JUMO dTRANS S08 03, dTRANS S08 04, dTRANS S08 05, dTRANS S08 08, dTRANS S08 09 Operating Manual

Zone 2

ZONE 2

JUMO dTRANS S08 XX

Signal/isolating converter series 6 mm

707203, 707204, 707205, 707208, 707209

Operating Manual

70720300T90Z001K000

V1.00/EN/00698691

2 V1.00/EN/00698691 - 70720300T90Z001K000

Signal/isolating converter series 6 mm

JUMO dTRANS S08 03 / JUMO dTRANS S08 04 /
JUMO dTRANS S08 05 / JUMO dTRANS S08 08 /

JUMO dTRANS S08 09

Table of contents

Warning ................................................................................................ 3

Symbol identification .................................................................................... 3

Safety instructions ...................................................................................... 3

UL installation ....................................................................................... 4

IECEx, ATEX installation in Zone 2 ..................................................................... 4

Flexible supply.......................................................................................... 6

Mounting and demounting of JUMO dTRANS T/S08 ........................................................ 7

Installation on DIN rail / power rail ........................................................................ 8

Supply of power rail ..................................................................................... 8

Marking................................................................................................. 8

Side label ............................................................................................... 9

Applications ............................................................................................ 10

Product overview ....................................................................................... 11

Order................................................................................................... 12

Accessories ............................................................................................. 12

Accessories for power rail devices ........................................................................ 12

Technical data .......................................................................................... 12

Connections ............................................................................................ 15

LED indication........................................................................................... 16

DIP-switch programming................................................................................. 17

JUMO dTRANS S08 04 ................................................................................ 17

JUMO dTRANS S08 05 ................................................................................ 18

JUMO dTRANS S08 09 ................................................................................ 18

V1.00/EN/00698691 - 70720300T90Z001K000 3

Warning

To avoid the risk of electric shock and fire, the safety instructions of this guide must be observed and
the guidelines followed. The specifications must not be exceeded, and the device must only be applied
as described in the following. Prior to the commissioning of the device, this installation guide must be
examined carefully. Only qualified personnel (technicians) should install this device. If the equipment is
used in a manner not specified by the manufacturer, the protection provided by the equipment may be
impaired. Until the device is fixed, do not connect hazardous voltages to the device.

To avoid explosion and serious injury: Modules having mechanical failures must be returned to
JUMO GmbH & Co. KG for repair or replacement.

Repair of the device must be done by JUMO GmbH & Co. KG only.

In applications where hazardous voltage is connected to in-/outputs of the device, sufficient spacing or
isolation from wires, terminals and enclosure - to surroundings (incl. neighboring devices), must be
ensured to maintain protection against electric shock.

Potential electrostatic charging hazard. To avoid the risk of explosion due to electrostatic charging of the
enclosure, do not handle the units unless the area is known to be safe, or appropriate safety measures
are taken to avoid electrostatic discharge.

Symbol identification

Triangle with an exclamation mark: Read the manual before installation and commissioning of the

device in order to avoid incidents that could lead to personal injury or mechanical damage.

The CE mark proves the compliance of the device with the essential requirements of the directives.

Ex devices have been approved acc. to the ATEX directive for use in connection with installations in

explosive areas.

Safety instructions

Receipt and unpacking

Unpack the device without damaging it and check whether the device type corresponds to the one ordered. The packing
should always follow the device until this has been permanently mounted.

Environment

Avoid direct sun light, dust, high temperatures, mechanical vibrations and shock, and rain and heavy moisture. If necessary,
heating in excess of the stated limits for ambient temperatures should be avoided by way of ventilation.
The device can be used for Measurement Category II and Pollution Degree 2.
The device is designed to be safe at least under an altitude up to 2 000 m.

Mounting

Only technicians who are familiar with the technical terms, warnings, and instructions in the manual and who are able to
follow these should connect the device.

GENERAL

CAUTION

HAZARDOUS

VOLTAGE

4 V1.00/EN/00698691 - 70720300T90Z001K000

Should there be any doubt as to the correct handling of the device, please contact your local distributor or, alternatively,

JUMO GmbH & Co. KG

www.jumo.net

Mounting and connection of the device should comply with national legislation for mounting of electric materials, i.e. wire
cross section, protective fuse, and location.

Descriptions of input / output and supply connections are shown in this installation guide and on the side label.

The device is provided with field wiring terminals and shall be supplied from a Power Supply having double / reinforced
insulation. A power switch should be easily accessible and close to the device. The power switch shall be marked as the
disconnecting unit for the device.

