T1600 Core Router
Interface Module Reference
June 2013
This guide provides an overview and description of the PICs supported by the Juniper
Networks T1600 Core Router.
Contents
T1600 PIC Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
High Availability Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
T1600 PICs Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ATM2 IQ PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Channelized PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DS3 and E3 PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fast Ethernet PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Gigabit Ethernet PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
10-Gigabit Ethernet PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
40-Gigabit Ethernet PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
100-Gigabit Ethernet PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Services PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SONET/SDH PICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
T1600 FPCs Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
T1600 PIC Combination Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
T1600 PIC/FPC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs) . . . . . . . . . . . . . . . . . . 19
PIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs) . . . . . . . . . . . . . . . . . 20
PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs) . . . . . . . . . . . . . . . . . 22
PIC/FPC Compatibility (Type 4 FPCs and Type 4 PICs) . . . . . . . . . . . . . . . . . 23
ATM2 E3 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ATM2 OC3/STM1 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ATM2 OC12/STM4 IQ PICs (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ATM2 OC48/STM16 IQ PIC with SFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . 33
Channelized DS3 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router) . . . . . . . . . . . . . . . 38
Channelized E1/T1 Enhanced IQ (IQE) PIC (T1600 Router) . . . . . . . . . . . . . . . . . . 42
Channelized OC3 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router) . . . . . 47
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router) . . . 52
1Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T1600 Router) . . . 58
Channelized STM1 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . 65
E3 IQ PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Fast Ethernet PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Gigabit Ethernet PICs with SFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Gigabit Ethernet IQ PICs with SFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . 75
Gigabit Ethernet IQ2 PICs with SFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . 77
Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (T1600 Router) . . . . . . . . . 81
10-Gigabit Ethernet IQ2 PIC with XFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . 85
10-Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with XFP (T1600 Router) . . . . . . 88
10-Gigabit Ethernet PIC with XENPAK (T1600 Router) . . . . . . . . . . . . . . . . . . . . . 91
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600
Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
10-Gigabit Ethernet LAN/WAN PIC with XFP (T1600 Router) . . . . . . . . . . . . . . . 96
10-Gigabit Ethernet DWDM PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . 99
10-Gigabit Ethernet DWDM OTN PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . 101
40-Gigabit Ethernet PIC with CFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . 103
100-Gigabit Ethernet PIC with CFP (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . 106
MultiServices PICs (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
SONET/SDH OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router) . . . . . 113
SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (T1600 Router) . . . . . . . . . 117
SONET/SDH OC12/STM4 Enhanced IQ (IQE) PIC with SFP (T1600 Router) . . . 120
SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T1600 Router) . . . . . . . 123
SONET/SDH OC48c/STM16 PIC with SFP (T1600 Router) . . . . . . . . . . . . . . . . . 126
SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T1600 Router) . . 129
SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP (T1600 Router) . . . . . . . 133
SONET/SDH OC192c/STM64 PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . 136
SONET/SDH OC192/STM64 PICs with XFP (T1600 Router) . . . . . . . . . . . . . . . . 139
SONET/SDH OC768c/STM256 PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . 142
Tunnel Services PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
40-Gigabit Tunnel Services PIC (T1600 Router) . . . . . . . . . . . . . . . . . . . . . . . . . 146
Junos OS Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Copyright © 2013, Juniper Networks, Inc.2
T1600 PIC Description
PICs provide the physical connection to various network media types, receiving incoming
packets from the network and transmitting outgoing packets to the network. During this
process, each PIC performs framing and line-speed signaling for its media type. Before
transmitting outgoing data packets, the PICs encapsulate the packets received from the
FPCs. Each PIC is equipped with an ASIC that performs control functions specific to the
media type of that PIC.
PICs are hot-removable and hot-insertable. You can install up to four PICs in each Type
1, 2, and 3 FPC, one PIC in each T640 Enhanced Scaling FPC4 or Enhanced Scaling
FPC4-IP, and one or two PICs in each T640 Enhanced Scaling FPC4. Type 1 and Type 2
PICs have captive screws at their upper and lower corners. Type 3 PICs have an upper
ejector handle and a lower captive screw. Type 4 PICs have an upper ejector handle and
a lower ejector handle.
The router supports various PICs, including ATM,Channelized,Gigabit Ethernet, IP Services,
and SONET/SDH interfaces. Blank PICs resemble other PICs but do not provide any
physical connection or activity. When a slot is not occupied by a PIC, you must insert a
blank PIC to fill the empty slot and ensure proper cooling of the system.
T1600 PIC Description
Related
Documentation
T1600 PIC Combination Limitations on page 18•
• T1600 PICs Supported on page 5
3Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
High Availability Features
High availability features include Routing Engine redundancy, graceful Routing Engine
switchover (GRES), nonstop bridging, nonstop active routing, graceful restart for routing
protocols, Virtual Router Redundancy Protocol (VRRP), and unified in-service software
upgrade (ISSU). Some high availability features are not supported by all platforms and
all PICs. For information about the first supported Junos OS Release for these features
by PIC and platform, see the Junos OS High Availability Configuration Guide.
Related
Documentation
T1600 PIC Description on page 3•
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.4
T1600 PICs Supported
Table 1 on page 5 through Table 14 on page 12 list the PICs supported by the T1600
router by PIC family.
•
ATM2 IQ PICs on page 5
•
Channelized PICs on page 6
•
DS3 and E3 PICs on page 7
•
Fast Ethernet PICs on page 7
•
Gigabit Ethernet PICs on page 7
•
10-Gigabit Ethernet PICs on page 10
•
40-Gigabit Ethernet PICs on page 11
•
100-Gigabit Ethernet PICs on page 11
•
Services PICs on page 12
•
SONET/SDH PICs on page 12
T1600 PICs Supported
ATM2 IQ PICs
Table 1 on page 5 lists the ATM2 IQ PICs supported by the T1600 router.
Table 1: ATM2 IQ PICs Supported by the T1600 Router
PB-2E3-ATM24“ATM2 E3 IQ PIC (T1600
Router)” on page 25
2“ATM2 OC3/STM1 IQ PIC
(T1600 Router)” on page 27
“ATM2 OC12/STM4 IQ PICs
(T1600 Router)” on page 30
•
ATM2 OC12/STM4 IQ PIC
2
PB-2OC3-ATM2-SMIR
PB-2OC12-ATM2-SMIR
•
10 ft (3.05 m) posilock
SMB to BNC cable
(provided)
•
Four pairs of Rx and Tx
coaxial cables
•
Optical: SC/PCPB-2OC3-ATM2-MM
•
Optical: SC/PCPB-2OC12-ATM2-MM
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
8.5Coaxial:
8.5
8.5
•
ATM2 OC12/STM4 IQ PIC
with SFP (T1600 Router)” on
page 33
•
1
Optical: SC/PCPB-1OC12-ATM2-MM
8.5
PB-1OC12-ATM2-SMIR
•
Optical: LC/PCPB-1OC48-ATM2-SFP1“ATM2 OC48/STM16 IQ PIC
8.5
5Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Channelized PICs
•
Table 2 on page 6 lists the channelized IQ PICs supported by T1600 router.
•
Table 3 on page 6 lists the enhanced channelized IQ (IQE) PICs supported by T1600
router.
Table 2: Channelized IQ PICs Supported by the T1600 Router
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
PB-4CHDS3-QPP4“Channelized DS3 IQ PIC
(T1600 Router)” on page 36
•
StandardDS3 BNC coaxial
cable interfaces
•
Optical: SC/PCPB-1CHOC3-SMIR-QPP1“Channelized OC3 IQ PIC
(T1600 Router)” on page 45
•
Optical: SC/PCPB-1CHSTM1-SMIR-QPP1“Channelized STM1 IQ PIC
(T1600 Router)” on page 63
Table 3: Channelized Enhanced IQ (IQE) PICs Supported by the T1600 Router
PB-4CHDS3-E3-IQE-BNC4“Channelized DS3/E3
Enhanced IQ (IQE) PIC (T1600
Router)” on page 38
PB-1OCHE1-T1-IQE-RJ4810“Channelized E1/T1 Enhanced
IQ (IQE) PIC (T1600 Router)”
on page 42
Enhanced IQ (IQE) PIC with
SFP (T1600 Router)” on
page 47
•
StandardDS3 BNC coaxial
cable interfaces
•
120-ohm RJ-48C
connector (female)
•
Optical: LC/PCPB-2CHOC3-STM1-IQE-SFP2“Channelized OC3/STM1
8.5Coaxial
8.5
8.5
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
9.3Coaxial
9.5
9.3
“Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router)” on page 52
•
Channelized OC12/STM4
•
Optical: LC/PCPB-1CHOC12-STM4-IQE-SFP1
Enhanced IQ (IQE) PIC with
SFP
•
Channelized OC12/STM4
•
Optical: LC/PCPB-4CHOC12-STM4-IQE-SFP4
Enhanced IQ (IQE) PIC with
SFP (Type 2)
9.3
9.4
Copyright © 2013, Juniper Networks, Inc.6
T1600 PICs Supported
Table 3: Channelized Enhanced IQ (IQE) PICs Supported by the T1600 Router (continued)
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
•
Channelized OC12/STM4
Enhanced IQ (IQE) PIC with
SFP (Type 3)
Enhanced IQ (IQE) PIC with
SFP (T1600 Router)” on
page 58
DS3 and E3 PICs
Table 4 on page 7 lists the DS3 and E3 PICs supported by T1600 router.
Table 4: DS3 and E3 PICs Supported by the T1600 Router
PB-4DS3-E3-IQE-BNC4“DS3/E3 Enhanced IQ (IQE)
PIC (T1600 Router)” on
page 65
PB-4E3-QPP4“E3 IQ PIC (T1600 Router)”on
page 68
•
Optical: LC/PCPC-4CHOC12STM4-IQE-SFP4
•
Optical: LC/PCPB-1CHOC48-STM16-IQE-SFP1“Channelized OC48/STM16
•
StandardDS3 BNC coaxial
cable interfaces
•
StandardDS3 BNC coaxial
cable interfaces
10.1
9.4
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
9.3R2Coaxial
8.5Coaxial
Fast Ethernet PICs
Table 5 on page 7 lists the Fast Ethernet PICs supported by T1600 router.
Table 5: Fast Ethernet PICs Supported by the T1600 Router
PB-4FE-TX4“Fast Ethernet PIC (T1600
Router)” on page 70
Gigabit Ethernet PICs
•
Table 6 on page 8 lists the Gigabit Ethernet PICs supported by T1600 router.
•
Table 7 on page 8 lists the Gigabit Ethernet IQ PICs supported by T1600 router.
•
RJ-45
•
Two-pair, Category 5
unshielded twisted-pair
•
Pinout: MDI noncrossover
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
8.5
7Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Table 8 on page 9 lists the Gigabit Ethernet IQ2 PICs supported by T1600 router.
•
Table 9 on page 10 lists the Gigabit Ethernet Enhanced IQ2 PICs supported by T1600
router.
Table 6: Gigabit Ethernet PICs Supported by the T1600 Router
“Gigabit Ethernet PICs with
SFP (T1600 Router)” on
page 72
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
•
Gigabit Ethernet PIC with
SFP
•
Gigabit Ethernet PIC with
SFP
•
Gigabit Ethernet PIC with
SFP
•
Gigabit Ethernet PIC with
SFP
•
PB-1GE-SFP1
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-2GE-SFP2
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-4GE-SFP4
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PC-10GE-SFP10
Optical: LC
•
Copper: RJ-45
8.5
Table 7: Gigabit Ethernet IQ
“Gigabit Ethernet IQ PICs with SFP (T1600 Router)” on page 75
•
Four-pair, Category 5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
Copyright © 2013, Juniper Networks, Inc.8
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
Table 7: Gigabit Ethernet IQ (continued)
T1600 PICs Supported
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
•
Gigabit Ethernet IQ PIC with
SFP
•
Gigabit Ethernet IQ PIC with
SFP
Table 8: Gigabit Ethernet IQ2
“Gigabit Ethernet IQ2 PICs
with SFP (T1600 Router)” on
page 77
•
PB-1GE-SFP-QPP1
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-2GE-SFP-QPP2
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
PIC with SFP
•
Type2 Gigabit Ethernet IQ2
PIC with SFP
•
Type3 Gigabit Ethernet IQ2
PIC with SFP
••
Optical: LCType 1 Gigabit Ethernet IQ2
•
Copper: RJ-45
•
Four-pair, Category 5
8.5PB-4GE-TYPE1-SFP-IQ24
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-8GE-TYPE2-SFP-IQ28
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-8GE-TYPE3-SFP-IQ28
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
8.5
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
9Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 9: Gigabit Ethernet IQ2E PICs
“Gigabit Ethernet Enhanced
IQ2 (IQ2E) PICs with SFP
(T1600 Router)” on page 81
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
Enhanced IQ2 (IQ2E) PIC
with SFP
•
Type 2 Gigabit Ethernet
Enhanced IQ2 (IQ2E) PIC
with SFP
•
Type 3 Gigabit Ethernet
Enhanced IQ2 (IQ2E) PIC
with SFP
10-Gigabit Ethernet PICs
••
Optical: LCType 1 Gigabit Ethernet
•
Copper: RJ-45
•
Four-pair, Category 5
9.4PB-4GE-TYPE1-SFP-IQ2E4
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-8GE-TYPE2-SFP-IQ28
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
9.4
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
•
PB-8GE-TYPE3-SFP-IQ28
Optical: LC
•
Copper: RJ-45
•
Four-pair, Category 5
9.4
shielded twisted-pair
connectivity
•
Pinout: MDI crossover
Table 10 on page 10 lists the 10-Gigabit Ethernet PICs supported by T1600 router.
