‘Display’

U

All display settings are reset to the factory settings.

U

Example:Proceed as follows to reset the values for
factory settings.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Machine

T Press the

T Press the ‘Products’ button.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

settings 1 (4/6)’

‘Factory setting’

is displayed.

‘Factory setting’ button.

‘Espresso’ to the

28

4 Permanent settings in programming mode

T Press the ‘Espresso’ button.

‘Espresso’ / ‘Reset this product to the factory setting?’

T Press the ‘Next’ button.

‘Saved’ appears briefly on the display.
‘Factory setting’

 O T Press the P button to exit programming mode.

‘Please select product:’

Language

Background colour

In this programme item you can set the language used by your
JURA.

E If you choose the wrong language by mistake, you can easily

reset the machine to
gramming mode. Use the Rotary Switch g to select pro­gramme item ‘5/6’ and then press the top left-hand button.

Example:Proceed as follows to change the language from
to

‘Deutsch’.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Machine

T Press the

T Press the ‘Deutsch’ button.

 O T Press the P button to exit programming mode.

In this programme item you can set the background colour for the
display of your JURA.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

settings 2 (5/6)’

‘Choose language’ button.

‘Choose language’

‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen 2 (5/6)’

‘Bitte wählen Sie Ihr Produkt:’

‘English’: Press the P button to enter pro-

‘English’

is displayed.

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Machine

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

settings 2 (5/6)’

is displayed.

29

4 Permanent settings in programming mode

 O T Press the P button to exit programming mode.

T Press the ‘Colour scheme’ button.

‘Colour scheme’

T Press the ‘<’ or ‘>’ button to change the setting.
T Press the

‘Saved’ appears briefly on the display.
‘Machine settings 2 (5/6)’

‘Please select product:’

E The selected background colour only applies on the selection

page of the display showing the speciality coffees.

‘Save’ button.

Querying information

In the programme item
ing information:

‘Product counter’: Number of prepared speciality coffees,

U

speciality coffees with milk and hot water

‘Maintenance counter’: Maintenance status and number of

U

maintenance programmes performed (cleaning, descaling,
changing the filter)
Number of cappuccino frother cleaning operations performed

U

‘Version’: Software version

U

Precondition:

 O T Press the P button.

 g T Turn the Rotary Switch until the programme item ‘Informa-

T Press the

T Press the

 O T Press the P button to exit programming mode.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

tion (6/6)’

The number of speciality coffees prepared is displayed.

‘Information (6/6)’

‘Please select product:’

‘Information (6/6)’ you can view the follow-

is displayed.

‘Product counter’ button.

‘’ button.

30

5 Maintenance

5 Maintenance

Your JURA has the following integrated maintenance programmes:

Rinsing the machine (‘Switch-on rinse’)

U

Rinsing the cappuccino frother (‘Rinse the milk system’)

U

Cleaning the cappuccino frother (‘Clean the milk system’)

U

Changing the filter (‘Change the filter’)

U

Cleaning the machine (‘Clean’)

U

Descaling the machine (‘Descale’)

U

E Clean or descale the machine, rinse the milk system or change

the filter when you are prompted to do so.

E Press the P button to view a list of the maintenance pro-

grammes (
you can see which maintenance programme is due. When the
bar is completely filled with red, your JURA will prompt you to
perform the appropriate maintenance programme.

E In the interests of hygiene, you should clean the milk system

daily when you have been preparing milk.

‘Maintenance status (1/6)’). By referring to the bar

Rinsing the machine

You can initiate the rinse operation manually at any time.

Precondition:

T Place a receptacle under the coffee spout.

 O T Press the P button.

T Press the ‘Switch-on rinse’ button.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

‘Machine is rinsing.’, water flows out of the coffee spout.

The rinse stops automatically.
appears on the display.

‘Please select product:’

31

5 Maintenance

Rinsing the cappuccino
frother

Cleaning the cappuccino
frother

CAUTION

After each milk preparation, the JURA prompts you to perform a milk
system rinse.

Precondition:

T Place a receptacle under the cappuccino frother.

 k T Press the Rotary Switch.

To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.

Precondition:

 O T Press the P button.

T Press the ‘Clean the milk system’ button.

T Pour 250 ml of fresh water into a receptacle and add one

T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk

T Place another receptacle under the cappuccino frother.
T Press the

T Rinse the receptacle thoroughly, fill it with 250ml of fresh

‘Rinse the milk system’ is displayed.