JUMO dTRANS T/S08 must be mounted on a DIN rail according to EN 60715.

UL installation

Use 60/75°C copper conducters only.

Wire size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWG 26-12

UL file number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E201387

The device is an Open Type Listed Process Control Equipment. To prevent injury resulting from accessability to live parts the
equipment must be installed in an enclosure.

The power supply unit must comply with NEC Class 2, as described by the National Electrical Code® (ANSI / NFPA 70).

IECEx, ATEX installation in Zone 2

IECEx DEK 18.0006 X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ex nA IIC T4 Gc

DEKRA 18ATEX0007 X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II 3G Ex nA IIC T4 Gc

For safe installation the following must be observed. The device shall only be installed by qualified personnel who are familiar
with the national and international laws, directives and standards that apply to this area.

Year of manufacture can be taken from the first two digits in the serial number.

The devices shall be installed in a suitable enclosure providing a degree of protection of at least IP54 according to EN60529,
taking into account the environmental conditions under which the equipment will be used.

V1.00/EN/00698691 - 70720300T90Z001K000 5

When the temperature under rated conditions exceeds 70°C at the cable or conduit entry point, or 80°C at the branching point
of the conductors, the temperature specification of the selected cable shall be in compliance with the actual measured
temperature.

Provisions shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.

For installation on power rail in Zone 2, only Power rail profile (TN: 00697614) supplied by Power connector unit for dTRANS
T/S08 XX (TN: 00697612) is allowed.

To prevent ignition of the explosive atmospheres, disconnect power before servicing and do not separate connectors when
energised and an explosive gas mixture is present.

Do not mount or remove devices from the power rail when an explosive gas mixture is present.

Cleaning

When disconnected, the device may be cleaned with a cloth moistened with distilled water.

Liability

To the extent the instructions in this manual are not strictly observed, the custom er cannot advance a demand against JUMO
GmbH & Co. KG that would otherwise exist according to the concluded sales agreement.

dTRANS T/S08 PCU

6 V1.00/EN/00698691 - 70720300T90Z001K000

Flexible supply

The technical specifications specifies the maximum required power at nominal operating values, e.g. 24 V supply voltage,
70°C ambient temperature, 600 Ω load, and 20 mA output current.

Protective fuse: 2.5 A.

Power rail solution #1:

Alternately, you can connect 24 VDC to any
one JUMO dTRANS T/S08 device with power
rail connector which will then energize other
units on the rail.

Protective fuse: 2.5 A.

DIN rail solution - device daisy chain:

The units can be supplied with 24 VDC ±30%
via direct wiring and a loop between the
devices.

Power rail solution #2:

The JUMO dTRANS T/S08 PCU power
connector unit allows easy connection of a
24 VDC / 2.5 A source to the power rail.

Protective fuse: 0.4 A.

External fuse characteristics:

The 2.5 A fuse must break after not more than 120 seconds at 6.4 A.

V1.00/EN/00698691 - 70720300T90Z001K000 7

Mounting and demounting of JUMO dTRANS T/S08

Picture 1:

Mounting on DIN rail / power rail.
Click the device onto the rail.

Picture 2:

Demounting from DIN rail / power rail.
First, remember to demount the connectors with hazardous voltages.
Detach the device from the DIN rail by lifting the bottom lock.

Picture 3:

Wire size AWG 26-12 / 0.13 x 2.5 mm

2

stranded wire.

Screw terminal torque 0.5 Nm.

8 V1.00/EN/00698691 - 70720300T90Z001K000

Installation on DIN rail / power rail

The devices in the JUMO dTRANS T/S08 series can be installed on a DIN rail or on a power rail. For marine applications the
devices must be supported by a module stop (TN: 00697615). Power supply units can be mounted on the power rail according
to customer requirements.

If you want to install a JUMO dTRANS T/S08 device with power rail connectors on a standard DIN rail, the head of the screws
holding the 7.5 mm DIN rail shall be no more than 3.5 mm high in order to avoid short circuit between the power rail
connectors on the device and the screws.

Supply of power rail

It is possible to supply the power rail via the supply terminals.
The terminals can pass a current of max. 400 mA.

Marking

The front cover of the JUMO dTRANS T/S08 devices has been
designed with an area for affixation of a click-on marker. The
area assigned to the marker measures 5 x 7.5 mm. Markers
from Weidmüller’s MultiCard System, type MF 5/7.5, are
suitable.

