JUMO JU 401015-453-10 Datasheet

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

JUMO MAERA S25

Level probe

Applications

Level and level measurements

• In rainwater cisterns

• In gray water recycling

• Heating oil and diesel oil tanks

• In AUS32 (known in Europe as "AdBlue®", "DEF" in North America, or "ARLA 32" in Brazil)

Brief description

The JUMO MAERA S25 level probe is used for the continuous hydrostatic level measurement of
liquids. Filling heights between 2.50 mWS and 10 mWS (water column) can be achieved in ven­tilated tanks.

When the level probe is immersed into a liquid, a liquid column emerges above the probe. The
liquid column increases as the probe is immersed deeper into the liquid and creates a hydrostatic
pressure on the measuring system by the force of its weight. The measured pressure is trans­ferred as a standard signal. The signal is linearly proportional to the rising liquid column.

Any variations in air pressure are automatically compensated for using a protective hose and the
surrounding pressure is therefore taken into account.

Further information on our level probes from the JUMO MAERA series can be found in the bro­chure "Level probes – Hydrostatic level and level measurement" in the documentation.

1

Page 1/10Data Sheet 401015

Customer benefits

• Economic

The standardized, constructive design and constant optimization of the production process
result in an excellent price-performance ratio of the level probe.

• Process-reliable

The core of the level probe is a piezoresistive measuring cell, which features high overload
resistance and is particularly safe, reliable, and temperature resistant. Each level probe is
tested in a fully automated measuring and calibration facility to ensure consistently high
product quality. A reverse-polarity protection mechanism protects the measuring instrument
against damage, ensuring maximum safety during startup.

1

These recommendations are based on many years of experience; however, in individual cas­es they may not be fully applicable. We would be happy to provide further information, includ­ing regarding additional applications.

Type 401015 with process connection 707

Special features

• Level probe for continual level measure­ment in liquids

• Measuring ranges: 250 mbar to 1 bar
(2.5 to 10 mWS)

• Medium temperature 0 to 50 °C

• Piezoresistive silicon sensor

• Accuracy: 0.3% MSP

• Sensor technology proven thousands of
times over

• Reverse-polarity protection mechanism

• Suitable for indoor installation

2

MSP = measuring span

2

(linearity)

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Technical data

General Information

Reference conditions DIN 16086 and DIN EN 60770

Measuring principle Piezoresistive sensor with stainless steel separating membrane

Pressure transfer means Synthetic oil

Admissible load changes > 10 million, 0 to 100 % measuring range

Mounting position Vertical/hanging from the cable

Mechanical features

Ensure the medium durability of the material!

Process connection

Material

Process connection 567 Stainless steel 316 L

Process connection 707 Stainless steel 316 Ti

Measuring membranes

Material Stainless steel 316 L

Case

Material Stainless steel 304

Protective cap

Material Hard PVC

Weight 90 g (without cable)

Diameter 25 mm

Page 2/10Data Sheet 401015

Output

Analog output

Current

Output 405 4 to 20 mA, two-wire

Voltage

Output 412 DC 0.5 to 4.5 V, three-wire, ratiometric 10 to 90 % of the voltage supply

Output 415 DC 0 to 10 V, three-wire

Output 418 DC 1 to 5 V, three-wire

Output 420 DC 1 to 6 V, three-wire

Step response

T

90

Burden

Current

4 to 20 mA, two-wire R

Voltage

DC 0.5 to 4.5 V, three-wire R

DC 0 to 10 V, three-wire R

DC 1 to 5 V, three-wire R

DC 1 to 6 V, three-wire R

 10 ms

 (UB-10 V) ÷ 0.02 A ( )

L

 20 k

L

 10 k

L

 10 k

L

 10 k

L

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Environmental influences

Admissible temperatures

Medium 0 to 50 °C

The device must not freeze in the medium!
A restriction may be required depending on the medium.