‘Milk system is being rinsed.’, water flows out of the cappuc-

cino frother.
The rinse stops automatically.
appears on the display.

‘Please select product:’ is displayed.

‘Maintenance status (1/6)’

‘Cleaning agent for milk system’

capful of milk system cleaner.

Foamü or Milkz position.

‘Next’ button.
‘Milk system is being cleaned.’, water flows out of the cap-

puccino frother.

‘Water for cleaning milk system’

water and immerse the milk pipe in the water.

‘Please select product:’

32

5 Maintenance

T Empty the other receptacle and place it under the cappuc-

cino frother again.

T Press the

‘Milk system is being cleaned.’, the cappuccino frother and

the pipe are rinsed with fresh water.

‘Please select product:’ appears on the display.

‘Next’ button.

Dismantling and rinsing
the cappuccino frother

Changing the filter

To make sure the cappuccino frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk.

T Remove the milk pipe and rinse it thoroughly under running

water.

T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and one capful of JURA
milk system cleaner. Then rinse the parts thoroughly.

T Reassemble the cappuccino frother.

E Ensure that all individual parts are correctly and firmly con-

nected to ensure correct operation of the cappuccino frother.

T Firmly attach the frother to the connector.

E After 50 litres of water have flowed through, the filter will

cease to work. Your JURA will automatically prompt you to
change the filter.

E After two months, the filter will cease to work. Set the date on

the date plate on the filter holder in the water tank.

E If the CLARIS Blue filter cartridge is not activated in program-

ming mode, you will not be prompted to change the filter.

Precondition:

 O T Press the P button.

T Press the ‘Change the filter’ button.

‘Change filter’ is displayed.

‘Maintenance status (1/6)’

‘Change the filter’

33

5 Maintenance

E If you do not want to start changing the filter just yet, press

the

‘’ button. The prompt ‘Change filter’ remains active.

T Press the

‘Change filter’

T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter

cartridge and filter extension.

T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight

pressure.

T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the

tank.

T Place a receptacle (at least 500 ml) under the cappuccino

frother.

T Turn the setting wheel of the cappuccino frother to the

Steamn position.

T Press the

‘Filter is being rinsed.’, water flows out of the cappuccino

frother.

E You can interrupt rinsing of the filter at any time by pressing

any button. Press the Rotary Switchk to continue rinsing of
the filter.

E The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

‘Next’ button.

‘Next’ button.

Cleaning the machine

CAUTION

34

Rinsing of the filter stops automatically after approximately
500ml. The JURA heats up and is once more ready for use.

After 200preparations or 80switch-on rinses, the JURA will prompt
you to clean it.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

5 Maintenance

E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

E JURA cleaning tablets are available from specialised dealers.

Precondition:

‘Clean machine’ is displayed.

 O T Press the P button.

‘Maintenance status (1/6)’

T Press the ‘Clean’ button.

‘Clean’

E If you do not want to start cleaning just yet, press the ‘’ but-

ton. The prompt

T Press the

‘Clean machine’ remains active.

‘Next’ button.
‘Empty coffee grounds container’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Please press the Rotary Switch.’.

T Place one receptacle under the coffee spout and another

under the cappuccino frother.

 k T Press the Rotary Switch.

‘Machine is being cleaned.’, water flows out of the coffee

spout.
The operation is interrupted,

‘Add cleaning tablet’.

T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.

‘Please press the Rotary Switch.’.

 k T Press the Rotary Switch.

‘Machine is being cleaned.’, water flows repeatedly out of

the coffee spout and the cappuccino frother.
The operation is interrupted,

tainer’

.

‘Empty coffee grounds con-

T Empty the drip tray and coffee grounds container and put

them back into the machine.
Cleaning is now complete. Your JURA is once more ready for
use.

35

5 Maintenance

Descaling the machine

J

CAUTION

CAUTION

CAUTION

CAUTION

The JURA builds up deposits of limescale over time and automati­cally prompts you to descale it when necessary. The degree of calci­fication depends on the hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.

T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam­aged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to
the machine.

T Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approximately 50minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Blue filter cartridge and this is activated,

you will not be prompted to descale.

36

Precondition:

‘Decalcify machine’ is displayed.