Table 10: 10-Gigabit Ethernet PICs Supported by the T1600 Router
•
Optical: LCPC-1XGE-TYPE3-XFP-IQ21“10-Gigabit Ethernet IQ2 PIC
with XFP (T1600 Router)” on
page 85
•
Optical: LCPC-1XGE-TYPE3-XFP-IQ2E1“10-Gigabit Ethernet
Enhanced IQ2 (IQ2E) PIC with
XFP (T1600 Router)” on
page 88
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
8.5
9.4
Copyright © 2013, Juniper Networks, Inc.10
Table 10: 10-Gigabit Ethernet PICs Supported by the T1600 Router (continued)
T1600 PICs Supported
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
•
XENPAKPC-1XGE-XENPAK1“10-Gigabit Ethernet PIC with
XENPAK (T1600 Router)” on
page 91
•
Optical: SCPC-1XGE-DWDM-CBAND1“10-Gigabit Ethernet DWDM
PIC (T1600 Router)” on
page 99
•
Optical: SCPC-1XGE-DWDM-OTN1“10-Gigabit Ethernet DWDM
OTN PIC (T1600 Router)” on
page 101
•
Optical: LCPD-5-10XGE-SFPP10“10-Gigabit Ethernet
LAN/WAN PIC with
Oversubscription and SFP+
(T1600 Router)” on page 93
•
Optical: LCPD-4XGE-XFP4“10-Gigabit Ethernet
LAN/WAN PIC with XFP
(T1600 Router)” on page 96
40-Gigabit Ethernet PICs
Table 11 on page 11 lists the 40-Gigabit Ethernet PICs supported by T1600 router.
Table 11: 40-Gigabit Ethernet PICs Supported by the T1600 Router
8.5
8.5
9.4
10.1
9.0
40-Gigabit Ethernet
CFP (T1600 Router)” on
page 103
100-Gigabit Ethernet PICs
Table 12 on page 11 lists the 100-Gigabit Ethernet PICs supported by T1600 router.
Table 12: 100-Gigabit Ethernet PICs Supported by the T1600 Router
•
Optical: SC. LC, or 24-fiber
MPO depending on the
transceiver. See the PIC
CFP (T1600 Router)” on
page 106
1“100-Gigabit Ethernet PIC with
FPC)
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
11.4Optical: SCPD-1XLE-CFP4“40-Gigabit Ethernet PIC with
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
10.3PD-1CE-CFP-FPC4 (PIC and
11Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 12: 100-Gigabit Ethernet PICs Supported by the T1600 Router (continued)
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
NOTE: This PIC is only available
packaged in an assembly with
the T1600-FPC4-ES FPC.
Services PICs
Table 13 on page 12 lists the Services PICs supported by T1600 router.
Table 13: Services PICs Supported by the T1600 Router
Services
“MultiServices PICs (T1600 Router)” on page 109
•
MultiServices 100 PIC
•
MultiServices400 PIC
•
MultiServices 500 PIC
“Tunnel Services PIC (T1600 Router)” on page 145
description for more
information.
•
NonePB-MS-100-10
•
NonePB-MS-400-20
•
NonePB-MS-500-30
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
8.5
8.5
8.5
•
Type 1 Tunnel Services PIC
•
Type 2 Tunnel Services PIC
•
Type 3 Tunnel Services PIC
PIC (T1600 Router)” on
page 146
SONET/SDH PICs
Table 14: SONET/SDH PICs Supported by the T1600 Router
Enhanced IQ (IQE) PIC with
SFP (T1600 Router)” on
page 113
•
NonePB-TUNNEL-10
•
NonePB-TUNNEL0
•
NonePC-TUNNEL0
•
NonePD-TUNNEL0“40-Gigabit Tunnel Services
•
Optical: LC
8.5
8.5
8.5
8.5
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
9.3R2PB-4OC3-STM1-IQE-SFP4“SONET/SDH OC3/STM1
Copyright © 2013, Juniper Networks, Inc.12
Table 14: SONET/SDH PICs Supported by the T1600 Router (continued)
“SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (T1600 Router)” on page 117
T1600 PICs Supported
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
•
Type 1 SONET/SDH
•
Optical: LCPB-4OC3-1OC12-SON-SFP4
OC3/STM1 (Multi–Rate)
PIC with SFP
•
Type 2 SONET/SDH
•
Optical: LCPB-4OC3-1OC12-SON2-SFP4
OC3/STM1 (Multi–Rate)
PIC with SFP
•
Optical: LCPB-1OC12-STM4-IQE-SFP1“SONET/SDH OC12/STM4
Enhanced IQ (IQE) PIC with
SFP (T1600 Router)” on
page 120
“SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (T1600 Router)” on page 123
•
SONET/SDH OC12/STM4
•
Optical: LCPB-1OC12-SON-SFP1
(Multi–Rate) PIC with SFP
•
SONET/SDH OC12/STM4
•
Optical: LCPB-4OC3-40C12-SON-SFP4
(Multi–Rate) PIC with SFP
•
Optical: LCPC-4OC48-SON-SFP4“SONET/SDH OC48c/STM16
PIC with SFP (T1600 Router)”
on page 126
•
Optical: LCPC-4OC48-STM16-IQE-SFP4“SONET/SDH OC48/STM16
Enhanced IQ (IQE) PIC with
SFP (T1600 Router)” on
page 129
8.5
8.5
9.3
8.5
8.5
8.5
10.4R2
(Multi-Rate) PIC with SFP
(T1600 Router)” on page 133
PIC (T1600 Router)” on
page 136
PICs with XFP (T1600
Router)” on page 139
PICs with XFP (T1600
Router)” on page 139
•
Optical: LCPB-1OC48-SON-B-SFP1“SONET/SDH OC48/STM16
•
Optical: LCPC-1OC192-SON-VSR1“SONET/SDHOC192c/STM64
•
Optical: LCPC-1OC192-SON-XFP1“SONET/SDH OC192/STM64
•
Optical: LCPD-4OC192-SON-XFP4“SONET/SDH OC192/STM64
8.5
8.5
8.5
8.5
13Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 14: SONET/SDH PICs Supported by the T1600 Router (continued)
First Junos OS
Release
SupportConnectorsModel NumberPortsPIC Family and Type
OC768c/STM256PIC (T1600
Router)” on page 142
Related
Documentation
•
Optical: SCPD-1OC768-SON-SR1“SONET/SDH
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 FPCs Supported on page 15
8.5
Copyright © 2013, Juniper Networks, Inc.14
T1600 FPCs Supported
Table 15 on page 15 lists the FPCs for the T1600 Core Routers. You can install any
combination of the FPCs currently supported. First Junos OS ReleaseSupportedindicates
the first release that the FPC is supported in the T1600 router.
NOTE: End of life (EOL) indicates that the product has been removed from
the price list and is no longer available for purchase. End of support (EOS)
indicates that no new support contracts are available on these products and
the last contract will expire on the EOS date associated with each product.
For more information about EOS or EOL products, see the product support
notification (PSN) hardware end-of-life announcements.
http://www.juniper.net/techpubs/hardware/eol.html
Table 15: FPCs Supported by the T1600 Router
T1600 FPCs Supported
Maximum
FPC Model
NumberFPC NameFPC Type
1
EOL details:
PSN-2007-12-035
EOL details:
PSN-2010-08-920
FPC1
Maximum
Number of PICs
Throughput per
FPC
4 Gbps4T640-FPC1-EEnhanced FPC1
4 Gbps4T640-FPC1-E2Enhanced II FPC1
4 Gbps4T640-FPC1-ESEnhanced Scaling
First Junos OS
Release
Supported
Standalone: 8.5
Routing matrix:
10.0
Standalone: 8.5
Routing matrix:
10.0
Standalone: 9.4
Routing matrix:
10.0
15Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 15: FPCs Supported by the T1600 Router (continued)
Maximum
FPC Model
NumberFPC NameFPC Type
2
EOS details:
PSN-2004-05-010
EOL details:
PSN-2007-12-035
EOL details:
PSN-2010-08-920
FPC2
3
EOS details:
PSN-2004-05-010
Maximum
Number of PICs
Throughput per
FPC
16 Gbps4T640-FPC2FPC2
16 Gbps4T640-FPC2-EEnhanced FPC2
16 Gbps4T640-FPC2-E2Enhanced II FPC2
16 Gbps4T640-FPC2-ESEnhanced Scaling
First Junos OS
Release
Supported
Standalone: 8.5
Routing matrix:
10.0
Standalone: 8.5
Routing matrix:
10.0
Standalone: 8.5
Routing matrix:
10.0
Standalone: 9.5
Routing matrix:
10.0
8.540 Gbps4T640-FPC3FPC3
8.540 Gbps4T640-FPC3-EEnhanced FPC3
EOL details:
PSN-2007-12-035
8.540 Gbps4T640-FPC3-E2Enhanced II FPC3
EOL details:
PSN-2010-08-920
9.040 Gbps4T640-FPC3-ESEnhanced Scaling
FPC3
4
Scaling FPC4
EOL details:
PSN-2010-07-878
50 Gbps1T640-FPC4-1P-ESEnhanced Scaling
FPC4-1P
Scaling FPC4
8.550 Gbps1T640-FPC4-EST640 Enhanced
Standalone: 9.5
Routing matrix:
10.0
8.5100 Gbps2T1600-FPC4-EST1600 Enhanced
Copyright © 2013, Juniper Networks, Inc.16
T1600 FPCs Supported
Related
Documentation
T1600 PIC/FPC Compatibility on page 18•
• T1600 PIC Combination Limitations on page 18
17Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
T1600 PIC Combination Limitations
In most cases, you can install PICs of different media types on the same FPC as long as
the FPC and the router support those PICs. However, configuration rules might limit
certain combinations of PICs on some platforms.
Newer Junos OS services for some PICs can require significant Internet Processor ASIC
memory.Ethernet and SONET PICs typically do not use large amounts of memory. Gigabit
Ethernet, ATM2, IQ serial PICs, and Multiservices PICs use more. To conserve memory,
you can group PICs in the same family together on the same FPC.
If you have different PIC families on a single FPC, review the configuration rules to plan
which PICs to install on the FPCs for your router. Consult technical bulletin
PSN-2007-01-023 for information about configuration rules for PIC combinations on the
Juniper Networks Support site at https://www.juniper.net/alerts/.
When you upgrade to Junos OS Release7.5 or later, a warning appears if any configuration
rules affect your PIC combinations. If you continue the installation, one or more PICs
might appear to be online (the LEDs are on), but the Junos OS cannot enable them and
they cannot pass traffic. As a workaround, you can:
•
Install a Junos OS release that supports the combination.
•
Install PICs on a different FPC.
•
Remove PICs from the affected FPC.
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PICs Supported on page 5
• T1600 FPCs Supported on page 15
• T1600 PIC/FPC Compatibility on page 18
T1600 PIC/FPC Compatibility
The PIC/FPC compatibility matrixes list the current PICs for the T1600 router. For example,
Junos OS Release 8.5 is the first release in which the T640-FPC1-E2 supports the ATM2
OC3/STM1 IQ, 2-port PIC.
NOTE: A – indicates that the FPC does not support the PIC.
•
PIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs) on page 19
•
PIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs) on page 20
•
PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs) on page 22
•
PIC/FPC Compatibility (Type 4 FPCs and Type 4 PICs) on page 23
Copyright © 2013, Juniper Networks, Inc.18
PIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs)
Table 16 on page 19 provides a PIC/FPC compatibility matrix for the current Type 1 PICs
for the T1600 router and Type 1 FPCs.
NOTE: A T1600 router in a routing matrix supports Type 1 PICs in Junos OS
Release 10.0 and later.
Table 16: T1600 PIC/FPC Compatibility Type 1
ATM2 IQ PICs
T1600 PIC/FPC Compatibility
T640-FPC1-EST640-FPC1-E2T640-FPC1-EPIC Model NumberType 1 PIC
–8.58.5PB-4E3-ATM2ATM2 E3 IQ, 4-port
ATM2 OC3/STM1 IQ, 2-port
ATM2 OC12/ STM4 IQ,
1-port
Channelized IQ PICs
Channelized IQE PICs
DS3 and E3 PICs
–8.58.5PB-2OC3-ATM2-MM
PB-2OC3-ATM2-SMIR
–8.58.5PB-1OC12-ATM2-MM
PB-1OC12-ATM2-SMIR
9.48.58.5PB-4CHDS3-QPPChDS3 IQ, 4-port
9.48.58.5PB-1CHOC3-SMIR-QPPChOC3 IQ, 1-port
9.48.58.5PB-1CHSTM1-SMIR-QPPChSTM1 IQ, 1-port
9.49.39.3PB-4CHDS3-E3-IQE-BNCChDS3/E3 IQE, 4-port
9.59.59.5PB-1OCHE1-T1-IQE-RJ48ChE1/T1 IQE, 10-port
9.49.39.3PB-2CHOC3-STM1-IQE-SFPChOC3/STM1 IQE, 2-port
9.49.39.3PB-1CHOC12-STM4-IQE-SFPChOC12/STM4 IQE, 1-port
9.49.3R29.3R2PB-4DS3-E3-IQE-BNCDS3/E3 IQE, 4-port
Fast Ethernet and Gigabit Ethernet PICs
–8.58.5PB-4E3-QPPE3 IQ, 4-port
9.48.58.5PB-4FE-TXFast Ethernet, 4-port
19Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 16: T1600 PIC/FPC Compatibility Type 1 (continued)
Gigabit Ethernet IQ PICs
SFP
Gigabit Ethernet IQ2 PICs
SFP
Gigabit Ethernet IQ2E PICs
4-port SFP
Services PICs
T640-FPC1-EST640-FPC1-E2T640-FPC1-EPIC Model NumberType 1 PIC
9.48.58.5PB-1GE-SFPGigabit Ethernet, 1-port SFP
–8.58.5PB-1GE-SFP-QPPGigabit Ethernet IQ, 1-port
9.48.58.5PB-4GE-TYPE1-SFP-IQ2Gigabit Ethernet IQ2, 4-port
–9.49.4PB-4GE-TYPE1-SFP-IQ2EGigabit Ethernet IQ2E,
9.48.58.5PB-MS-100-1MultiServices 100
SONET/SDH PICs
4-port (Type 1)
1-port (Type 1)
PIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs)
Table 17 on page 20 provides a PIC/FPC compatibility matrix for the current Type 2 PICs
for the T1600 router and Type 2 FPCs.