Screwable module
stop for rail profile

< 3.5 mm

> 24 mm

35 mm

V1.00/EN/00698691 - 70720300T90Z001K000 9

Side label

10 V1.00/EN/00698691 - 70720300T90Z001K000

Signal/isolating converter series 6 mm

JUMO dTRANS S08 03 / JUMO dTRANS S08 04 / JUMO dTRANS S08 05 /

JUMO dTRANS S08 08 / JUMO dTRANS S08 09

The product family JUMO dTRANS S08 03, S08 04, S08 05, S08 08 & S08 09 are slimline
isolaters for 24 VDC fixed supply and can be used for different purposes.

• Can be supplied separately or installed on power rail

• Can be delivered with customer parameterisation on request

• Approvals by CE, UL, DNV, GL, ATEX zone 2 and IECEx zone 2

• Possibility of loop supply output

Applications

The JUMO dTRANS S08 isolator family are designed for the automation and process industries. These devices are the result of
extensive development and test procedures making them very well suited for conversion and galvanic isolation in the
following applications:

• Isolation and 1:1 conversion of current signals in the range 0…20 mA.

• Isolation and conversion of standard DC signals.

• Power supply and signal isolator for 2-wire transmitters.

• Isolation and splitting of standard DC signals.

• Installation in ATEX Ex zone 2 / IECEx zone 2.

• Suitable for environments with high vibration stress, e.g. ships

V1.00/EN/00698691 - 70720300T90Z001K000 11

Product overview

Typ e no. JUMO dTRANS S08 03 JUMO dTRANS S08 04 JUMO dTRANS S08 05

Product name Isolated repeater Isolated converter Isolated converter

Description Fixed loop isolator / repeater. Loop isolator / converter for

standard DC signals.

DIP-switch setup.

Loop isolator / converter for

standard DC signals.

DIP-switch setup.

Low cost.

Parameterisation None DIP-switch DIP-switch

Input signal 0…23 mA 0/2…10 V

0/1…5 V

0/4…23 mA

0/2…10 V

0/1…5 V

0/4…23 mA

Loop supply output >17 V @ 20 mA

Output signal (active) 0…23 mA (1:1) 0/2…10 V

0/1…5 V

0/4…23 mA

0/2…10 V

0/1…5 V

0/4…23 mA

Approvals UL, safety,

ATEX zone 2,
IECEx zone 2,

DNV-GL, marine

UL, safety,
ATEX zone 2,
IECEx zone 2,

DNV-GL, marine

UL, safety,

DNV, marine,

GL, marine

Typ e no. JUMO dTRANS S08 08 JUMO dTRANS S08 09

Product name Isolated repeater / splitter Isolated converter / splitter

Description Fixed loop isolator /

repeater with dual output.

Loop isolator / converter for

standard DC signals.

DIP-switch setup.

Dual output.

Parameterisation None DIP-switch

Input signal 0…23 mA 0/2…10 V

0/1…5 V

0/4…23 mA

Loop supply output >17 V @ 20 mA

Output signal (active) 0…23 mA (1:1) 0/2…10 V

0/1…5 V

0/4…23 mA

Approvals UL, safety,

ATEX zone 2,
IECEx zone 2,

DNV-GL, marine

UL, safety,
ATEX zone 2,
IECEx zone 2,

DNV-GL, marine

12 V1.00/EN/00698691 - 70720300T90Z001K000

Accessories

TN: 00697615 = Screwable module stop for rail profile

Accessories for power rail devices

TN: 00697612 = Power connector unit for dTRANS T/S08 XX
TN: 00697614 = Power rail profile (7.5 mm / 750 mm)

Technical data

Environmental conditions:

Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25°C to +70°C

Operating temperature, JUMO dTRANS S08 05 . . . . . . . . . . . . . . . . . . 0 to +70°C

Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C

Calibration temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20...28°C

Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 95% RH (non-cond.)

Protection degree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20

Installation in pollution degree 2 & overvoltage category II.

Mechanical specifications:

Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 x 6.1 x 115 mm

Weight approx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 g

DIN rail type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIN EN 60715 - 35 mm

Wire size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.13...2.5 mm

2

/ AWG 26...12 stranded wire

Screw terminal torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Nm

Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC 60068-2-6

2...25 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1.6 mm

25...100 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±4 g

Order

Type Product name Description Order code

707203 JUMO dTRANS S08 03 Signal isolator (mA) 00697481

707204 JUMO dTRANS S08 04 Signal converter (V, mA)/

supply isolator

00697482

707205 JUMO dTRANS S08 05 Eco signal converter (V, mA) 00697484

707208 JUMO dTRANS S08 08 Signal isolator/splitter (mA) 00697485

707209 JUMO dTRANS S08 09 Signal converter (V, mA)/

supply isolator/splitter

00697486

V1.00/EN/00698691 - 70720300T90Z001K000 13

Common electrical specifications:

Supply voltage, DC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.8...31.2 VDC

Power requirements:

Max. required power is the maximum power needed at power supply terminals or rail connector.
Max. power dissipation is the maximum power dissipated at nominal operating values.

