Juno JKU2048 User Manual

2222659-15

GEBRAUCHSANWEISUNG
OPERATING INSTRUCTION

D
t

JKU 2048

10 Printed on paper manufactured with environmentally sound proceses

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Use and Control

Before Use / Starting the appliance / Temperature control / Internal parts . . . . . . . . . . . . . .11

Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Maintenance Defrosting / Cleaning / Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Something not Working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Customer Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Door reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Installation

Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Pannelling the door / Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Building-in the appliance under a worktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Safety Instructions

t

Please read these operating instructions
carefully before installing the appliance. These
warnings are provided in the interests of your
safety. Ensure you fully understand them before
installing or using the appliance. If you are
unsure about the meaning of these warnings
contact the Customer Care Department.

Domestic Use

¥ The domestic refrigerators and freezers are

designed to be used specifically for the storage of
edible foodstuffs only.

¥ Check the appliance for transport damage. Under

no circumstances should a damaged appliance be
installed. In the event of damage please contact
your retailer.

¥ This appliance is heavy. The edges and projecting

parts of the cabinet may be sharp. Be careful when
moving the cabinet and always use gloves.

¥ Any electrical work required to install this appliance

should be carried out by a qualified electrician or
competent person.

¥ Ensure that the appliance does not stand on the

electrical supply cable.

¥ Do not use electrical appliances inside the

appliance

¥ Do not keep carbonated drinks or bottles in the freezer

compartment. The glass bottles may break.

¥ Ice lollies can cause Ôfrost/freezer burnsÕ if

consumed straight from the freezer.

¥ It is dangerous to try and alter the specifications or

modify this product in any way.

¥ Under no circumstances should you attempt to

repair the appliance yourself. Refer to your local
Service Centre, and always insist on genuine spare
parts.

Child Safety

¥ This appliance is designed to be operated by

adults only. There is a risk of suffocation! Keep
packaging material away from children!

¥ In case of disposal of the appliance, cut off the

supply cable as close as possible and make
thelock unusable, to prevent children from closing
themselves inside the appliances.

Environment Protection

¥ This appliance does not contain gasses which

could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with the
urban refuse and rubbish. Avoid damaging the
cooling unit, especially at the rear near the heat
exchanger. Information on your local disposal sites
may be obtained from your municipal authorities.

Contents

Instructions for the use of the instructions booklet

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Disposal

Appliance Packaging Information

¥ The materials used on this appliance marked with the symbol are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

All materials are environmentally sound!

Disposal of old Appliances

Information concerning collection schedules or locations can be obtained from your local Council or
Environmental Health Office.

Use and Control

Before Use

Wait two hours before connecting the
appliance to allow the oil to flow back in the
compressor.

¥ Before using the appliance for the first time, wash

the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.

Do not use detergents or abrasive
powders, as these will damage the finish.

¥ Remove safety elements used for transportation.

Starting the appliance

¥ Insert the plug into the wall socket and turn the

thermostat knob clockwise beyond position ÇOÈ
(OFF).

¥ Turn the thermostat control to the required setting.

Temperature Control

¥ The thermostat control situated inside the fridge

compartment regulates the temperature of the
appliance.

¥ It allows you to adjust the temperature inside the

refrigerator according to use and external
conditions.
¥

Setting ã1Ò = hightest temperature, warmest
setting

¥ Setting ã6Ò = lowest temperature, coldest

setting.

¥ Setting ã0Ò = Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

¥ The shelves can be removed for cleaning.

¥ To permit storage of food packages of various

sizes, the shelves can be placed at different
heights.

¥ To remove the internal shelf pull forward until it can

be tipped up or down and removed.

¥ Please do the same in reverse to insert the shelf at

a different height.

11

12

¥ For better use of space, the front half-shelves can

lie over the rear ones.

The glass shelf above the vegetable drawers
and the bottle shelf should always remain in
position, to ensure correct air circulation.

Door shelves

¥ To permit storage of food packages of various

sizes, the central door shelf can be adjusted in
height.

¥ Gradually pull the shelf in the direction of the

arrows until it comes free, then reposition as
required.