Storage -20 to +80 °C, dry

Electromagnetic compatibility

Interference emission

Interference immunity

Protection type

a

According to EN 61326-1

b

According to EN 61326-2-3

c

According to EN 60529

a

b

c

Class B

Industrial requirements

IP68, submersible to 20 m

Measuring range and accuracy

Page 3/10Data Sheet 401015

Measuring range Linearity

bar % MSP % MSP % MSP % MSP

a

Accuracy at Long-term

20 °C

c

0to50°C

d

stability

b

Overload
capability

Burst
pressure

bar bar

per year

0 to 0.25 bar relative pressure 0.3 0.5 1 ≤ 0.3 0.75 1

0 to 0.4 bar relative pressure 0.3 0.5 1 1.2 1.6

0 to 0.6 bar relative pressure 0.3 0.5 1 1.8 2.4

0 to 1 bar relative pressure 0.3 0.5 1 3 4

a

Linearity according to limit point setting

b

Reference conditions EN 61298-1

c

Includes: linearity, hysteresis, repeatability, deviation from measuring range start (offset), and measuring range end

d

Includes: linearity, hysteresis, repeatability, deviation from measuring range start (offset) and measuring range end, thermal influences on mea­suring range start (offset), and measuring span

Auxiliary power

Voltage supply U

4 to 20 mA, two-wire (output 405) DC 10 to 30 V, nominal voltage DC 24 V

DC 0.5 to 4.5 V, three-wire (output 412) DC 5 V

DC 0 to 10 V, three-wire (output 415) DC 11.5 to 30 V, nominal voltage DC24V

DC 1 to 5 V, three-wire (output 418) DC 10 to 30 V, nominal voltage DC 24 V

DC 1 to 6 V, three-wire (output 420) DC 10 to 30 V, nominal voltage DC 24 V

a

The voltage peaks must not exceed or fall below the specified voltage supply values!

Reverse voltage protection Yes (except output 412)

Max. current consumption 25 mA

Electrical circuit SELV

Requirements The device must be equipped with an electrical circuit that meets the requirements of EN 61010-

a

B

1 with regard to "Limited-energy circuits".

V5.00/EN/00534318

40101500T10Z001K000

Page 4/10Data Sheet 401015

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Electrical connection

For this construction, a stranded PVC cable is encased in an application-oriented protective hose made from either PE or PA.

To prevent moisture penetrating into the protective hose, in this case the pressure equalization hose, the delivery includes a hose end piece with
the fitting materials.

Protective hose

Material PE, PA

a

Color Natural

Outer diameter 8 mm

Bending radius Approx. 120 mm

It is vital to take into account that if the protective hose is kinked or pinched, this will prevent am­bient pressure compensation.

Admissible medium temperatures 0 to 50 °C (depending on the medium and the level probe)

Yield stress

PE protective hose 10 M Pa

PA protective hose 22 M Pa

a

Depending on the version ordered

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Dimensions

(c)

Process connection

Page 5/10Data Sheet 401015

567

G 1/4 female

659

Connection open at bottom

(a) Cable length according to customer preference (a) Cable length according to customer preference

(b) Ø 4.6 for three-wire output (b) Ø 4.6 for three-wire output

(c) Maximum screw-in depth (c) The protective cap is provided for transportation and has to

(d) The protective cap has three bore holes (Ø 3) and protects

be removed before implementing.

the case against contact corrosion and the sensitive separat­ing membrane.

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

707

19

M3 (× 0.5) female

Page 6/10Data Sheet 401015

(a) Cable length according to customer preference

(b) Ø 4.6 for three-wire output

Accessories

Terminal head for pressure compensation

Tank cover mounting Wall mounting

Part no. 00602743 Part no. 00602744

V5.00/EN/00534318

40101500T10Z001K000

Page 7/10Data Sheet 401015

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Connection diagram

The connection diagram in the data sheet provides preliminary information about the connection options. For the electrical connection, only use
the installation instructions or the operating manual. The knowledge and the correct technical compliance with the safety information and warnings
contained in these documents are mandatory for mounting, electrical connection, and startup as well as for safety during operation.