NOTE: A T1600 router in a routing matrix supports Type 2 PICs in Junos OS
Release 10.0 and later.
Table 17: T1600 PIC/FPC Compatibility Type 2
9.48.58.5PB-TUNNEL1Tunnel Services
–9.3R29.3R2PB-4OC3-STM1-IQE-SFPOC3/STM1 IQE, 4-port SFP
9.48.58.5PB-4OC3-1OC12-SON-SFPOC3c/STM1 (Multi-Rate)
–9.39.3PB-1OC12-STM4-IQE-SFPOC12/STM4 IQE, 1-port SFP
9.48.58.5PB-1OC12-SON-SFPOC12c/STM4 (Multi-Rate)
ATM2 IQ PICs
T640-FPC2-EST640-FPC2-E2T640-FPC2-ET640-FPC2PIC Model NumberPIC
Copyright © 2013, Juniper Networks, Inc.20
Table 17: T1600 PIC/FPC Compatibility Type 2 (continued)
T1600 PIC/FPC Compatibility
T640-FPC2-EST640-FPC2-E2T640-FPC2-ET640-FPC2PIC Model NumberPIC
ATM2 OC12/ STM4 IQ,
1-port
1-port SFP
Channelized IQE PICs
Gigabit Ethernet PICs
Gigabit Ethernet IQ PICs
SFP
Gigabit Ethernet IQ2 PICs
SFP (Type 2)
–8.58.58.5PB-1OC12-ATM2-MM
PB-1OC12-ATM2-SMIR
–8.58.58.5PB-1OC48-ATM2-SFPATM2 OC48/ STM16 IQ,
9.59.49.4–PB-4CHOC12-STM4-IQE-SFPChOC12/STM4 IQE, 4-port
9.59.49.4–PB-1CHOC48-STM16-IQE-SFPChOC48/STM16 IQE, 1-port
9.58.58.58.5PB-2GE-SFPGigabit Ethernet, 2-port SFP
9.58.58.58.5PB-4GE-SFPGigabit Ethernet, 4-port SFP
–8.58.58.5PB-2GE-SFP-QPPGigabit Ethernet IQ, 2-port
9.58.58.5–PB-8GE-TYPE2-SFP-IQ2Gigabit Ethernet IQ2, 8-port
Gigabit Ethernet IQ2E PICs
8-port SFP (Type 2)
Services PICs
SONET/SDH PICs
4-port (Type 2)
4-port (Type 2)
4-port (Type 2)
–9.49.4–PB-8GE-TYPE2-SFP-IQ2EGigabit Ethernet IQ2E,
9.58.58.5–PB-MS-400-2MultiServices 400
9.58.58.58.5PB-TUNNELTunnel Services
–8.58.5–PB-4OC3-1OC12-SON2-SFPOC3c/STM1 (Multi-Rate)
9.58.58.5–PB-4OC3-4OC12-SON-SFPOC12c/STM4 (Multi-Rate)
–8.58.58.5PB-1OC48-SON-SFPOC48c/STM16, 1-port SFP
9.58.58.5–PB-1OC48-SON-B-SFPOC48/STM16 (Multi-Rate)
21Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs)
Table 18 on page 22 provides a PIC/FPC compatibility matrix for the current Type 3 PICs
for the T1600 router and Type 3 FPCs.
NOTE: A T1600 router in a routing matrix supports Type 3 PICs in Junos OS
Release 9.6R2 and later.
Table 18: T1600 PIC/FPC Compatibility Type 3
Channelized IQE PICs
IQE, 4-port
Gigabit Ethernet PICs
10-port SFP
T640-FPC3-EST640-FPC3-E2T640-FPC3-ET640-FPC3PIC Model NumberType 3 PIC
10.1–––PC-4CHOC12-STM4-IQE-SFPChOC12/STM4
9.08.58.58.5PC-10-GE-SFPGigabit Ethernet,
Gigabit Ethernet IQ2 PICs
IQ2, 8-port SFP
(Type 3)
Ethernet IQ2,
1-port XFP
Gigabit Ethernet and 10-Gigabit Ethernet IQ2E PICs
IQ2E, 8-port SFP
(Type 3)
Ethernet IQ2E,
1-port XFP
10-Gigabit Ethernet PICs
10-Gigabit
Ethernet, 1-port
XENPAK
10GBase-ER and
10GBASE-LR transceivers
installed
10GBASE-SR and
10GBASE-ZR transceivers
installed
9.08.58.58.5PC-8GE-TYPE3-SFP-IQ2Gigabit Ethernet
9.08.58.58.5PC-1XGE-TYPE3-XFP-IQ210-Gigabit
9.49.49.49.4PC-8GE-TYPE3-SFP-IQ2EGigabit Ethernet
9.49.49.49.4PC-1XGE-TYPE3-XFP-IQ2E10-Gigabit
9.08.58.58.5PC-1XGE-XENPAK with
9.08.58.58.5PC-1XGE-XENPAK with
Copyright © 2013, Juniper Networks, Inc.22
Table 18: T1600 PIC/FPC Compatibility Type 3 (continued)
Ethernet, 1-port
DWDM
Ethernet, 1-port
DWDM OTN
Services PICs
SONET/SDH PICs
OC48/STM16IQE,
4-port SFP
in a standalone T1600
router
T1600 PIC/FPC Compatibility
T640-FPC3-EST640-FPC3-E2T640-FPC3-ET640-FPC3PIC Model NumberType 3 PIC
9.08.58.58.5PC-1XGE-DWDM-CBAND10-Gigabit
9.49.49.49.4PC-1XGE-DWDM-OTN10-Gigabit
9.38.58.5–PC-MS-500-3MultiServices500
9.08.58.58.5PC-TUNNELTunnel Services
10.4R2–––PC-4OC48-STM16-IQE-SFP
This PIC is not supported in
a T1600 router connected
to a TX Matrix Plus router.
4-port SFP
1-port
1-port XFP
PIC/FPC Compatibility (Type 4 FPCs and Type 4 PICs)
Table 19 on page 23 provides a PIC/FPC compatibility matrix for the current Type 4 PICs
for the T1600 router and Type 4 FPCs.
NOTE: A T1600 router in a routing matrix supports Type 4 PICs in Junos OS
Release 9.6R2 and later.
Table 19: T1600 PIC/FPC Compatibility Type 4
9.08.58.58.5PC-4OC48-SON-SFPOC48c/STM16,
9.08.58.58.5PC-1OC192-SON-VSROC192c /STM64,
9.08.58.5–PC-1OC192-SON-XFPOC192 /STM64,
T640-FPC4-1P-EST1600-FPC4-EST640-FPC4-ESPIC Model NumberType 4 PIC
10-Gigabit Ethernet PICs
4-port LAN/WAN
XFP
9.59.09.0PD-4XGE-XFP10-Gigabit Ethernet,
23Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 19: T1600 PIC/FPC Compatibility Type 4 (continued)
T640-FPC4-1P-EST1600-FPC4-EST640-FPC4-ESPIC Model NumberType 4 PIC
LAN/WAN with
Oversubscription
and SFP+
40-Gigabit Ethernet PICs
100-Gigabit Ethernet PICs
CFP
NOTE: This PIC is only available
packaged in an assembly with the
T1600-FPC4-ES FPC.
Services PICs
Services
SONET/SDH PICs
4-port XFP
10.1PD-5-10XGE-SFPP10-Gigabit
NOTE: To support
PD-5-10XGE-SFPP,
the hardware
version of the
T1600-FPC4-ES
(part number
710-013037) REV 13
or later is required.
10.110.1
11.411.4–PD-1XLE-CFP40-Gigabit with CFP
10.3––PD-1CE-CFP-FPC4 (PIC and FPC)100-Gigabit with
9.58.58.5PD-TUNNEL40-Gigabit Tunnel
9.58.58.5PD-4OC192-SON-XFPOC192/STM64,
1-port
Documentation
Related
9.58.58.5PD-1OC768-SON-SROC768c/STM256,
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
• T1600 FPCs Supported on page 15
Copyright © 2013, Juniper Networks, Inc.24
ATM2 E3 IQ PIC (T1600 Router)
ATM2 E3 IQ PIC (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four E3 ports
•
Power requirement: 0.41 A @ 48 V (20 W)
•
Fine-grained queuing per logical interface
•
ATM standards compliant
•
Model number: PB-2E3-ATM2
•
16-MB SDRAM memory for ATM segmentation and reassembly (SAR)
•
ATM switch ID
•
Configurable framing options:
•
G.751 direct mapping
•
G.751 with PLCP encapsulation (default)
•
G.832 ATM direct mapping
•
Internal and loop timing
25Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping
•
Unspecified bit rate (UBR) traffic shaping
•
Fine-grained variable bit rate (VBR) traffic shaping
•
Circuit cross-connect (CCC)
•
ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn
the IP address of the router on the far end of an ATM permanent virtual circuit (PVC)
•
Simple Network Management Protocol (SNMP):
•
Management Information Base (MIB) 2 (RFC 1213)
•
ATM MIB (RFC 1695)
•
SONET MIB
•
AAL5 encapsulations:
•
ATM-VC-MUX
•
ATM-NLPID
•
ATM-Cisco-LLPID
•
ATM-SNAP
•
ATM-CCC-VC-MUX
•
Cables and connectors
10 ft (3.05 m) posilock SMB to BNC (provided)
•
Four pairs of Rx and Tx coaxial cables
LEDs
Alarms, errors, and
events
Related
Documentation
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm indication signal (AIS)
•
Frame error
•
Line code violation
•
Local and remote loopback
•
Loss of signal (LOS)
•
Out of frame (OOF)
•
Yellow alarm
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.26
ATM2 OC3/STM1 IQ PIC (T1600 Router)
•
Software release
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
ATM2 OC3/STM1 IQ PIC (T1600 Router)
Description
Hardware features
•
Two OC3 ports
•
Power requirement: 0.41 A @ 48 V (20 W)
•
Fine-grained queuing per logical interface
•
Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
•
ATM and SONET/SDH standards compliant
•
Alarm and event counting and detection
•
Compatible with well-known ATM switches
•
ATM switch ID, which displays the switch IP address and local interface name of the adjacent
Fore ATM switches
•
Model number: PB-2OC3-ATM2-MM
Model number: PB-2OC3-STM2-SMIR
•
Single 3010 SAR for segmentation and reassembly into 53 byte ATM cells
•
High-performance parsing of SONET/SDH frames
•
ASIC-basedpacket segmentation and reassembly(SAR)managementandoutput port queuing
•
64 MB SDRAM memory for ATM SAR
•
Packet buffering, Layer 2 parsing
27Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Circuit cross-connect (CCC) for leveraging ATM access networks
•
User-configurable virtual circuit (VC) and virtual path (VP) support
•
Support for idle cell or unassigned cell transmission
•
OAM fault management processes alarm indication signal (AIS), remote defect indication
(RDI) cells, and loop cells
•
Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP
•
Local and remote loopback
•
ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn
the IP address of the router on the far end of an ATM permanent virtual circuit (PVC)
•
Simple Network Management Protocol (SNMP):
•
Management Information Base (MIB) 2 (RFC 1213)
•
ATM MIB (RFC 1695)
•
SONET MIB
•
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)
traffic shaping
•
Per-VC or per-VP traffic shaping
•
Support for F4 OAM cells
•
Support for 16 bit VCI range
Cables and connectors
LEDs
•
Duplex SC/PC connector (RX and TX)
•
SONET/SDH OC3/STM1 fixed transceivers:
•
Multimode
•
Intermediate reach (IR-1)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
Copyright © 2013, Juniper Networks, Inc.28
Alarms, errors, and
events
ATM2 OC3/STM1 IQ PIC (T1600 Router)
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of cell delineation (LOC)
•
Loss of frame (LOF)
•
Loss of pointer (LOP-P)
•
Loss of signal (LOS)
•
Payload mismatch (PLM-P)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Error detection:
•
Bit interleaved parity errors B1, B2, B3
•
Errored seconds (ES-S, ES-L, ES-P)
•
Far-end bit errors, remote error indication—line (REI-L), far-end line coding violations (CV-LFE)
•
Far-end bit errors, remote error indication—path (REI-P), far-end path coding violations
(CV-PFE)
•
Far-end errored seconds (ES-LFE, ES-PFE)
•
Far-end severely errored seconds (SES-LFE, SES-PFE)
•
Far-end unavailable seconds (UAS-LFE, UAS-PFE)
•
Severely errored framing (SEF)
•
Severely errored framing seconds (SEFS-S)
•
Severely errored seconds (SES-S, SES-L, SES-P)
•
Unavailable seconds (UAS-L, UAS-P)
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
29Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
ATM2 OC12/STM4 IQ PICs (T1600 Router)
Figure 2: 2-Port ATM2 OC12/STM4 IQ PICFigure 1: 1-Port ATM2 OC12/STM4 IQ PIC
Software release
Description
Hardware features
•
1-port: Junos OS Release 8.5 and later (Type 1)
•
2-port: Junos OS Release 8.5 and later (Type 2)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
One or two OC12 ports
•
Power requirement: 0.52 A @ 48 V (25 W)
•
Fine-grained queuing per logical interface
•
Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
•
Complies with ATM and SONET/SDH standards
•
Alarm and event counting and detection
•
Compatible with well-known ATM switches
•
ATM switch ID, which displays the switch IP address and local interface name of the adjacent
Fore ATM switches
•
Model number for 1-Port ATM2 OC12/STM4 IQ PIC: PB-1OC12–ATM2-MM
Model number for 1-Port ATM2 OC12/STM4 IQ PIC: PB-1OC12-ATM2-SMIR
•
Model number for 2-Port ATM2 OC12/STM4 IQ PIC: PB-2OC12-ATM2-MM
Model number for 2-Port ATM2 OC12/STM4 IQ PIC: PB-2OC12-ATM2-SMIR
•
ATM2 IQ 1-port OC12 PICs have one 3010 SAR for segmentation and reassembly into 53-byte
ATM cells; ATM2 IQ 2-port OC12 PICs have dual 3010 SAR
•
High-performance parsing of SONET/SDH frames
•
ASIC-basedpacket segmentation and reassembly(SAR)managementandoutput port queuing
•
64 MB SDRAM memory for ATM SAR
•
Packet buffering, Layer 2 parsing
Copyright © 2013, Juniper Networks, Inc.30
Software features
ATM2 OC12/STM4 IQ PICs (T1600 Router)
•
Circuit cross-connect for leveraging ATM access networks
•
User-configurable virtual circuit (VC) and virtual path (VP) support