 O T Press the P button.

‘Maintenance status (1/6)’

T Press the ‘Descale’ button.

‘Descale’

E If you do not want to start descaling just yet, press the ‘’ but-

ton. The prompt

T Press the

‘Decalcify machine’ remains active.

‘Next’ button.
‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Pour descaling agent into water tank’.

5 Maintenance

T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets in a receptacle

holding 500ml of water. This may take several minutes.

T Pour the solution into the empty water tank and insert it into

the machine.

‘Please press the Rotary Switch.’

T Carefully pull the cappuccino frother down and off.

T Place a receptacle under the connector of the cappuccino

frother.

 k T Press the Rotary Switch.

‘Machine is being descaled.’, water flows repeatedly out of

the connector of the cappuccino frother.
The operation stops automatically,

‘Empty drip tray’.

T Empty the receptacle under the connector of the cappuc-

cino frother.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the

tank.

‘Please press the Rotary Switch.’

T Refit the cappuccino frother.
T Place one receptacle under the coffee spout and another

under the cappuccino frother.

 k T Press the Rotary Switch.

‘Machine is being descaled.’, water flows out of the cappuc-

cino frother and the coffee spout.

‘Machine is heating.’, ‘Machine is rinsing.’, water flows out of

the coffee spout.
The operation stops automatically,

‘Empty drip tray’.

T Empty the drip tray and coffee grounds container and put

them back into the machine.
Descaling is now complete. Your JURA is once more ready for
use.

E If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

37

5 Maintenance

Cleaning the bean
container

Descaling the water tank

Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.

Precondition:

 Q T Switch the machine off with the On/Off button.
 3 T Switch the machine off at the power switch.

T Open the bean container cover and remove the aroma pres-

T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the

Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.

T Remove the water tank.
T If you use a CLARIS Blue filter cartridge, remove this.
T Completely fill the water tank and dissolve 3 JURA descaling

T Leave the water tank with the descaling solution for several

T Empty the water tank and rinse it thoroughly.
T If you use a CLARIS Blue filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the

‘Fill bean container’ is displayed.

ervation cover.

aroma preservation cover and the bean container cover.

tablets in it.

hours (e.g. overnight).

tank.

38

6 Display messages

Message Cause/Result Action

‘Fill water tank’ The water tank is empty.

You cannot prepare any products.

‘Empty coffee
grounds
container’

‘Empty drip tray’ The drip tray is full. You cannot

‘Drip tray not
fitted’

‘Please press the
Rotary Switch.’

‘Fill bean
container’

‘Rinse the milk
system’

‘Change filter’ The filter cartridge no longer

‘Clean machine’ The JURA is prompting you to

‘Decalcify
machine’

‘Not enough
ground coffee’

The coffee grounds container is
full. You cannot prepare any
products.

prepare any products.

The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
The JURA is prompting you to
perform a rinse or continue a
maintenance programme that
was already started.
The bean container is empty.
You cannot prepare any products.

The JURA requests a milk system
rinse.

works.

clean it.

The JURA is prompting you to
descale it.

There is insufficient ground
coffee in the machine; the JURA
stops the operation.

T Fill the water tank (see Chapter 1
‘Preparing and using for the first time –
Filling the water tank’).

T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).

T Empty the drip tray.
T Clean and dry the metal contacts on the

back of the drip tray.

T Fit the drip tray.

T Press the Rotary Switch to start the

rinse or to continue the maintenance
programme.

T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).

TPress the Rotary Switch to start rinsing
the milk system.

T Replace the CLARIS Blue filter car­tridge(see Chapter 5 ‘Maintenance –
Changing the filter’).

T Perform cleaning(see Chapter 5
‘Maintenance – Cleaning the machine’).

T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).

T The next time you prepare a beverage,
add more ground coffee (see Chapter 2
‘Preparation – Ground coffee’).

6 Display messages

39

7 Troubleshooting

7 Troubleshooting

Problem Cause/Result Action

When preparing a latte
macchiato, the typical
three layers do not
form.

Insufficient foam is
produced when the
milk is frothed or
milk sprays from the
cappuccino frother.

Coffee only comes out
in drips when it is being
prepared.

Water hardness cannot
be adjusted.

‘Fill bean container’ is

not displayed although
the bean container is
empty.

‘Empty drip tray’ is

always displayed.