¥ For more thorough cleaning, the top and bottom

door sheves can be removed by pulling them in the
direction of the arrows, then refitting them in
position.

D338

Hints

Saving Energy

¥ Pay careful attention to where the cabinet is

placed. See the section ÒInstallationÓ. When
installed correctly the cabinet will consume less
energy.

¥ Try to avoid keeping the doors open for long

periods or opening the doors too frequently as
warm air will enter the cabinet and cause the
compressor to switch on unnecessarily often.

¥ If the ambient temperature is high, the thermostat

knob is on the coldest setting (higher numbers) and
the appliance is fully loaded, the compressor may
run continuously, causing frost or ice to form on the
evaporator. If this happens, turn the knob to a
warmer setting (lower numbers) to allow automatic
defrosting and so a saving in electricity
consumption.

¥ Do not place warm foods inside the appliance.

Allow warm foods to cool first.

Hints for refrigeration

¥ Do not store warm food or evaporating liquids in

the refrigerator and do cover or wrap up the food,
particularly if it has a strong smell.

To help you use your refrigerator correctly, here are
some useful hints:

¥ Raw meat (beef, pork, lamb & poultry): wrap in

polythene bags and place on top of the salad
compartment, this being the coldest spot in the
refrigerator.

Meat can only be stored safely in this way for
one or two days at the most.

¥ Cooked food, cold cuts, jelly, etc.: these should

be well covered and can be stored on any of the

glass shelves.

¥

Fruit & vegetables: these should be thoroughly
cleaned and placed in the bottom bins.

¥ Butter & cheese: these should be placed in

special airtight containers or wrapped in aluminium
foil or polythene bags to keep out as much air as
possible.

¥ Milk bottles: these should have a top and should

be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.

CP1SIG

13

Maintenance

Unplug the appliance before carrying out
any maintenance operation.

Warning

This appliance contains hydrocarbons in its

cooling unit maintenance and recharging must
therefore only be carried out by authorised
technicians.

Defrosting

¥ Defrosting the refrigerator compartment is

automatic. The defrost water drains out through a
trough into a container at the back of the appliance,
above the motor compressor, where it evaporates.

¥ It is important to periodically clean the defrost

water drain hole.

Cleaning

Never use metal objects for cleaning your
appliance as it may get damaged.

NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong
odour.

Clean the inside with warm water and bicarbonate of
soda. Rinse and dry thoroughly.

To guarantee a safe operation of the fridge, once a
year remove the ventilation grille at the base and
clean the air channels with a vacuum cleaner.

When the appliance is not in use

Disconnect the appliance from the electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.

Changing the light bulb

¥ Should the interior light fail to work, first switch off

the appliance and disconnect from the electricity
supply, then replace the bulb as follows:

1. unscrew the light cover securing screws.

2. unhook the moving part by pressing it as shown
in the figure.

3. Replace the bulb by other with another with the
same charcteristics.

D037

D411

Technical specifications

The technical data is indicated in the rating plate on the left side inside the appliance.

14

Something not Working

Problems may be due to causes which can easily be solved before calling the Technical Service. Please
follow these instructions:

Weight surpasses the storage limit of the door shelf so spread weight more evenly or
take some products out.

The appliance is not properly installed. Please look in the ÒBuilding-inÓ section.

Set a lower temperature.
Distribute the food products to allow cold air to circulate around them.
Make sure that the door is completely closed and that the insulating strip is complete
and clean.
The temperature where the cabinet is placed is above normal room temperature.

Set a warmer temperature.

Turn the thermostat knob to a lower number.
The temperature where the cabinet is placed is above normal room temperature.
Check that the ventilation is sufficient and that the ventilation openings are
unobstructed.
The cause could be the introduction of large quantities of food and/or frequent
opening/closing of the door.

Sometimes is normal. During automatic defrosting frost thaws on the cooling plate.

Place the drain hose at the back of the cabinet above the drain bowl.

Sometimes this is normal. Temperature control may cause clicking sounds when the
system is connected or disconnected.
The injected cooling gas may produce a gurgling sound while passing through the
tubes.
The motor may cause a humming noise and/or slight bumping.
The insulation material used has a tendency to slighly increase noise levels, how ever it
allows for much better insulation and a lower energy consumption.