•
Support for idle cell or unassigned cell transmission
•
OAM fault management processes alarm indication signal (AIS), remote defect indication
(RDI), and loop cells
•
Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP
•
Local and remote loopback
•
ATM Inverse ARP, which enables routers to automatically learn the IP address of the router on
the far end of an ATM PVC
•
Simple Network Management Protocol (SNMP):
•
Management Information Base (MIB) 2 (RFC 1213)
•
ATM MIB (RFC 1695)
•
SONET MIB
•
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)
traffic shaping
•
Per-VC or per-VP traffic shaping
•
Support for F4 OAM cells
•
Support for 16-bit VCI range
Cables and connectors
LEDs
•
Duplex SC/PC connector (Rx and Tx)
•
SONET/SDH OC12/STM4 fixed transceivers:
•
Multimode
•
Intermediate reach (IR-1)
Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
31Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Alarms, errors, and
events
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of cell delineation (LOC)
•
Loss of frame (LOF)
•
Loss of pointer (LOP-P)
•
Loss of signal (LOS)
•
Payload mismatch (PLM-P)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Error detection:
•
Bit interleaved parity errors B1, B2, B3
•
Errored seconds (ES-S, ES-L, ES-P)
•
Far-end bit errors, remote error indication—line (REI-L), far-end line coding violations (CV-LFE)
•
Far-end bit errors, remote error indication—path (REI-P), far-end path coding violations
(CV-PFE)
•
Far-end errored seconds (ES-LFE, ES-PFE)
•
Far-end severely errored seconds (SES-LFE, SES-PFE)
•
Far-end unavailable seconds (UAS-LFE, UAS-PFE)
•
Severely errored framing (SEF)
•
Severely errored framing seconds (SEFS-S)
•
Severely errored seconds (SES-S, SES-L, SES-P)
•
Unavailable seconds (UAS-L, UAS-P)
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.32
ATM2 OC48/STM16 IQ PIC with SFP (T1600 Router)
ATM2 OC48/STM16 IQ PIC with SFP (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 2)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One OC48 port
•
Power requirements: 0.41 A @ 48 V (20 W)
•
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
•
Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
•
ATM and SONET/SDH standards compliant
•
Alarm and event counting and detection
•
Compatible with well-known ATM switches
•
ATM switch ID, which displays the switch IP address and local interface name of the adjacent
Fore ATM switches
•
Model number: PB-1OC48-ATM2-SFP
•
ATM2 IQ 1-port OC48 PICs have one 3010 SAR for segmentation and reassembly into 53-byte
ATM cells.
•
High-performance parsing of SONET/SDH frames
•
ASIC-basedpacket segmentation and reassembly(SAR)managementandoutput port queuing
•
64-MB SDRAM memory for ATM SAR
•
Packet buffering, Layer 2 parsing
33Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
MultiprotocolLabel Switching(MPLS)circuitcross-connectfor leveraging ATM access networks
•
User-configurable virtual circuit (VC) and virtual path (VP) support
•
Support for idle cell or unassigned cell transmission
•
OAM Fault Management processes Alarm Indication Signal (AIS), Remote Defect Indicator
(RDI), and loop cells
•
Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP
•
Local and remote loopback
•
ATM Inverse ARP, which enables routers to automatically learn the IP address of the router on
the far end of an ATM PVC
•
Simple Network Management Protocol (SNMP):
•
Management Information Base (MIB) 2 (RFC 1213)
•
ATM MIB (RFC 1695)
•
SONET MIB
•
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)
traffic shaping
•
Per-VC or per-VP traffic shaping
•
Support for F4 OAM cells
•
Support for 16-bit VCI range
Cables and connectors
LEDs
•
You can install different transceivers on the PIC.
•
Duplex LC/PC connector (RX and TX)
•
SONET/SDH OC48/STM16 fiber-optic SFP transceivers:
•
Multimode (model number: SFP-OC48-SR)
•
Intermediate reach (IR-1) (model number: SFP-OC48-IR)
Optical interfacespecifications—see SONET/SDHOC48/STM16OpticalInterface Specifications
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
Copyright © 2013, Juniper Networks, Inc.34
Alarms, errors, and
events
ATM2 OC48/STM16 IQ PIC with SFP (T1600 Router)
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of cell delineation (LOC)
•
Loss of frame (LOF)
•
Loss of pointer (LOP-P)
•
Loss of signal (LOS)
•
Payload mismatch (PLM-P)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Error detection:
•
Bit interleaved parity errors B1, B2, B3
•
Errored seconds (ES-S, ES-L, ES-P)
•
Far-end bit errors, remote error indication—line (REI-L), far-end line coding violations (CV-LFE)
•
Far-end bit errors, remote error indication—path (REI-P), far-end path coding violations
(CV-PFE)
•
Far-end errored seconds (ES-LFE, ES-PFE)
•
Far-end severely errored seconds (SES-LFE, SES-PFE)
•
Far-end unavailable seconds (UAS-LFE, UAS-PFE)
•
Severely errored framing (SEF)
•
Severely errored framing seconds (SEFS-S)
•
Severely errored seconds (SES-S, SES-L, SES-P)
•
Unavailable seconds (UAS-L, UAS-P)
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
35Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Channelized DS3 IQ PIC (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four DS3 ports
•
Power requirement: 0.32 A @ 48 V (15.6 W)
•
Fine-grained queuing per logical interface
•
Channelization: DS3, DS0
•
Model number: PB-4CHDS3-QPP
•
Data service unit (DSU) functionality
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink
•
B3ZS line encoding
•
M13 or C-bit parity
•
Full bit error rate test (BERT)
•
Local and remote loopback testing
Copyright © 2013, Juniper Networks, Inc.36
Software features
Channelized DS3 IQ PIC (T1600 Router)
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB
•
Dynamic, arbitrary channel configuration
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Frame Relay
•
High-Level Data Link Control (HDLC)
•
Point-to-Point Protocol (PPP)
•
Standard DS3 BNC coaxial cable interfacesCables and connectors
LEDs
Alarms, errors, and
events
(counters)
Related
Documentation
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm indication signal (AIS)
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Frame error
•
Idle code, Idle received
•
Line code violation (LCV)
•
Loss of signal (LOS)
•
Out of frame (OOF)
•
Parity bit (P-bit) disagreements
•
Path parity error
•
Yellow alarm bit (X-bit) disagreements
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
37Copyright © 2013, Juniper Networks, Inc.
g002620
T1600 Core Router Interface Module Reference
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
Software release
Description
•
Junos OS Release 9.3 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four E3 or Channelized DS3 ports
•
E3 or Channelized DS3 is configurable on a per-port granularity
•
DS3 channelization:
•
4 DS3 channels
•
112 DS1 channels
•
1011 DS0 channels
•
Power requirement: 0.53 A @ 48 V (25.4 W)
•
Model number: PB-4CHDS3-E3-IQE-BNC
•
Ports are numbered 0 through 3 top to bottomHardware features
Copyright © 2013, Juniper Networks, Inc.38
Software features
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
•
Maximum transmission units (MTUs) of up to 9000 bytes
•
Dynamic, arbitrary channel configuration
•
Subrate and scrambling:
NOTE: Only DS3 interfaces supports subrate and scrambling.
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink (subrate: only port A mode)
NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQ
interface.
•
Data service unit (DSU) functionality
•
B3ZS line encoding
•
Framing: M13, C-bit parity, framed clear channel
•
Full bit error rate test (BERT) for DS0, DS1, and DS3
•
ANSI T1.403 FDL
•
Internal and loop clocking for DS3 and DS1
•
DS3 far end alarm and control (FEAC) channel
•
Local line, remote line, and remote playback loopback testing for each DS3 and DS1 channels
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
•
Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Standard DS3 BNC coaxial cable interfacesCables and connectors
39Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm reporting for error statistics and failure counts
•
DS1 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Remote alarm indication signal (RAIS)
•
DS1 error detection:
•
Bursty errored seconds (BES)
•
CRC errors
•
Errored seconds (ES)
•
Line errored seconds (LES)
•
Loss of framing seconds (LOFS)
•
Loss of signal seconds (LOSS)
•
Severely errored seconds (SES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
DS3 alarms:
(counters)
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Phase lock loop (PLL)
•
DS3 error detection:
•
C-bit code violations (CCV)
•
C-bit errored seconds (CES)
•
C-bit severely errored framing seconds (CEFS)
•
CRC errors
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Far-end receive failure (FERF)
•
Line errored seconds (LES)
•
Parity bit (P-bit) code violations (PCV)
•
Parity bit (P-bit) errored seconds (PES)
•
Parity bit (P-bit) severely errored framing seconds (PSES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
Copyright © 2013, Juniper Networks, Inc.40
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
41Copyright © 2013, Juniper Networks, Inc.
g004432
T1600 Core Router Interface Module Reference
Channelized E1/T1 Enhanced IQ (IQE) PIC (T1600 Router)
Software release
Description
Hardware features
Software features
•
Junos OS Release 9.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Ten E1 or T1 ports
•
DS1 and E1 interfaces are selectable on a per-port granularity
•
E1 channelization per PIC:
•
10 E1 channels
•
310 DS0 channels
•
T1 channelization per PIC:
•
10 T1 channels
•
240 DS0 channels
•
Power requirement: 0.52 A @ 48 V (24.73 W)
•
Model number: PB-10CHE1-T1-IQE-RJ48
Ports are numbered:
•
Top row: 0 and 1 from left to right
•
Second row: 2 and 3 from left to right
•
Third row: 3 and 4 from left to right
•
Bottom row: 5 and 6 from left to right
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
•
Support sending and receiving in-band loopback codes in both framed and unframed mode:
•
Framed in-band loopback at CSU
•
Framed in-band loopback at Smartjack (ANSI)
Copyright © 2013, Juniper Networks, Inc.42
Channelized E1/T1 Enhanced IQ (IQE) PIC (T1600 Router)
•
Unframed in-band loopback at CSU
•
Unframed in-band loopback at Smartjack (ANSI)
•
You can configure the following framing modes using the CLI:
•
T1—SF (D4/superframe), ESF (extended superframe)
•
E1—G704, G704–no-crc4, unframed
•
Packet buffering, Layer 2 parsing
•
Local line, remote line, and remote payload loopback testing; each channel can be looped
individually and independently of other channels (DS1/E1 channels)
•
Simple Network Management Protocol (SNMP): T1 MIB (RFC 1406)
•
Dynamic, arbitrary channel configuration
•
Full bit error rate test (BERT)
•
Clocking: internal and loop (clock recovered from network and use for transmit). Internal timing
is the default for channelized T1 ports. The external master clock can be a multiple of 2.048
MHz or 1.544 MHz for E1 or T1 operation.