The cappuccino frother is
dirty.

Coffee or ground coffee
has been ground too
finely and is blocking the
system.The same filter
cartridge may have been
used several times or the
water hardness set
incorrectly in the pro­gramming mode.
The CLARIS Blue filter
cartridge is activated.

The bean monitor is dirty.

The metal contacts of the
drip tray are dirty or wet.

–

TTurn the setting wheel of the cappuc­cino frother to the far right and the Milk
Foam positionü.
TChange the length of the interval to at
least 30 seconds in programming
mode(see Chapter 4 ‘Permanent settings
in programming mode – Product
settings’).

T Clean the cappuccino frother(see
Chapter 5 ‘Maintenance – Cleaning the
cappuccino frother’).
TCheck that the air intake pipe is fitted
on the cappuccino frother.
TRinse or replace the air intake pipe.
You will find a replacement in the
Welcome Pack.

T Put the grinder on a coarser setting or
use coarser ground coffee (see Chapter 2
‘Preparation – Adjusting the grinder’).
T Perform descaling(see Chapter 5
‘Maintenance – Descaling the machine ’).

T Deactivate the filter cartridge in
programming mode.

T Clean the bean container(see Chapter 5
‘Maintenance – Cleaning the bean
container’).

T Clean and dry the metal contacts on the
back of the drip tray.

40

Problem Cause/Result Action

‘Fill water tank’ is

displayed although the
water tank is full.

Little or no water or
steam comes out of the
cappuccino frother.
The pump is very quiet.

The water tank float is
trapped.

The connector of the
cappuccino frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.

T Descale the water tank(see Chapter 5
‘Maintenance – Descaling the water
tank’).

T Remove the cappuccino frother.
T Unscrew the black connector with the

aid of the hexagonal hole on the
measuring spoon for ground coffee.

T Clean the connector thoroughly.
T Screw the connector back on by hand.
T Carefully tighten it using the hexagonal

hole on the measuring spoon, turning by

no more than a quarter of a rotation.
Grinder is making a
very loud noise.

There are foreign objects
in the grinder.

T Contact customer support in your

country(see Chapter 11 ‘JURA contact

details/ Legal information’).

‘ERROR 2’ is displayed. If the machine was

exposed to the cold for

T Warm the machine at room tempera-

ture.

a long period of time,
heating is disabled for
safety reasons.

Other

‘ERROR’

messages are displayed.

–

T Switch the JURA off at the power switch.

Contact customer support in your

country(see Chapter 11 ‘JURA contact

details/ Legal information’).

7 Troubleshooting

E If you were unable to solve the problem, contact customer

support in your country(see Chapter 11 ‘JURA contact details/
Legal information’).

41

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

Transport/ Emptying the
system

Disposal

In order to protect the JURA from frost during transport, the system
must be emptied.

Precondition:

T Carefully pull the cappuccino frother down and off.
T Place a receptacle under the connector of the cappuccino

T Press the

T Press the

T Remove and empty the water tank.

 g T Turn the Rotary Switch until

 Q T Press the On/Off button.

Please dispose of old machines in an environmentally neutral way.

H

Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.

‘Please select product:’ is displayed.

frother.

‘1 portion milk’ button.
‘Machine is heating.’

As soon as the machine has heated up, ‘Please select pro-

duct:’

appears.

‘1 portion milk’ button again.
‘1 portion milk’, hot steam is discharged from the connector.

‘60sec.’ is displayed.

Steam will continue to be discharged from the connector
until the system is empty.

‘Fill water tank’

The JURA is switched off.

42

9 Technical data

9 Technical data

Voltage 220–240V~, 50Hz
Power 1450W
Conformity mark

Energy consumption

‘Save energy’ / ‘Ac tive’

Energy consumption

‘Save energy’ / ‘Inactive’

Pump pressure static, max. 15bar
Holding capacity of water tank 2.1l
Holding capacity of bean container 250g
Holding capacity of coffee grounds
container
Cable length approx. 1.1m
Weight approx. 10.9kg
Dimensions (WHD) 28.5  34.2  43.3cm

Information about the Swiss energy label on your automatic coffee
machine is available online at www.ch.jura.com.