Door does not close

It is too warm inside the refrigerator

It is too cold inside the refrigerator.

The compressor works continuously.

There is water inside/outside the refrigerator.

Water comes out on the floor.

Noises

SYMPTOM SOLUTION

¥ Model Number (PNC)

¥ Serial Number (S-No.)
This information can be found on the rating plate

inside the cabenit on the left hand wall. We
recommend that you enter this information here, so
that it is handy if needed.

If you cannot find the remedy for a malfunction in
these operating instructions, please contact your
dealer or our customer service department and
consult the Guarantee card.
Selective ordering of replacement parts can save
unnecessary travel and costs.
For this reason always provide the following
appliance information:

¥ Model Name

Customer service and spare parts

Dimensions

Height

820 mm

593 mm

570 mm

Width

Depth

15

1. Pull off the ventilation grille (D), which is a clip-on
fit. Remove the bottom hinge (E) by unscrewing its
two fixing screws.

2. Remove the plugs (G) and fit them on the opposite
side.

3. Remove the door (4).

4. Unscrew pin (2) and screw it onto the opposite
side.

5. Refit the door.

6. Refit the bottom hinge on the opposite side using
the two screws previously removed.

7. Slide the hole cover (F) off the ventilation grille (D)
and fit it on the opposite side.

8. Refit the ventilation grille, clipping it into place.

9. Remove the clip-in screw covers, then move the
handle to the opposite side. Holes which are not
used must be masked with the plastic plugs
previously removed from the opposite side.

Warning!

If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.

Door reversal

Installation

Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible fluid
leakages.

¥ During normal operation, the condenser and

compressor at the back of the appliance heat up
considerably. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.

¥

Important: if the supply cable is damaged, it must
be replaced by authorized service or qualified
personnel using a special cable of the same type.

Positioning

¥ Unpack the cabinet and check that it is in good

condition and free of any transport damage.

¥ Place the refrigerator away from direct sunlight and

heat sources.

¥ Avoid prolonged exposure of the appliance to

direct sunlight.

¥ For safety reasons, minimum ventilation must be

as shown in Fig.

Attention: keep ventilation openings clear of
obstruction.

¥ Two adjustable feet at the cabinet base allow

accurate levelling of the appliance.

The climate classification can be found on the rating
plate, which is located inside the cabinet on the left
hand wall.

2

min.
50cm

PR215

The following table shows which ambient
temperature is correct for each climate classification:

16

Climate
classification

SN +10 to +32¡C

+16 to +32¡C

+18 to +38¡C

+18 to +43¡C

N

ST

T

for an ambient temperature of

Panelling the door

1. Take off the door frame section opposite to the
door handle.

2. Loosen, without removing them, all remaining
screws securing the door frame.

3. Slide in the decor panel from the frameless side,
then fasten again the frame to the door including
the previously removed frame section.

Note

The overall dimensions of the decor panel must be 1
to 2 mm less than those of the door, with a maximum
thickness of 4 mm.

Electrical connection

Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.

Important
The appliance must be earthed.

The power supply cable plug is provided with a
contact for this purpose.

If the domestic power supply socket is not
earthed. connect the appliance to a separate
earth in compliance with current regulations,
consulting a specialist technician.

The Manufacturer declines all
responsibility if the above safety
precautions are not observed.

This appliance complies with the following E.E.C.
Directives:

- 87/308 EEC of 2/6/87 relative to radio
interference suppression.

- 73/23 EEC of 19.2.73 (Low Voltage
Directive)

and subsequent modifications.

- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.

Attention!

It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.

PR121

17

Building in the appliance under a worktop

Dimensions of the recess

The dimensions of the recessed installation area
must correspond with those indicated in the figure.

¥ Holes (H) in the top hinges are used for fixing the

appliance to the worktop.

Installation kit

¥ If the recess height is 870 mm, the appropriate

fitting kit must be used.

¥ The kit contains the following parts:

- 1 ventilation grille;

- 2 adjustable feet;

- 2 non-adjustable feet;

- 1 set of screws

- 1 instructions.

923 730 670