•
Line coding:
•
T1—CLI configurable as AMI or B8ZS
•
E1—HDB3
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Encapsulations available only for DS0 and DS1:
•
Multilink Frame Relay end-to-end (MLFR FRF.15)
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Multilink PPP (MLPPP)
•
Encapsulations available only for DS1:
•
PPP over Frame Relay
•
120-ohm RJ-48C connector (female)Cables and connectors
43Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
DS1 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Remote alarm indication signal (RAIS)
•
24-hour alarm reporting history maintained for error statistics and failure counts, 15-minute
intervals on all errors
•
DS1 error detection:
•
Bursty errored seconds (BES)
•
CRC errors
•
Errored seconds (ES)
•
Line errored seconds (LES)
•
Loss of framing seconds (LOFS)
•
Loss of signal seconds (LOSS)
•
Severely errored seconds (SES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
Instrumentation
(counters)
Related
Documentation
•
Layer 2 per-queue and per-channel packet and byte counters
•
Layer 2 per-queue and per-channel packet and byte drop counters
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.44
Channelized OC3 IQ PIC (T1600 Router)
Channelized OC3 IQ PIC (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One OC3 port
•
Power requirement: 0.39 A @ 48 V (18.6 W)
•
Fine-grained queuing per logical interface
•
Channelization: DS3, DS1, DS0
•
Model number: PB-1CHOC3-SMIR-QPP
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink
•
Packet buffering, Layer 2 parsing
•
M13/C-bit parity encoding
•
DS3 far-end alarm and control (FEAC) channel support
•
Local and remote loopback testing
45Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
•
Dynamic, arbitrary channel configuration
•
Full bit error rate test (BERT)
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Frame Relay
•
High-Level Data Link Control (HDLC)
•
Point-to-Point Protocol (PPP)
•
Cables and connectors
Duplex SC/PC connector (Rx and Tx)
•
Single-mode fiber SONET/SDH OC3/STM1 intermediate-reach (IR-1) fiber
•
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm indication signal (AIS-L, AIS-P)
•
Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF)
•
Bit interleaved parity errors B1, B2, B3
•
Errored seconds (ES-S, ES-L, ES-P), far-end bit errors REI-L, REI-P (CV-LFE, CV-PFE), Far-end
block error (FEBE), far-end errored seconds (ES-LFE, ES-PFE), far-end severely errored seconds
(SES-LFE, SES-PFE), far-end unavailable seconds (UAS-LFE, UAS-PFE)
•
Frame error
•
Idle code, Idle received
•
Loss of frame (LOF), loss of pointer (LOP-P), loss of signal (LOS)
•
Out of frame (OOF)
•
Payload mismatch (PLM-P), payload unequipped (UNEQ-P)
•
Parity bit (P-bit) disagreements
•
Path parity error
•
Remote defect indication (RDI-L, RDI-P)
•
Severely errored framing (SEF), severely errored framing seconds (SEFS-S), severely errored
seconds (SES-S, SES-L, SES-P), unavailable seconds (UAS-L, UAS-P)
•
Yellow alarm bit (X-bit) disagreements
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.46
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
Software release
Description
Software features
•
Junos OS Release 9.3 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Two OC3 or STM1 ports
•
SONET or SDH is configurable on a per-port granularity
•
SONET channelization:
•
2 OC3 channels
•
6 DS3 channels
•
168 DS1 channels
•
1011 DS0 channels
•
SDH channelization:
•
2 STM1 channels (non-concatenated)
•
6 E3 channels
•
126 E1 channels
•
6 DS3 channels (Junos OS Release 10.1 and later)
•
168 DS1 channels (Junos OS Release 10.1 and later)
•
1011 DS0 channels
•
Power requirement: 0.56 A @ 48 V (27.1 W)
•
Model number: PB-2CHOC3-STM1-IQE-SFP
•
Ports are numbered 0 and 1 from left to rightHardware features
•
Dynamic, arbitrary channel configuration
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
47Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink
•
Packet buffering, Layer 2 parsing
•
M13/C-bit parity encoding
•
DS3 far-end alarm and control (FEAC) channel support
•
Local line, remote line, and remote payload loopback testing
•
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
•
Full bit error rate test (BERT)
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Encapsulations available only for DS1:
Cables and connectors
•
Multilink Frame Relay end-to-end (MLFR FRF.15)
•
Multilink PPP (MLPPP)
•
PPP over Frame Relay
•
Duplex LC/PC connector (Rx and Tx)
•
SONET/SDH OC3/STM1 fiber-optic SFPs:
•
Multimode (model number: SFP-OC3-SR)
•
Intermediate reach (IR-1) (model number: SFP-OC3-IR)
•
Long reach (IR-1) (model number: SFP-OC3-LR)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
Copyright © 2013, Juniper Networks, Inc.48
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
LEDs
Alarms, errors, and
events
One tricolor Status LED per port:
•
Off—Not enabled.
•
Green—Online with no alarms or failures.
•
Yellow—Online with alarms for remote failures.
•
Red—Active with a local alarm; router has detected a failure.
•
SONET alarms:
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of clock (LOC)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of pointer (LOP)
•
Loss of signal (LOS)
•
Payload label mismatch (PLM-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Remote error indication (REI)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Virtual container—alarm indication signal (VAIS)
•
Virtual container—loss of clock (VLOC)
•
Virtual container—loss of pointer (VLOP)
•
Virtual container—mismatch (VMIS)
•
Virtual container—remote defect indication (VRD1)
•
Virtual container—unequipped (VUNEQ)
•
SDH alarms:
•
Administrative unit alarm indication signal (AU-AIS)
•
Bit error rate signal degrade (BERR-SD)
•
Bit error rate signal fail (BERR-SF)
•
Bit interleaved parity (BIP) error B1, B2, B3
•
Higher order path—alarm indication signal (HP-AIS)
•
Higher order path—far-end receive failure (HP-FERF)
•
Higher order path—payload label mismatch (HP-PLM)
•
Higher order path—loss of pointer (HP-LOP)
•
Higher order path—remote defect indication (HP-RDI)
•
Higher order path—unequipped (HP-UNEQ)
•
Loss of clock (LOC)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of signal (LOS)
•
Multiplex section—alarm indication signal (MS-AIS)
•
Multiplex section—far-end receive failure (MS-FERF)
•
Multiplex section—remote defect indication (MS-RDI)
•
Multiplex section—remote error indication (MS-REI)
49Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Phase lock loop (PLL)
•
Remote error indication (REI)
•
Severely errored frame (SEF)
•
Tributary unit—alarm indication signal (TU-AIS)
•
Tributary unit—loss of clock (TU-LOC)
•
Tributary unit—loss of pointer (TU-LOP)
•
Tributary unit—mismatch (TU-MIS)
•
Tributary unit—remote defect indication (TU-RD1)
•
Tributary unit—unequipped (TU-UNEQ)
•
DS1 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Remote alarm indication signal (RAIS)
•
DS1 error detection:
•
Bursty errored seconds (BES)
•
CRC errors
•
Errored seconds (ES)
•
Line errored seconds (LES)
•
Loss of framing seconds (LOFS)
•
Loss of signal seconds (LOSS)
•
Severely errored seconds (SES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
DS3 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Phase lock loop (PLL)
•
DS3 error detection:
•
C-bit code violations (CCV)
•
C-bit errored seconds (CES)
•
C-bit severely errored framing seconds (CEFS)
•
CRC errors
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Far-end receive failure (FERF)
•
Line errored seconds (LES)
•
Parity bit (P-bit) code violations (PCV)
•
Parity bit (P-bit) errored seconds (PES)
•
Parity bit (P-bit) severely errored framing seconds (PSES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
Copyright © 2013, Juniper Networks, Inc.50
Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
51Copyright © 2013, Juniper Networks, Inc.
g004426
g002706
T1600 Core Router Interface Module Reference
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router)
Figure 3: 1-Port IQE PIC
Figure 5: 4-Port IQE PIC (Type 3)
Figure 4: 4-Port IQE PIC (Type 2)
Software release
Description
•
1-port: Junos OS Release 9.3 and later (Type 1)
•
4-port: Junos OS Release 9.4 and later (Type 2)
•
4-port: Junos OS Release 10.1 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
One or four OC12/STM4 ports
•
SONET or SDH is configurable on a per-port granularity
Copyright © 2013, Juniper Networks, Inc.52
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router)
•
SONET channelization (1-port PIC):
•
1 OC12 channel
•
4 OC3 channels
•
12 DS3 channels
•
336 DS1 channels
•
1011 DS0 channels
•
SDH channelization (1-port PIC):
•
1 STM4 channel
•
4 STM1 channels
•
12 E3 channels
•
252 E1 channels
•
12 DS3 channels (Junos OS Release 10.1 and later)
•
336 DS1 channels (Junos OS Release 10.1 and later)
•
1011 DS0 channels
•
SONET channelization (4-port PIC):
•
4 OC12 channel
•
16 OC3 channels
•
48 DS3 channels
•
672 DS1 channels
•
974 DS0 channels
•
SDH channelization (4-port PIC):
•
4 STM4 channel
•
16 STM1 channels
•
48 E3 channels
•
504 E1 channels
•
48 DS3 channels (Junos OS Release 10.1 and later)
•
672 DS1 channels (Junos OS Release 10.1 and later)
•
974 DS0 channels
•
Power requirement:
•
1-port: 0.64 A @ –48 V (30.7 W)
•
4-port: 1.08 A @ –48V (52 W)
•
Model number for 1-Port IQE PIC: PB-1CHOC12-STM4-IQE-SFP
Model number for 4-Port IQE PIC: PB-4CHOC12-STM4-IQE-SFP
Hardware features
Software features
•
1-port: Port is numbered 0.