Isolation voltage, test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 kVAC

Isolation voltage working. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 VAC (reinforced) /

250 VAC (Zone 2, Div. 2)

Double isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input / output 1 / output 2 / supply

Signal dynamics, input / output . . . . . . . . . . . . . . . . . . . . . . . . . . . Analog signal chain

Signal / noise ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Min. 60 dB

Cut-o frequency (3 dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 100 Hz

Response time (0...90%, 100...10%):

mA / V input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 7 ms

Accuracy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < ±0.05% of span

Accuracy, JUMO dTRANS S08 05 . . . . . . . . . . . . . . . . . . . . . . . . . . < ±0.2% of span

Temperature coecient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < ±0.01% of span / ˚C

Temperature coecient, JUMO dTRANS S08 05 . . . . . . . . . . . . . . . . . < ±0.015% of span / ˚C

Auxiliary supplies:

2-wire supply (terminal 3 and 4) . . . . . . . . . . . . . . . . . . . . . . . . . . > 17 VDC / 20 mA

Current input:

Measurement range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...23 mA

Programmable measurement ranges . . . . . . . . . . . . . . . . . . . . . . . . 0...20 and 4...20 mA

Input voltage drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 1.5 VDC

Input resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nom. 20 Ω + PTC 50 Ω

Voltage input:

Measurement range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...10.25 VDC

Programmable measurement ranges . . . . . . . . . . . . . . . . . . . . . . . . 0...10 / 2...10 / 0...5 / 1...5 VDC

Input resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥ 500 kΩ

Current output:

Signal range (span) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...23 mA

Programmable signal ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...20 / 4...20 mA

Load, JUMO dTRANS S08 03, S08 04 & S08 05. . . . . . . . . . . . . . . . . . ≤ 600 Ω

Load, JUMO dTRANS S08 08 & S08 09 . . . . . . . . . . . . . . . . . . . . . . . ≤ 300 Ω per channel

Load stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.002% of span / 100 Ω

Current limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 28 mA

Voltage output:

Signal range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...10 VDC

Programmable signal ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0...10 / 2...10 / 0...5 / 1...5 VDC

Load (min.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >10 kΩ

of span = of the selected range

EMC immunity influence . . . . . . . . . . . . . . . . . . . . . . . . . < ±0.5% of span

Extended EMC immunity:

NAMUR NE 21, A criterion, burst . . . . . . . . . . . . . . . . . . . . < ±1% of span

Typ e

Max. power

dissipation

Max. required

power

JUMO dTRANS S08 03 0.60 0.65

JUMO dTRANS S08 04 0.55 1.20

JUMO dTRANS S08 05 0.52 0.80

JUMO dTRANS S08 08 0.48 0.75

JUMO dTRANS S08 09 0.60 1.20

14 V1.00/EN/00698691 - 70720300T90Z001K000

Observed authority requirements:

EMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014/30/EU

LVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014/35/EU

RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011/65/EU

Approvals:

DNV-GL, Ships & Oshore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DNVGL-CG-0339

UL, Standard for Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL 61010-1

Safe Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 61140

I.S. / Ex approvals:

*ATEX 2014/34/EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DEKRA 18ATEX0007 X

*IECEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DEK 18.0006 X

* Does not apply to JUMO dTRANS S08 05

H

I

5

6

7

81

2

3

4

81 82 83 84 85

J

+

-

+

-

mA V

+

-

A

+

-

Tx

C

F

ED

+

-

+

-

V

G

+

-

mA

B

V1.00/EN/00698691 - 70720300T90Z001K000 15

Input

Output

ch. 1

SupplyOutput

ch. 2

Connections

Input signals

JUMO

dTRANS

S08 03

JUMO

dTRANS

S08 04

JUMO

dTRANS

S08 05

JUMO

dTRANS

S08 08

JUMO

dTRANS

S08 09

A

Current x x x x x

B

Tx x x

C

Voltage x x x

Input signals

JUMO

dTRANS

S08 03

JUMO

dTRANS

S08 04

JUMO

dTRANS

S08 05

JUMO

dTRANS

S08 08

JUMO

dTRANS

S08 09

D

Current 1 x x x x x

E

Voltage 1 x x x

F

Current 2 x x

G

Voltage 2 x

Supply

JUMO

dTRANS

S08 03

JUMO

dTRANS

S08 04

JUMO

dTRANS

S08 05

JUMO

dTRANS

S08 08

JUMO

dTRANS

S08 09

H

Supply + x x x x x

I

Supply - x x x x x

J

Power rail connections x x x x x

16 V1.00/EN/00698691 - 70720300T90Z001K000

LED indication

The device is equipped with a green power LED in the front to indicate the operation
status, see the table below.

Condition LED

Output and
loop supply

Action required

No supply / device error OFF De-energized

Connect supply /

replace device

Power-up or restart

1 Flash

(0.5 s OFF + 0.5 s ON)

De-energized -

Device OK

Flashing 13 Hz

(15 ms ON)

Energized -

Incorrect DIP-switch setting

Flashing 1 Hz

(15 ms ON)

De-energized

Correct setting and

re-power device

Restarting due to:
Supply error/hardware.
RAM or program flow error

Flashing 1 Hz

(0.5 s ON)

De-energized

Adjust supply /

replace device

1 2 3 4 5 6 7 8 9 10

0…20 mA OFF OFF OFF OFF 0…20 mA OFF OFF OFF NA NA NA

4…20 mA OFF OFF ON OFF 4…20 mA OFF ON OFF NA NA NA

0…10 V OFF ON OFF OFF 0…10 V ON OFF OFF NA NA NA

2…10 V OFF ON ON OFF 2…10 V ON ON OFF NA NA NA

0…5 V OFF ON OFF ON 0…5 V ON OFF ON NA NA NA

1…5 V OFF ON ON ON 1…5 V ON ON ON NA NA NA

0...20 mA Tx ON OFF OFF OFF

4...20 mA Tx ON OFF ON OFF

V1.00/EN/00698691 - 70720300T90Z001K000 17

DIP-switch programming

The devices JUMO dTRANS S08 04, S08 05 and S08 09 can be configured via DIP-switches. The DIP-switches are located on
the side of the device and can be adjusted with a small screwdriver or other implement.

Adjustment of DIP-switches.
Default factory settings are:
Input = 0…20 mA
Output = 0…20 mA
All DIP-switches in the OFF position

The tables below show the configuration based on DIP-switch settings.
NA = no function of DIP-switch.

JUMO dTRANS S08 04

Input setup Output setup

1 2 3 4 5 6 7 8 9 10

0…20 mA NA OFF OFF OFF 0…20 mA OFF OFF OFF NA NA NA

4…20 mA NA OFF ON OFF 4…20 mA OFF ON OFF NA NA NA

0…10 V NA ON OFF OFF 0…10 V ON OFF OFF NA NA NA

2…10 V NA ON ON OFF 2…10 V ON ON OFF NA NA NA

0…5 V NA ON OFF ON 0…5 V ON OFF ON NA NA NA

1…5 V NA ON ON ON 1…5 V ON ON ON NA NA NA

1 2 3 4 5 6 7 8 9 10

0…20 mA OFF OFF OFF OFF 0…20 mA OFF OFF OFF OFF OFF OFF

4…20 mA OFF OFF ON OFF 4…20 mA OFF ON OFF OFF ON OFF

0…10 V OFF ON OFF OFF 0…10 V ON OFF OFF ON OFF OFF

2…10 V OFF ON ON OFF 2…10 V ON ON OFF ON ON OFF

0…5 V OFF ON OFF ON 0…5 V ON OFF ON ON OFF ON

1…5 V OFF ON ON ON 1…5 V ON ON ON ON ON ON

0...20 mA Tx ON OFF OFF OFF

4...20 mA Tx ON OFF ON OFF

18 V1.00/EN/00698691 - 70720300T90Z001K000

JUMO dTRANS S08 05

Input setup Output setup

JUMO dTRANS S08 09

Input setup Output setup

Channel 1 Channel 2

JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.

Street address:
Moritz-Juchheim-Straße 1
36039 Fulda, Germany
Delivery address:
Mackenrodtstraße 14
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.net

JUMO House
Temple Bank, Riverway
Harlow, Essex, CM20 2DY, UK
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumo.co.uk

6733 Myers Road
East Syracuse, NY 13057, USA

Phone: [phone]
Fax: [phone]
Email: [e-mail]
Internet: www.jumousa.com