Connection Terminal assignment

a

Cable

4 to 20 mA, two-wire (output 405)

Voltage supply DC 10 to 30 V,
Rated voltage supply DC 24 V

DC 0.5 to 4.5 V ratiometric (output 412)

Voltage supply DC 5 V,
Rated voltage supply DC 5 V

DC 0 to 10 V, three-wire (output 415)

Voltage supply DC 11.5 to 30 V,
Rated voltage supply DC 24 V

DC 1 to 5 V, three-wire (output 418)
DC 1 to 6 V, three-wire (output 420)

Voltage supply DC 10 to 30 V,
Rated voltage supply DC 24 V

a

For cable specifications, see installation instructions B 401015.4, chapter 6 "Installation and mounting".

b

The voltage peaks must not exceed or fall below the specified voltage supply values!

U

+

B/S

0V/S-

b

U

B

0V/S­S+

b

U

B

0V/S­S+

b

U

B

0V/S­S+

b

White
Brown

White
Brown
Green

White
Brown
Green

White
Brown
Green

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Connection example

RecorderDisplay

unit

Controller

Level probe

=

+

–

–

– –+ + +

p

Power
supply unit

+ –

+

–

=

~

RecorderDisplay

unit

Controller

Level probe

=

+

–

+ + +– – –

p

Power
supply unit

+ –

S+

=

~

Current output

Voltage output

Page 8/10Data Sheet 401015

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Order details

(1) Basic type

401015 JUMO MAERA S25 – level probe

(2) Basic type extension

000 None

999 Special version

(3) Input

451 0 to 250 mbar relative pressure

452 0 to 400 mbar relative pressure

453 0 to 600 mbar relative pressure

454 0 to 1 bar relative pressure

(4) Output

405 4 to 20 mA, two-wire

412 DC 0.5 to 4.5 V, three-wire

415 DC 0 to 10 V, three-wire

418 DC 1 to 5 V, three-wire

420 DC 1 to 6 V, three-wire

(5) Process connection

567 G 1/4 inside

659 Connection open at the bottom

707 M3 (× 0.5) inside

(6) Process connection material

20 CrNi (stainless steel)

(7) Electrical connection type

11 Attached cable

(8) Protective hose

1 PE protective hose

2 PA protective hose

(9) Cable length of the connecting cable

005 5 m

010 10 m

025 25 m

(10) Extra codes

000 None

691 Improved moisture and vibration protection

Page 9/10Data Sheet 401015

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)

Order code /-------/

Order example 401015 / 000 - 452 - 405 - 707 - 20 - 11 - 1 - 005 / 000

V5.00/EN/00534318

40101500T10Z001K000

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany
Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com

Accessories

Item Description Part no.

Terminal head for pressure compensation The terminal head is only suitable for application in the level probe

Tank cover mounting 00602743

Wall mounting 00602744

variant JUMO MAERA S25 (type 401015).

It is used to mount the level probes cost-effectively and in the best
possible way. Protection type IP 67 is achieved.

By using it locally with the tank mounting or wall mounting versions, a
rapid pressure compensation can be achieved and the length of the
special cable can be minimized. The costs are thereby reduced as an
electric standard cable can be used as the outgoing cable from the ter­minal head.

Furthermore, the direction (for example to the control cabinet) can be
individually specified.

Page 10/10Data Sheet 401015

Scope of delivery

Item Description

Hose end piece With this device, a standard cable is encased in a protective hose suitable for the application. The

hose end piece prevents the hose, which is used as a pressure compensation hose, from being
cut off or bent, for example when being routed through a wall. The hose end piece may be used
for example in routing through walls in masonry, clamp or cutting ring fittings in a tank, or cable
glands in a control cabinet.

The hose end piece is supplied with the device.

V5.00/EN/00534318

40101500T10Z001K000