•
4-port: Ports are numbered:
•
Top row: 2 and 0 from left to right
•
Bottom row: 3 and 1 from left to right
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
53Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
ADTRAN
•
Verilink
•
Packet buffering, Layer 2 parsing
•
M13/C-bit parity encoding
•
DS3 far-end alarm and control (FEAC) channel support
•
Local line, remote line, and remote payload loopback testing
•
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
•
Dynamic, arbitrary channel configuration
•
Full bit error rate test (BERT)
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Encapsulations available only for DS1:
Cables and connectors
•
Multilink Frame Relay end-to-end (MLFR FRF.15)
•
Multilink PPP (MLPPP)
•
PPP over Frame Relay
•
Duplex LC/PC connector (Rx and Tx); single-mode fiber
•
SONET/SDH OC12/STM4 fiber-optic SFP transceivers:
•
Short reach (model number: SFP-OC12-SR)
•
Intermediate reach (IR-1) (model number: SFP-OC312-IR)
•
Long reach (LR-1) (model number: SFP-OC12-LR)
Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications
Copyright © 2013, Juniper Networks, Inc.54
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router)
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
SONET alarms:
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of pointer (LOP)
•
Loss of signal (LOS)
•
Payload label mismatch (PLM-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Remote error indication (REI)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Virtual container—alarm indication signal (VAIS)
•
Virtual container—loss of pointer (VLOP)
•
Virtual container—mismatch (VMIS)
•
Virtual container—remote defect indication (VRD1)
•
Virtual container—unequipped (VUNEQ)
•
SDH alarms:
•
Administrative unit alarm indication signal (AU-AIS)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Bit interleaved parity (BIP) error B1, B2, B3
•
Higher order path—alarm indication signal (HP-AIS)
•
Higher order path—far-end receive failure (HP-FERF)
•
Higher order path—payload label mismatch (HP-PLM)
•
Higher order path—loss of pointer (HP-LOP)
•
Higher order path—remote defect indication (HP-RDI)
•
Higher order path—unequipped (HP-UNEQ)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of signal (LOS)
•
Multiplex section—alarm indication signal (MS-AIS)
•
Multiplex section—far-end receive failure (MS-FERF)
•
Multiplex section—remote defect indication (MS-RDI)
•
Multiplex section—remote error indication (MS-REI)
•
Phase lock loop (PLL)
•
Remote error indication (REI)
•
Severely errored frame (SEF)
55Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Tributary unit—alarm indication signal (TU-AIS)
•
Tributary unit—loss of pointer (TU-LOP)
•
Tributary unit—mismatch (TU-MIS)
•
Tributary unit—remote defect indication (TU-RD1)
•
Tributary unit—unequipped (TU-UNEQ)
•
DS1 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Remote alarm indication signal (RAIS)
•
DS1 error detection:
•
Bursty errored seconds (BES)
•
CRC errors
•
Errored seconds (ES)
•
Line errored seconds (LES)
•
Loss of framing seconds (LOFS)
•
Severely errored seconds (SES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
DS3 alarms:
(counters)
Documentation
Related
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Yellow alarm
•
DS3 error detection:
•
C-bit code violations (CCV)
•
C-bit errored seconds (CES)
•
C-bit severely errored framing seconds (CEFS)
•
CRC errors
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Far-end receive failure (FERF)
•
Line errored seconds (LES)
•
Parity bit (P-bit) code violations (PCV)
•
Parity bit (P-bit) errored seconds (PES)
•
Parity bit (P-bit) severely errored framing seconds (PSES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
Copyright © 2013, Juniper Networks, Inc.56
Channelized OC12/STM4 Enhanced IQ (IQE) PICs with SFP (T1600 Router)
• T1600 PICs Supported on page 5
57Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
Software release
Description
•
Junos OS Release 9.4 and later (Type 2)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One OC48/STM16 port
•
SONET or SDH is configurable on a per-port granularity
•
SONET channelization:
•
4 OC12 channels
•
16 OC3 channels
•
48 DS3 channels
•
672 DS1 channels
•
975 DS0 channels
•
SDH channelization:
•
4 STM4 channels
•
16 STM1 channels
•
48 E3 channels
•
504 E1 channels
•
48 DS3 channels
•
672 DS1 channels
•
975 DS0 channels
•
Power requirement: 1.10 A @ 48V (53 W)
•
Model number: PB-1CHOC48-STM16-IQE-SFP
•
Port is numbered 0.Hardware features
Copyright © 2013, Juniper Networks, Inc.58
Software features
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink
•
Packet buffering, Layer 2 parsing
•
M13/C-bit parity encoding
•
DS3 far-end alarm and control (FEAC) channel support
•
Local line, remote line, and remote payload loopback testing
•
Simple Network Management Protocol (SNMP): OC12, OC3 MIB, DS3 MIB, T1 MIB
•
Dynamic, arbitrary channel configuration
•
Full bit error rate test (BERT)
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Encapsulations available only for DS1:
•
Multilink Frame Relay end-to-end (MLFR FRF.15)
•
Multilink PPP (MLPPP)
•
PPP over Frame Relay
Cables and connectors
•
Duplex LC connector (Rx and Tx); single-mode fiber
•
SONET/SDH OC48/STM16 fiber-optic SFP transceivers:
•
Short reach (SR-1) (model number: SFP-1OC48-SR)
•
Intermediate reach (IR-1) (model number: SFP-1OC48-IR)
•
Long reach (LR-1) (model number: SFP-1OC48-LR)
Optical interfacespecifications—see SONET/SDHOC48/STM16OpticalInterface Specifications
59Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
SONET alarms:
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of pointer (LOP)
•
Loss of signal (LOS)
•
Payload label mismatch (PLM-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Remote error indication (REI)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Virtual container—alarm indication signal (VAIS)
•
Virtual container—loss of pointer (VLOP)
•
Virtual container—mismatch (VMIS)
•
Virtual container—remote defect indication (VRD1)
•
Virtual container—unequipped (VUNEQ)
•
SDH alarms:
•
Administrative unit alarm indication signal (AU-AIS)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Bit interleaved parity (BIP) error B1, B2, B3
•
Higher order path—alarm indication signal (HP-AIS)
•
Higher order path—far-end receive failure (HP-FERF)
•
Higher order path—payload label mismatch (HP-PLM)
•
Higher order path—loss of pointer (HP-LOP)
•
Higher order path—remote defect indication (HP-RDI)
•
Higher order path—unequipped (HP-UNEQ)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of signal (LOS)
•
Multiplex section—alarm indication signal (MS-AIS)
•
Multiplex section—far-end receive failure (MS-FERF)
•
Multiplex section—remote defect indication (MS-RDI)
•
Multiplex section—remote error indication (MS-REI)
•
Phase lock loop (PLL)
•
Remote error indication (REI)
•
Severely errored frame (SEF)
•
Tributary unit—alarm indication signal (TU-AIS)
Copyright © 2013, Juniper Networks, Inc.60
Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (T1600 Router)
•
Tributary unit—loss of pointer (TU-LOP)
•
Tributary unit—mismatch (TU-MIS)
•
Tributary unit—remote defect indication (TU-RD1)
•
Tributary unit—unequipped (TU-UNEQ)
•
DS1 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Remote alarm indication signal (RAIS)
•
DS1 error detection:
•
Bursty errored seconds (BES)
•
CRC errors
•
Errored seconds (ES)
•
Line errored seconds (LES)
•
Loss of framing seconds (LOFS)
•
Severely errored seconds (SES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
•
DS3 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Yellow alarm
•
DS3 error detection:
•
C-bit code violations (CCV)
•
C-bit errored seconds (CES)
•
C-bit severely errored framing seconds (CEFS)
•
CRC errors
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Far-end receive failure (FERF)
•
Line errored seconds (LES)
•
Parity bit (P-bit) code violations (PCV)
•
Parity bit (P-bit) errored seconds (PES)
•
Parity bit (P-bit) severely errored framing seconds (PSES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
(counters)
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
61Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Table 20: PICs Supported in Fourth Slot of T640-FPC2-E and T640-FPC2-E2 with Type 2 IQE
PICs
PIC Model NumberPIC Name
PB-2GE-SFPGigabit Ethernet, 2-port SFP
PB-4GE-SFPGigabit Ethernet, 4-port SFP
PB-2GE-SFP-QPPGigabit Ethernet IQ, 2-port SFP
PB-4OC12-SON-MMSONET/SDH OC12c/STM4, 4-port with multimode transceivers
installed
PB-4OC12-SON-SMIRSONET/SDH OC12c/STM4, 4-port with single-mode intermediate
reach transceivers installed
PB-1OC48–SON-SFPSONET/SDH OC48/STM16, 1-port SFP
PB-TUNNELTunnel Services
Related
Documentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.62
Channelized STM1 IQ PIC (T1600 Router)
•
Software release
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
Channelized STM1 IQ PIC (T1600 Router)
Description
Hardware features
Software features
Cables and connectors
•
One STM1 port
•
Power requirement: 0.39 A @ 48 V (18.6 W)
•
Fine-grained queuing per logical interface
•
Channelization: STM1c, fractional E1, framed and unframed DS0
•
Model number: PB-1CHSTM1-SMIR-QPP
•
Packet buffering, Layer 2 parsing
•
Local and remote loopback testing
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
SNMP: SONET/SDH MIB, T1/E1 MIB
•
Dynamic, arbitrary channel configuration
•
Full bit error rate test (BERT) patterns at E1 and DS0 levels
•
Encapsulations:
•
High-Level Data Link Control (HDLC)
•
Frame Relay
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Point-to-Point Protocol (PPP)
•
Duplex SC/PC connector (Rx and Tx)
•
Single-mode fiber
•
Intermediate-reach fixed transceiver
•
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
NOTE: This PIC supports only SDH.
63Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P)
•
Loss of frame (LOF)
•
Loss of pointer (LOP-P)
•
Loss of signal (LOS)
•
Payload mismatch (PLM-P)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
Error detection:
•
Errored seconds (ES-S, ES-L, ES-P)
•
Far-end bit errors, remote error indication—line (REI-L), far-end line coding violations (CV-LFE)
•
Far-end bit errors, remote error indication—path(REI-P),far-endpathcodingviolations(CV-PFE)
•
Far-end errored seconds (ES-LFE, ES-PFE)
•
Far-end severely errored seconds (SES-LFE, SES-PFE)
•
Far-end unavailable seconds (UAS-LFE, UAS-PFE)
•
Severely errored framing (SEF)
•
Severely errored framing seconds (SEFS-S)
•
Severely errored seconds (SES-S, SES-L, SES-P)
•
Unavailable seconds (UAS-L, UAS-P)
(counters)
Documentation
Related
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.64
DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
g002618
DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
Software release
Description
•
Junos OS Release 9.3R2 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four DS3 or E3 ports
•
DS3 or E3 is configurable on a per-port granularity
•
Power requirement: 0.51 A @ 48 V (24.7 W)
•
Model number: PB-4DS3-E3-IQE-BNC
•
Ports are numbered 0 through 3 top to bottomHardware features
65Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Maximum transmission units (MTUs) of up to 9192 bytes
•
Subrate and scrambling:
NOTE: Only DS3 interfaces support subrate and scrambling.
•
Digital Link/Quick Eagle
•
Kentrox
•
Larscom
•
ADTRAN
•
Verilink (subrate: only port A mode)
NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQ
interface.
•
Data service unit (DSU) functionality
•
B3ZS line encoding
•
Framing: M13, C-bit parity, framed clear channel
•
Full bit error rate test (BERT)
•
ANSI T1.403 FDL
•
Internal and loop clocking
•
DS3 far end alarm and control (FEAC) channel
•
Local line, remote line, and remote playback loopback testing
•
Simple Network Management Protocol (SNMP): DS3 MIB
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
•
Encapsulations:
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Extended Frame Relay for CCC and TCC
•
Flexible Frame Relay
•
Frame Relay
•
Frame Relay for CCC
•
Frame Relay for TCC
•
Frame Relay port CCC
•
High-Level Data Link Control (HDLC)
•
HDLC framing for CCC
•
HDLC framing for TCC
•
MPLS CCC
•
MPLS TCC
•
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
•
Point-to-Point Protocol (PPP)
•
PPP for CCC
•
PPP for TCC
•
Standard DS3 BNC coaxial cable interfacesCables and connectors
Copyright © 2013, Juniper Networks, Inc.66
DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)
LEDs
Alarms, errors, and
events
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
DS3 alarms:
•
Alarm indication signal (AIS)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Phase lock loop (PLL)
•
DS3 error detection:
•
C-bit code violations (CCV)
•
C-bit errored seconds (CES)
•
C-bit severely errored framing seconds (CEFS)
•
CRC errors
•
Excessive zeros (EXZ)
•
Far-end block error (FEBE)
•
Far-end receive failure (FERF)
•
Line errored seconds (LES)
•
Parity bit (P-bit) code violations (PCV)
•
Parity bit (P-bit) errored seconds (PES)
•
Parity bit (P-bit) severely errored framing seconds (PSES)
•
Severely errored framing seconds (SEFS)
•
Unavailable seconds (UAS)
(counters)
Documentation
Related
•
Layer 2 per-queue and per-channel packet and byte countersInstrumentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
67Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
E3 IQ PIC (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four E3 ports
•
Power requirement: 0.38 A @ 48 V (18 W)
•
Fine-grained queuing per logical interface
•
Model number: PB-4E3-QPP
•
Clear-channel (34.368-Mbps) and subrate E3
•
Unframed or ITU G.751 framing
•
Data service unit (DSU) functionality
•
Subrate and scrambling:
•
Digital Link/Quick Eagle
•
Kentrox
•
HDB3 line encoding
•
Full bit error rate test (BERT)
•
Local and remote loopback testing
Copyright © 2013, Juniper Networks, Inc.68
Software features
E3 IQ PIC (T1600 Router)
•
Quality of service (QoS) per port: weighted round-robin (WRR), random early detection (RED),
weighted random early detection (WRED)
•
Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB
•
Input policing and output shaping
•
Provider-side rate limiting
•
Full data link connection identifier (DLCI) range with sparse channel numbering
•
Per-DLCI queues with weighted deficit round-robin and strict priority
•
Encapsulations:
•
High-Level Data Link Control (HDLC)
•
Frame Relay
•
Circuit cross-connect (CCC)
•
Translational cross-connect (TCC)
•
Point-to-Point Protocol (PPP)
•
Standard E3 BNC coaxial cable interfacesCables and connectors
LEDs
Alarms, errors, and
events
(counters)
Related
Documentation
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
•
Alarm indication signal (AIS)
•
Equipment failure (does not affect service)
•
Frame error
•
Line code violation
•
Loss of signal (LOS)
•
Out of frame (OOF)
•
Yellow alarm bit (A-bit) disagreements
•
Layer 2 per-queue packet and byte countersInstrumentation
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
69Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Fast Ethernet PIC (T1600 Router)
•
Software release
Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
Description
Hardware features
Software features
Cables and connectors
•
4 100Base-TX ports
•
Power requirement: 0.14 A @ 48 V (6.8 W)
•
Model number: PB-4FE-TX
•
High-performance throughput on each port at speeds up to 100 Mbps
•
Source and destination Media Access Control (MAC) address filtering
•
RMON EtherStats packet buffering
•
802.3 Ethernet standard compliant
•
MTUs up to 4500 bytes
•
1,024 autosensing 802.1q VLANs per port
•
Autosensing full-duplex and half-duplex modes
•
Virtual Router Redundancy Protocol (VRRP)
•
802.1q virtual LANs (VLANs)
•
Circuit cross-connect (CCC) VLAN
4-port PIC:
•
Connector: Two-pair, Category 5 unshielded twisted-pair connectivity through an RJ-45
connector
•
Pinout: MDI noncrossover
Copyright © 2013, Juniper Networks, Inc.70
Fast Ethernet PIC (T1600 Router)
LEDs
Documentation
Related
Status LED, one bicolor:
•
Off—PIC ports not enabled.
•
Green—PIC is operating normally.
•
Red—PIC has an error or failure.
4-port PIC—One pair of port LEDs:
•
Link LED—If green, the port is online; if there is no light, the port is down.
