JUKI MEB-3200 Instruction Manual

Explanation of the pictorial indications

Represents the action that is
"prohibited"

Represents the "instruction" that has to
be carried out without exceptions

DANGER: Never carry out operations described below. If you do any of the following operations, human

body including hands, fingers or arms can be caught in the machine, resulting in serious injuries such
as finger severing in the worst case.

Never lift up the sewing machine alone if it is

too heavy for you.

Do not support the sewing machine by hand

without having locked the hinge stopper.

In this state, the gas spring has outgassed
resulting in functional decline. Replace the gas
spring with a new one immediately.

Be sure to lift up the sewing machine until the
hinge stopper is locked at the threading
position to secure the sewing machine

.

Never raise/lower the sewing machine by two or
more workers.

Never hold the side face of the bed when

raising/lowering the sewing machine.

If raising/lowering the sewing machine by two or
more workers, the risk that the workers' bodies
such as a hand, finger or arm are caught in the
machine will increase. If the sewing machine is too
heavy for one worker to carry out the work alone,
the gas spring should be replaced with a new one
to restore the gas spring to the normal state.

Be sure to
hold the
near side
rib at the
periphery
of the bed.

No.00

40098365

Be sure to read these instructions

Hinge stopper in
unlocked state

Rib at the
periphery of
the bed

Threading

position

Hinge

stopper

Locking direction

MEB-3200

Precautions to protect against accidents
resulting in personal injury or death

The gas spring which is a safety device to help reduce the sewing machine weight can lose its function by inappropriate
maintenance work, etc.
In the case the gas spring does not function properly, the raised machine can drop by carrying out threading of the machine with
looper thread, or adding of oil to the oil tank, inviting a risk of accidents resulting in personal injury or death.
To protect against such accidents, be sure to read this "Precautions to protect against accidents resulting in personal injury or
death" carefully. In addition, be sure to stop using the sewing machine if the gas spring does not function properly and replace
the gas spring with a new one immediately.

Never thread the sewing machine with the hinge

stopper placed at its intermediate position.

Never use the sewing machine with the gas
spring removed.

* At its intermediate position, the hinge stopper works as the

sewing-machine drop preventive stopper. So, the machine
should not be threaded with the hinge stopper placed at its
intermediate position.

Be sure to lift up the sewing machine until the
hinge stopper is locked at the threading position
to secure the sewing machine

.

Be sure to check the function of the gas spring
periodically. If any functional decline of the gas
spring is detected, be sure to replace it with a
normal one before using the sewing machine.

WARNING: Be sure to observe the following instructions in order to prevent trapping accidents

caused by functionally-declined gas spring which can result in serious personal injury to hands,

fingers or arms.

Do not damage the gas spring with a tool or part.

* Even slight damage on the gas spring can cause gas

leakage, making the gas spring nonfunctional.

Do not return the sewing machine to its home
position with a tool or part placed inside the

bottom cover.

* Any tool or part remaining in the bottom cover can damage

the gas spring to cause gas leakage.

Be sure to make sure that there is no tool or
part inside the bottom cover before returning
the sewing machine to its home position.

Whenever you find that the gas spring does not
move or function normally, replace the gas

spring with a new one.

● Refer to the "CAUTIONS REGARDING THE GAS
SPRING OF MEB-3200" supplied with the unit for the
reference time of replacement and the replacement
procedure of the gas spring.

● To replace the gas spring, be sure to order JUKI's
genuine gas spring.

Never use any gas spring other than JUKI's
genuine one.

DANGER: Never carry out operations described below. If you do any of the following operations, human

body including hands, fingers or arms can be caught in the machine, resulting in serious injuries such as

finger severing in the worst case.

When you feel that

the sewing machine

is heavier than

usual and does not

move smoothly as if

it is caught on

something.

Hinge

stopper

Threading

position

Locking direction

INDUSTRIAL SEWING MACHINE DIVISION

Copyright ⓒ 2010 JUKI CORPORATION

All rights reserved throughout the world.

＊

The description covered in this precautions to protect against
accidents resulting in personal injury or death is subject to
change for improvement of the commodity without notice.

Intermediate

position

10・04 Printed in Japan