A

Approx. 5Wh

approx. 12Wh

max. 16 portions

43

10 Index

10 Index

A

Addresses 48
Aroma preservation cover

Bean container with aroma preservation
cover 4

Automatic switch-off 27

B

Background colour 29
Bean container

Bean container with aroma preservation
cover 4
Cleaning 38
Filling 10

Bus bar

Technical data 43

Button

On/Off button 5
P button (programming) 5

C

Cappuccino 16
Cappuccino frother

Cleaning 32
Dismantling and rinsing 33
Rinsing 32

CLARIS Blue filter cartridge

Changing 33
Inserting and activating the filter 12

Cleaning

Bean container 38
Cappuccino frother 32

Machine 34
Coffee 16
Coffee grounds container 4
Coffee spout

Height- and width-adjustable coffee

spout 4
Consistency of grind

Adjusting the grinder 19

Grinder adjustment switch 4
Contact details 48

Cover

Bean container 4
Storage compartment 4

Water tank 4
Cup grille 4
Customer support 48

D

Degree of water hardness 13
Descaling

Machine 36

Water tank 38
Determining and adjusting the water

hardness 13

Dismantling

Cappuccino frother 33
Display 5
Display messages 39
Display settings 29
Disposal 42
Double product 16
Drip tray 4

E

Emptying the system 42
Energy-saving mode 26
Errors

Troubleshooting 40
Espresso 16

F

Factory settings

Restore factory settings 28
Filler funnel

Filler funnel for ground coffee 4
Filling

Bean container 10

Water tank 10
Filter

Changing 33

Inserting and activating the filter 12
First-time use 11
Frother

Cappuccino frother 4

44

10 Index

G

Grinder adjustment switch 4
Ground coffee 18

Measuring spoon for ground coffee 4

H

Hotline 48
Hot water 20
Hot-water nozzle 4

I

Instant coffee

Ground coffee 18

Internet 10

J

JURA

Contact details 48
Internet 10

L

Language 29
Latte macchiato 16

M

Machine

Cleaning 34
Descaling 36
Regular maintenance 22
Rinsing 31
Setting up 10
Switching off 22

Switching on 21
Mains cable 4
Maintenance 31

Daily maintenance 21

Regular maintenance 22
Maintenance settings 25
Measuring spoon for ground coffee 4
Messages, display 39
Milk

Connecting milk 14
Milk foam 17
Milk system cleaning

Cleaning the cappuccino frother 32

Milk system rinsing

Rinsing the cappuccino frother 32

Milk, warm 17

P

Permanently setting the water for the cup

size 19

Permanent settings in programming

mode 23
Power switch 4
Preparation 15

Cappuccino 16
Coffee 16
Espresso 16
Ground coffee 18
Hot water 20
Latte macchiato 16
Milk 17
Two speciality coffees 16

Problems

Troubleshooting 40
Product settings 24
Programming mode 23

Automatic switch-off 27

Background colour 29

Energy-saving mode 26

Language 29

Maintenance settings 25

Product settings 24

Querying information 30

Restore factory settings 28

Setting the water hardness 14

Unit for amount of water 27
Proper use 6

Q

Querying information 30

R

Regular maintenance 22
Rinsing

Cappuccino frother 32

Machine 31
Rotary Switch 5

45

10 Index

S

Safety 6
Safety information 6
Settings

Maintenance settings 25
Permanent settings in programming
mode 23

Setting up

Setting up the machine 10
Short operating instructions 10
Switching off 22
Switching on 21
Switch-off

Automatic switch-off 27
Symbol description 3

T

Technical data 43
Tel 48
Transport 42
Troubleshooting 40
Two products 16

U

Unit for amount of water 27
Use, First-time 11

W

Warm milk 17
Water hardness

Determining the water hardness 13

Setting the water hardness 14
Water tank 4

Descaling 38

Filling 10
Website 10

46

47

J71962/J90-J95-J500/en/201505

11 JURA contact details/ Legal information

11 JURA contact details/ Legal information

JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. [phone]

@ You will find additional contact details for your country at

www.jura.com.

Directives

Technical changes

Feedback

Copyright

The machine complies with the following directives:

2006/95/EC– Low Voltage Directive

U

2004/108/EC– Electromagnetic Compatibility

U

2009/125/EC– Ecodesign Directive

U

2011/65/EU– RoHS Directive

U

We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your JURA may vary.

Your opinion is important to us! Use the contact details at
www.jura.com.

The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.

48