•
RX LED—If flashing green, the port is receiving data; if there is no light, the port might be on but
is not receiving data.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
71Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Gigabit Ethernet PICs with SFP (T1600 Router)
Figure 7: 2-Port Gigabit Ethernet PICFigure 6: 1-Port Gigabit Ethernet PIC
Figure 9: 10-Port Gigabit Ethernet PICFigure 8: 4-Port Gigabit Ethernet PIC
Copyright © 2013, Juniper Networks, Inc.72
Software release
Description
Gigabit Ethernet PICs with SFP (T1600 Router)
•
1-port: Junos OS Release 8.5 and later (Type 1)
•
2-port: Junos OS Release 8.5 and later (Type 2)
•
4-port: Junos OS Release 8.5 and later (Type 2)
•
10-port: Junos OS Release 8.5 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
One, two, four, or ten Gigabit Ethernet ports
•
Power requirement:
•
1-port: 0.25 A @ 48 V (11.9 W)
•
2-port: 0.25 A @ 48 V (11.9 W)
•
4-port: 0.50 A @ 48 V (23.8 W)
•
10-port: 0.62 A @ 48 V (29.9 W)
•
Supports largeEthernet frame sizes for more efficient throughput across the intra-POP network
•
Model number for 1-Port Gigabit Ethernet PIC: PB-1GE-SFP
•
Model number for 2-Port Gigabit Ethernet PIC: PB-2GE-SFP
•
Model number for 4-Port Gigabit Ethernet PIC: PB-4GE-SFP
•
Model number for 10-Port Gigabit Ethernet PIC: PB-10GE-SFP
Hardware features
Software features
•
High-performance throughput on each port at speeds up to 1 Gbps
•
Autonegotiation between Gigabit Ethernet circuit partners
•
Full-duplex mode
•
Maximum transmission units (MTUs) of up to 9192 bytes
•
Virtual Router Redundancy Protocol (VRRP) support
•
802.1q virtual LANs (VLANs) support
•
960 destination MAC filters per port
•
Optical diagnostics and related alarms on the 2-port, 4-port, and 10-port PICs
•
64 source MAC filters per VLAN on the 1-port, 2-port, and 4-port PICs
•
1024 source MAC filters per port on the 1-port, 2-port, and 4-port PICs
•
Flexible Ethernet encapsulation on the 1-port, 2-port, and 4-port PICs
•
Multiple tag protocol identifiers (TPID) support on the 1-port, 2-port, and 4-port PICs
•
Source MAC learning on the 1-port, 2-port, and 4-port PICs
•
MAC accounting and policing—Dynamic local address learning of source MAC addresses on
the 1-port, 2-port, and 4-port PICs
•
Passive monitoring for IPv4 packets on the 10-port PIC for Junos OS Release 11.1 and later.
NOTE: The 10-port Gigabit Ethernet PIC with SFP does not support MAC accounting and policing,
MAC learning, TPID, or flexible Ethernet encapsulation.
The 10-port Gigabit Ethernet PIC supports 64 source MAC filters per port.
73Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Cables and connectors
You can install any transceiver supported by the PIC.
•
Fiber-optic SFP transceivers:
•
Duplex LC/PC connector (Rx and Tx)
•
1000BASE-LH (model number: SFP-1GE-LH)
•
1000BASE-LX (model number: SFP-1GE-LX)
•
1000BASE-SX (model number: SFP-1GE-SX)
•
Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15withSFP-GE40KT15R13)—See
Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
•
Copper transceiver:
•
Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45
connector
•
1000BASE-T (model number: SFP-1GE-T)
•
Pinout: MDI crossover
•
Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface
Specifications
LEDs
Documentation
Related
NOTE: Do not install Gigabit Ethernet SFPs in the SONET/SDH port. The port will not recognize
the SFP.
Status LED, one bicolor:
•
Off—PIC is not enabled.
•
Green—PIC is operating normally.
•
Red—PIC has an error or failure.
Port LEDs, one pair per port:
•
Link—If green, the port is online; if there is no light, the port is down.
•
Activity—If flashing green, the port is receiving data; if there is no light, the port might be on but
is not receiving data.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.74
Gigabit Ethernet IQ PICs with SFP (T1600 Router)
Figure 11: 2-Port Gigabit Ethernet IQ PICFigure 10: 1-Port Gigabit Ethernet IQ PIC
Gigabit Ethernet IQ PICs with SFP (T1600 Router)
Software release
Description
Hardware features
Software features
•
1-port: Junos OS Release 8.5 and later (Type 1)
•
2-port: Junos OS Release 8.5 and later (Type 2):
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
One or two Gigabit Ethernet ports
•
Power requirement: 0.46 A @ 48 V (22 W)
•
Fine-grained queuing per logical interface
•
Model number for 1-Port Gigabit Ethernet IQ PIC: PB-1GESFP-QPP
•
Model number for 2-Port Gigabit Ethernet IQ PIC: PB-2GE-SFP-QPP
•
High-performance throughput on each port at speeds up to 1 Gbps
•
Full-duplex mode
•
Large MTUs of up to 9192 bytes
•
Optical diagnostics and related alarms
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Virtual Router Redundancy Protocol (VRRP) support
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Flexible Ethernet encapsulation
•
MAC policing, accounts, and filters
75Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Cables and connectors
You can install any transceiver supported by the PIC.
•
Fiber-optic small form-factor pluggable (SFP) transceivers:
•
Duplex LC/PC connector (Rx and Tx)
•
1000BASE-LH (model number: SFP-1GE-LH)
•
1000BASE-LX (model number: SFP-1GE-LX)
•
1000BASE-SX (model number: SFP-1GE-SX)
•
Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15withSFP-GE40KT15R13)—See
Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
•
Copper transceiver:
•
Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45
connector
•
1000BASE-T (model number: SFP-1GE-T)
•
Pinout: MDI crossover
•
Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface
Specifications
LEDs
Documentation
Related
NOTE: Do not install SONET/SDH OC48c/STM16 SFPs in a Gigabit Ethernet port. The port will
not recognize the SFP.
Status LED, one tricolor:
•
Off—Not enabled.
•
Green—Online with no alarms or failures.
•
Yellow—Online with alarms for remote failures.
•
Red—Active with a local alarm; router has detected a failure.
NOTE: The green Status LED is lit on the 2-port Gigabit Ethernet IQ PIC when at least one port
is online.
Port LEDs, one per port:
•
Off—Port is down.
•
Green—Link is established.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.76
Gigabit Ethernet IQ2 PICs with SFP (T1600 Router)
Gigabit Ethernet IQ2 PICs with SFP (T1600 Router)
Figure 12: 4-Port Gigabit Ethernet IQ2 PIC
(Type 1)
Figure 13: 8-Port Gigabit Ethernet IQ2 PIC
(Type 2)
77Copyright © 2013, Juniper Networks, Inc.
g002378
T1600 Core Router Interface Module Reference
Figure 14: 8-Port Gigabit Ethernet IQ2 PIC (Type 3)
Software release
Description
Hardware features
•
4-port: Junos OS Release 8.5 and later (Type 1)
•
8-port: Junos OS Release 8.5 and later (Type 2)
•
8-port: Junos OS Release 8.5 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
Four or eight Gigabit Ethernet ports
•
Power requirement:
•
4-port: 0.65 A @ 48 V (31 W)
•
8-port (Type 2): 0.89 A @ 48 V (42.5 W)
•
8-port (Type 3): 1.25 A @48 V (60 W)
•
Model number for 4-Port Gigabit Ethernet IQ2 PIC: PB-4GE-TYPE1-SFP-IQ2
•
Model number for 8-Port Type 2 Gigabit Ethernet IQ2 PIC: PB-8GE-TYPE2-SFP-IQ2
•
Model number for 8-Port Type 3 Gigabit Ethernet IQ2 PIC: PC-8GE-TYPE3-SFP-IQ2
•
High-performance throughput: speeds up to 1 Gbps on each port
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
Copyright © 2013, Juniper Networks, Inc.78
Software features
Cables and connectors
Gigabit Ethernet IQ2 PICs with SFP (T1600 Router)
•
Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs
•
Optical diagnostics and related alarms
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Virtual Router Redundancy Protocol (VRRP) support
•
Hierarchical shaping
•
Fine-grained queuing and shaping per logical interface at both ingress and egress
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
802.1p rewrite per channel
•
Flexible mapping of channels and scheduler resources at both ingress and egress
•
Flexible Ethernet encapsulation
•
MAC learning, policing, accounting, and filtering
•
You can install any transceiver supported by the PIC.
NOTE: Do not install SONET/SDH SFPs in the Gigabit Ethernet port. The port will not recognize
the SFP.
•
Fiber-optic SFP transceivers:
•
Duplex LC/PC connector (Rx and Tx)
•
1000BASE-LH (model number: SFP-1GE-LH)
•
1000BASE-LX (model number: SFP-1GE-LX)
•
1000BASE-SX (model number: SFP-1GE-SX)
•
Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15withSFP-GE40KT15R13)—See
Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
•
Copper transceiver:
•
Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45
connector
•
1000BASE-T (model number: SFP-1GE-T)
•
Pinout: MDI crossover
•
Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface
Specifications
79Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Documentation
Related
OK or Status LED, one tricolor:
•
Off—PIC is offline and it is safe to remove it from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
APP LED, one bicolor:
•
Off—Monitoring application is not running.
•
Green—Monitoring application is running under acceptable load.
Port LEDs, one per port:
•
Off—Port is not enabled.
•
Green—Port is online with no alarms or failures.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.80
g004421
g004420
Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (T1600 Router)
Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (T1600 Router)
Figure 15: 4-Port Gigabit Ethernet IQ2E PIC
(Type 1)
Figure 16: 8-Port Gigabit Ethernet IQ2E PIC
(Type 2)
81Copyright © 2013, Juniper Networks, Inc.
g004422
T1600 Core Router Interface Module Reference
Figure 17: 8-Port Gigabit Ethernet IQ2E PIC (Type 3)
Software release
Description
Hardware features
•
4-port: Junos OS Release 9.4 and later (Type 1)
•
8-port: Junos OS Release 9.4 and later (Type 2)
•
8-port: Junos OS Release 9.4 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
Four or eight Gigabit Ethernet ports
•
Power requirement:
•
4-port: 0.67 A @ 48 V (32 W)
•
8-port (Type 2): 0.92 A @ 48 V (44 W)
•
8-port (Type 3): 1.25 A @48 V (60 W)
•
Model number for 4-Port Gigabit Ethernet Enhanced IQ2 PIC: PB-4GE-TYPE1-SFP-IQ2E
•
Model number for 8-Port Type2 Gigabit Ethernet Enhanced IQ2 PIC: PB-8-GE-TYPE2-SFP-IQ2E
•
Model number for 8-Port Type3 Gigabit Ethernet Enhanced IQ2 PIC: PB-8-GE-TYPE3-SFP-IQ2E
•
High-performance throughput: speeds up to 1 Gbps on each port
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
Copyright © 2013, Juniper Networks, Inc.82
Software features
Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (T1600 Router)
•
Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs
•
Optical diagnostics and related alarms
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Drop statistics reported per queue for each of four priority-based drop profiles
•
Four levels of strict priorities with priority propagation among scheduling levels
•
Hierarchical shaping and hierarchical scheduler
•
Virtual Router Redundancy Protocol (VRRP) support
•
Fine-grained queuing and shaping per logical interface at both ingress and egress
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
802.1p rewrite per channel
•
Flexible mapping of channels and scheduler resources at both ingress and egress
•
16,000 schedulers (2,000 schedulers with 8 queues each or 4,000 schedulers with 4 queues
each)
•
Scheduler resources dynamically allocated across ports
•
Flexible Ethernet encapsulation
•
MAC learning, policing, accounting, and filtering
Cables and connectors
•
You can install any transceiver supported by the PIC.
NOTE: Do not install SONET/SDH SFPs in the Gigabit Ethernet port. The port will not recognize
the SFP.
•
Fiber-optic small form-factor pluggable transceivers (SFPs):
•
Duplex LC/PC connector (Rx and Tx)
•
Small form-factor pluggable (SFP) transceivers:
•
1000BASE-LH (model number: SFP-1GE-LH)
•
1000BASE-LX (model number: SFP-1GE-LX)
•
1000BASE-SX (model number: SFP-1GE-SX)
•
Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface
Specifications
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with
SFP-GE40KT15R13)—See Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical
Interface Specifications
•
Copper transceiver:
•
Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45
connector
•
1000BASE-T (model number: SFP-1GE-T)
•
Pinout: MDI crossover
Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface
Specifications
83Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Documentation
Related
OK or Status LED, one tricolor:
•
Off—PIC is offline and it is safe to remove it from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
APP LED, one bicolor:
•
Off—Monitoring application is not running.
•
Green—Monitoring application is running under acceptable load.
Port LEDs, one per port:
•
Off—Port is not enabled.
•
Green—Port is online with no alarms or failures.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.84
10-Gigabit Ethernet IQ2 PIC with XFP (T1600 Router)
10-Gigabit Ethernet IQ2 PIC with XFP (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 8.5 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18.
•
One 10-Gigabit Ethernet port
•
Power requirements: 1.2 A @48 V (56 W)
•
Model number: PB-1XGE-TYPE3-XFP-IQ2
•
High-performance throughput
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3125 Gbps
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
85Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Configurable WAN-PHY mode options:
•
loopback
•
mpls
•
path-trace
•
trigger
•
Virtual Router Redundancy Protocol (VRRP) support
•
Hierarchical shaping
•
Fine-grained queueing and shaping per logical interface at both ingress and egress
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
802.1p rewrite per channel
•
Flexible mapping of channels and scheduler resources at both ingress and egress
•
Flexible Ethernet encapsulation
•
MAC learning, policing, accounting, and filtering
Cables and connectors
LEDs
•
You can install any transceiver supported by the PIC.
•
Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
•
Duplex LC/PC connector (Rx and Tx)
•
10-Gigabit Ethernet XFP transceivers:
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
OK LED, one tricolor:
•
Off—PIC is offline and safe to remove from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
APP LED, one:
•
Off—Monitoring application is not running.
•
Green—Monitoring application is running under acceptable load.
•
Yellow—Monitoring application is overloaded.
Link status LED, one:
Related
Documentation
•
Off—Port is down.
•
Green—Port is online. Link is established.
T1600 PIC Description on page 3•
Copyright © 2013, Juniper Networks, Inc.86
10-Gigabit Ethernet IQ2 PIC with XFP (T1600 Router)
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
87Copyright © 2013, Juniper Networks, Inc.
g004423
T1600 Core Router Interface Module Reference
10-Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with XFP (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 9.4 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One 10-Gigabit Ethernet port
•
Power requirements: 1.2 A @48 V (56 W)
•
Model number: PB-1XGE-TYPE3-XFP-IQ2E
•
High-performance throughput
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3125 Gbps
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
Copyright © 2013, Juniper Networks, Inc.88
Software features
10-Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with XFP (T1600 Router)
•
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
•
Drop statistics reported per queue for each of four priority-based drop profiles
•
Four levels of strict priorities with priority propagation among scheduling levels
•
Hierarchical shaping and hierarchical scheduler
•
Configurable WAN-PHY mode options:
•
loopback
•
mpls
•
path-trace
•
trigger
•
Virtual Router Redundancy Protocol (VRRP) support
•
Fine-grained queueing and shaping per logical interface at both ingress and egress
•
802.1q virtual LANs (VLANs)
•
VLAN stacking and rewriting
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
802.1p rewrite per channel
•
Flexible mapping of channels and scheduler resources at both ingress and egress
•
16,000 schedulers (2,000 schedulers with 8 queues each or 4,000 schedulers with 4 queues
each)
•
Scheduler resources dynamically allocated across ports
•
Flexible Ethernet encapsulation
•
MAC learning, policing, accounting, and filtering
Cables and connectors
•
You can install any transceiver supported by the PIC.
•
Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
•
Duplex LC/PC connector (Rx and Tx)
•
10-Gigabit Ethernet XFP transceivers:
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
89Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
LEDs
Documentation
Related
OK LED, one tricolor:
•
Off—PIC is offline and safe to remove from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
APP LED, one:
•
Off—Monitoring application is not running.
•
Green—Monitoring application is running under acceptable load.
•
Yellow—Monitoring application is overloaded.
Link status LED, one:
•
Off—Port is down.
•
Green—Port is online. Link is established.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.90
10-Gigabit Ethernet PIC with XENPAK (T1600 Router)
10-Gigabit Ethernet PIC with XENPAK (T1600 Router)
Software release
Description
Hardware features
Software features
•
Junos OS Release 8.5 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One 10-Gigabit Ethernet port
•
Power requirement: 0.55 A @ 48 V (26.6 W)
•
Supports largeEthernet frame sizes for more efficient throughput across the intra-POP network
•
Model number: PC-1XGE-XENPAK
•
High-performance throughput at speeds up to 10 Gbps
•
Full-duplex mode
•
Maximum transmission units (MTUs) up to 9192 bytes
•
64 source MAC address filters
•
960 destination MAC filters
•
Virtual Router Redundancy Protocol (VRRP) support
•
802.1q virtual LANs (VLANs) support
•
802.3ad link aggregation support
•
RMON EtherStats
•
Optical diagnostics and related alarms :
•
Transceiver temperature
•
Laser bias current
•
Laser output power
•
Receive optical power
91Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Cables and connectors
Duplex SC/PC connector (RX and TX)
•
10-Gigabit Ethernet XENPAK transceivers:
•
10GBASE-SR, LAN Rate (model number: XENPAK-1XGE-SR)
•
10GBASE-LR, LAN Rate (model number: XENPAK-1XGE-LR)
•
10GBASE-ER, LAN Rate (model number: XENPAK-1XGE-ER)
•
10GBASE-ZR, LAN Rate (model number: XENPAK-1XGE-ZR) EOL (see notification
PSN-2010-02-649)
Optical interfacespecifications—see 10-Gigabit Ethernet 10GBASE Optical Interface Specifications
LEDs
Documentation
Related
Status LED, one bicolor:
•
Off—PIC is not enabled.
•
Green—PIC is operating normally.
•
Red—PIC has an error or failure.
Port LEDs, one pair:
•
Link—If green, the port is online; if there is no light, the port is down.
•
RX—If flashing green, the port is receiving data; if there is no light, the port might be on but is
not receiving data.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.92
PRIMARY
g004436
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600 Router)
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 10.1 and later (Type 4)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
NOTE: In some Juniper Networks documentation, the 10-Gigabit Ethernet LAN/WAN PIC with
SFP+ (PD-5-10XGE-SFPP) is referred to as the 10-port 10-Gigabit Oversubscribed Ethernet PIC.
In oversubscribed Ethernet mode (default), all 10 ports are enabled and oversubscription is
permitted. In line-rate mode, this PIC does not allow oversubscription and supports only 5 ports
(0, 2, 4, 6, and 8).
•
Ten 10-Gigabit Ethernet SFP+ ports (only ports 0, 2, 4, 6, and 8 are supported in line-rate mode)
•
Total bandwidth: 50 Gbps
•
Power requirements: 3.3 A @ –48 V (158.4 W)
•
Model number: PD-5-10XGE-SFPP
•
High-performance throughput:
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3 Gbps
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
93Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Software features
Two modes of operation: 5 ports in line-rate mode, 10 ports in oversubscribed mode
•
Intelligent handling of oversubscribed traffic
•
Flexible mapping of port-assigned queues and scheduler resources at both ingress and egress
•
Strict-priority queue available on a per-port basis
•
QoS available on a per-port basis
•
Weighted round-robin (WRR)
•
L2 Protocol support:
•
Ethernet CCC, Ethernet TCC, Ethernet VPLS
•
VLAN CCC
•
Extended VLAN TCC
•
VLAN VPLS
•
Flexible-Ethernet-services
•
L3 Protocol support
•
IPv4
•
IPv6
•
MPLS
•
VLAN support
•
4000 VLANs per PIC
•
Flex-VLAN tagging support
•
Interrupt driven link-down detection
•
Pause frame support
•
Jumbo frame support
•
MAC learning, aging, policing, and filtering
•
Virtual Router Redundancy Protocol (VRRP) support
•
IEEE 802.3ad Link Aggregation (For routers in a routing matrix, Junos OS Release 11.2 and later
is required)
NOTE: For PICs that support oversubscription, the PIC must be in line-rate mode to support
aggregated Ethernet.
Cables and connectors
•
DSCP rewrite is supported for Junos OS Release 11.4 and later.
•
Duplex LC/PC connector (Rx and Tx)
•
10-Gigabit SFP+ transceivers:
•
10GBASE-ER (model number: SFPP-10GE-ER) Junos OS Release 12.1 and later
•
10GBASE-LR (model number: SFPP-10GE-LR)
•
10GBASE-SR (model number: SFPP-10GE-SR)
•
10GBASE-ZR (model number: SFPP-10GE-ZR) Junos OS Release 12.3 and later
•
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Copyright © 2013, Juniper Networks, Inc.94
10-Gigabit Ethernet LAN/WAN PIC with Oversubscription and SFP+ (T1600 Router)
LEDs
STATUS LED, one tricolor:
•
Off—PIC is offline and safe to remove from the router.
•
Green—PIC is operating normally.
•
Yellow—PIC is initializing.
•
Red—PIC has an error or failure.
Port LEDs, one pair for each port:
•
LINK LED
•
Off—Port is not enabled.
•
Green—Port is online with no alarms or failures.
•
Red—The router has detected a failure with alarms.
•
ACT LED
•
Green flashing—Port is sending or receiving packets.
•
Off—No packet activity detected on the port.
CAUTION: A T1600 router with the following power supply configurations
and operating conditions can accommodatea maximum of sixteen10-Gigabit
Ethernet LAN/WAN PICs with SFP+ :
•
One or two AC power supplies.
Related
Documentation
•
Two DC powersupplies in load-sharing mode with an input voltage between
–43 VDC and –72 VDC.
•
One DC power supply with an input voltage between –43 VDC and –72
VDC.
However, a router with only one DC power supply with an input voltage
between –40 VDC and –43 VDC might not be able to support the maximum
number of 10-Gigabit Ethernet LAN/WAN PICs with SFP+. For more
information, see technical bulletin SN-2010-03-695.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
95Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
10-Gigabit Ethernet LAN/WAN PIC with XFP (T1600 Router)
Software release
Description
Hardware features
•
Junos OS Release 9.0 and later (Type 4)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
Four 10-Gigabit Ethernet ports
•
Power requirements: 0.9 A @48 V (43 W)
•
Model number: PD-4XGE-XFP
•
High-performance throughput
•
WAN-PHY mode at 9.953 Gbps
•
LAN-PHY mode at 10.3125 Gbps
•
Full-duplex mode
•
Large maximum transmission units (MTUs) of up to 9192 bytes
Copyright © 2013, Juniper Networks, Inc.96
Software features
10-Gigabit Ethernet LAN/WAN PIC with XFP (T1600 Router)
•
Configurable WAN-PHY mode options:
•
loopback
•
mpls
•
path-trace
•
trigger
•
Optical diagnostics, monitoring, and alarms supported in Junos OS Release 10.4.
•
Flexible Ethernet Services Encapsulation
•
802.1q virtual LANs (VLANs)
•
Ethernet OAM 802.1ag continuity check
•
Ethernet OAM 802.3ah (remote loopback is not supported for this PIC)
•
VLAN stacking
•
Channels defined by two stacked VLAN tags
•
Multiple tag protocol identifiers (TPID) support
•
IP service for nonstandard TPID and stacked VLAN tags
•
Passive flow monitoring supported in Junos OS Release 11.2 and later
•
MAC learning, accounting, and filtering
•
Virtual Router Redundancy Protocol (VRRP) support
Cables and connectors
LEDs
•
You can install any transceiver supported by the PIC.
•
Connector: Duplex LC/PC (Rx and Tx)
•
Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
•
10GBASE-S (model number: XFP-10G-S)
•
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
•
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
•
10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
•
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
•
DWDM Tunable XFP transceivers:
•
10GBASE-ZR (model number: XFP-10G-CBAND-T50-ZR) supported in Junos OS Release
10.2 and later
•
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
•
DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths
Port LED, one for each port:
•
Off—Port is not enabled.
•
Green—Port is online with no alarms or failures.
•
Yellow—Port is online with alarms for remote failures.
•
Red—The router has detected a failure with alarms for local failures.
97Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
Alarms
Documentation
Related
Alarms are vendor-specific. Some transceiver vendors might not support every alarm.
•
Input laser power
•
Input loss of lock
•
Input loss of signal
•
Input Rx path
•
Output A/D data not ready
•
Output CDR (clock data recovery)
•
Output laser bias current
•
Output laser power
•
Output laser safety
•
Output Tx path
•
Module temperature
•
Module MOD_NR (module not ready)
•
Module P_DOWN (module down)
•
Module unplugged or down
•
Wire unplugged or down
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.98
10-Gigabit Ethernet DWDM PIC (T1600 Router)
10-Gigabit Ethernet DWDM PIC (T1600 Router)
Software release
Description
Hardware features
Software features
•
Junos OS Release 8.5 and later (Type 3)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility”on page 18.
•
One 10-Gigabit Ethernet port
•
Power requirement: 0.55 A @ 48 V (26.6 W)
•
Supports largeEthernet frame sizes for more efficient throughput across the intra-POP network
•
Model number: PB-1XGE-DWDM-CBAND
•
C-band ITU-Grid with 100 GHz spacing
•
High-performance throughput at speeds up to 10 Gbps
•
Full-duplex mode
•
Maximum transmission units (MTUs) up to 9192 bytes
•
64 source MAC address filters
•
960 destination MAC filters
•
45 individual wavelengths: 1528.77nm, 1529.55 nm, 1530.33 nm, 1531.12 nm, 1531.90 nm, 1532.68
nm, 1533.47 nm, 1534.25 nm, 1535.04 nm, 1535.82 nm, 1536.61 nm, 1537.40 nm, 1538.19 nm,
1538.98 nm, 1539.77 nm, 1540.56 nm, 1541.35 nm, 1542.14 nm, 1542.94 nm, 1543.73 nm, 1544.53
nm, 1545.32 nm, 1546.12 nm, 1546.92 nm, 1547.72 nm, 1548.52 nm, 1549.32 nm, 1550.12 nm,
1550.92 nm, 1551.72 nm, 1552.52 nm, 1553.33 nm, 1554.13 nm, 1554.94 nm, 1555.75 nm, 1556.56
nm, 1557.36 nm, 1558.17 nm, 1558.98 nm, 1559.79 nm, 1560.61 nm, 1561.42 nm, 1562.23 nm,
1563.05 nm, 1563.86 nm
•
Enhanced optical monitoring capabilities
•
CLI configurable wavelength support
•
Virtual Router Redundancy Protocol (VRRP) support
•
802.1q virtual LANs (VLANs) support
•
802.3ad link aggregation support
•
RMON EtherStats
99Copyright © 2013, Juniper Networks, Inc.
T1600 Core Router Interface Module Reference
•
Cables and connectors
Duplex SC/PC connector (RX and TX)
•
Fixed 10-Gigabit Ethernet DWDM transceiver
•
Optical interfacespecifications—see 10-Gigabit Ethernet DWDM Optical InterfaceSpecifications.
LEDs
Documentation
Related
Status LED, one bicolor:
•
Off—PIC is not enabled.
•
Green—PIC is operating normally.
•
Red—PIC has an error or failure.
Port LEDs, one pair:
•
Link—If green, the port is online; if there is no light, the port is down.
•
RX—If flashing green, the port is receiving data; if there is no light, the port might be on but is
not receiving data.
T1600 PIC Description on page 3•
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
Copyright © 2013, Juniper Networks, Inc.100
Loading...