JUKI APPAREL User Manual

Download

Page 1

APPAREL

General Catalog

SEWING MACHINERY & SYSTEMS BUSINESS UNIT

2-11-1, TSURUMAKI, TAMA-SHI, TOKYO 206-8551, JAPAN PHONE: (81) 42-357-2370 FAX: (81) 42-357-2274

https://www.juki.co.jp/en

2022

Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalogue prints with environment-friendly soyink on recycle paper. Paper from responsible sources FSC™ C001712

FEBRUARY, 2022 Printed in Japan(TN)

Registered Organization:

The Scope of the Registration: The activities of research, development, design, sales, distribution, and maintenance services of industrial sewing machines, household sewing machines and industrial robots, etc., including sales and maintenance services of data entry systems.

Head Office

Page 2

Let’s start

a SMART FACTORY

with JUKI!

Sewing factories all over the world are seriously short of labor.

The key, in planning for future growth, is to steadily improve

productivity even as the labor force dwindles. Simply put,

the productivity per worker must get better than ever.

In JUKI’s SMART FACTORY, advanced sewing machines,

Visualized Connected

IoT technology, and years of experience in sewing factory

efficiency come together to improve the productivity of every

single worker.

JUKI’s proposal for a SMART FACTORY

The combination of various automated facilities and digitalized general-purpose sewing machines improve

operation availability. Production time, which used to be manpower-dependent, is much reduced as a

result. Production efficiency, meanwhile, is maximized by visualizing data on operation availability through

networked production facilities.

NETWORKING

Visualize machine

operation availability

AUTOMATIZATION SHOP IMPROVEMENTS

Better productivity,

Better quality,

Lower labor costs

DIGITALIZATION

Much less downtime,

No more dependence

on worker skills

Consulting service

based on data

Take the 1st stepTake the 1st stepTake the 1st step forward together with JUKI!forward together with JUKI!forward together with JUKI!

Page 3

Inspire the Knowledge in Sewing Adjustment

Epoch-making Sewing Systems in history

Digitalization of sewing machines redefines the traditional reliance of skilled

and experienced veterans in the sewing factory.

Realization of digitalization and IoT technology also introduces

new possibilities to the improvement of bottleneck quality,

reproduction of optimum tension controls,

and optimize time required for setup and maintenance processes.

LINE UP

Creation of exquisite seam

Digitalization of feeding locus※1, needle thread tension etc. with JUKI developed innovative technology.

With numerical representation of sewing variables, parameter adjustments are made simplified

while improvising efficiency and quality.

Reproduction of sewing with I oT

While sewing adjustment data are stored within the machine, the information can be extracted by using

※2

an Android terminal

from previous adjustments], [Wish to allow other machine to exact the same sewing quality as each other].

or USB device. Realizes requests such as [Wanting to reproduce seam quality

Visualization of production activities

Digitalization is not limited for adjustments of parameter data. JUKI Smart APP※3 allows users to view

the output and operation ratio etc. of individual machines in graph format. Promoting analysis and

problem solving based on the actual conditions.

Direct-drive, High-speed, Lockstitch Sewing System

with automatic thread trimmer

DDL-9000C

Computer-controlled, High-speed,

Bartacking Sewing System

LK-1900BN

Computer-controlled, High-speed,

Lockstitch, Button Sewing System

LK-1903BN

Digital Zigzag Stitching Sewing System

Semi-Dry head,

LZ-2290C

Computer-controlled, High-speed,

Buttonholing Sewing System

LBH-1790AN

2-needleLockstitchSewingSystem

Semi-dryhead,

LH-4500C

High-speed, Feed-off-the-arm,

3-needle Double Chainstitch Sewing System

(Digital workstation )

MS-1261A/DWS

※1 DDL-9000C, LZ-2290C ※2 The sewing machine can be paired with equipment which supports NFC (Near Field Communication ) only by holding the equipment over the sewing machine. ※3 Android OS Version 6.0 is recommended to use JUKI Smart APP. (Operation is confirmed with respect to Versions 5.0 and later.)

Contact JUKI distributor in your area for how to use the application software.

Computer-controlled,

Eyelet Buttonholing Sewing System

(Trimmer for Needle and Looper Thread with gimp)

MEB-3200C

Computer-controlled,

Eyelet Buttonholing Sewing System

MEB-3900

Computer-controlled Cycle Machine

with Input Function

AMS-221F

Page 4

CONTENTSPictographs for Function

Catalog of each model is also available. For further details, please refer to each catalog.

Needle

2-needle

Organized split needle bar

3-needle

4-needle

Hook

Horizontal-axis hook (large)

Horizontal-axis hook (3 fold-capacity)

Vertical-axis hook (large)

Feed

Bottom-feed

Needle-feed

Bottom and variable top-feed

Differential-feed

Variable top-feed

Belt-feed

X-Y drive

R- drive

Stitch system

Lockstitch

Double chainstitch

Single-thread chainstitch

Pinpoint stitch

Stitch shape

Zigzag stitching

Lockstitch buttonholing

Eyelet buttonholing

Bartacking

Shorter-thread remaining functions

Button sewing

Button sewing with neck wrapping

Belt-loop attaching

Pocket welting

Function

Active tension

Automatic thread trimmer

Cloth puller

Cloth cutting knife

Stacker

Dry-head, Intelligent Direct-drive Sewing Machine

Digitally Smart Solution

sti/ min is the abbreviation for “stitches per minute”

＊

1-needle, Lockstitch Machine

DDL-9000C

DDL-9000C-FMS/PBN

DDL-900C <EFLeCS>

DDL-8000A

DDL-7000A

DDL-8700-7, 8700

DDL-5600N-7, 5600N

DDL-5550N-7, 5550N

DLU-5494N-7/ IT-100A

DLU-5490N-7, 5490N

DLN-9010A

DLN-5410NDD-7

DLN-5410N-7, 5410N

DLN-6390-7, 6390

DLM-5400NDD-7, DMN-5420NDD-7

DLM-5400N-7, 5200N

DMN-5420N-7

DLD-5430N-7, 5430N

2-needle, Lockstitch Machine

LH-4578C-7, 4578C, 4588C-7

LH-3528A-7, 3528A, 3578A-7, 3578A

LH-3568A-7, 3568A, 3588A-7, 3588A

Overlock / Safety Stitch Machine

MO-6700DA Series

MO-6800S/DD10, 22, 23 Series, MO-6800D/DD10, 22, 23 Series

MO-6800D Series

MO-6800S Series

MO-6900S Series

MO-6900R Series

MO-6900J Series, 6900G Series

MO-6900C Series

MO-6914C-BD6-307/X81028

Zigzag Stitching Machine

LZ-2290C-7, 2290C

LZ-2280A

LZ-2284A-7, 2284A

LZ-2287A

LZ-2282N-7, 2282N

LZ-2285N

LZ-2284NU-7, 2284NU, 2280NU

LZ-2284C-7

LZ-271, 391N

Post-bed Sewing Machine

DP-2100

LT-591

Coverstitch Machine

MF-7500-U11(/UT), MF-7500D-U11(/UT)

MF-7500-C11, MF-7500D-C11

MF-7500-E11, MF-7500D-E11

MF-7912DRH24, MF-7913DRH24

MF-7900-U11(/UT), MF-7900D-U11(/UT)

MF-7900-H11(/UT), MF-7900D-H11/UT

MF-7900-H22, 23(/UT), MF-7900D-H22, 23(/UT)

MF-7900D-H24/UT, H25/UT

MF-7900-E11(/UT), MF-7900D-E11(/UT)

MF-7900-E22(/UT), E23(/UT)

MF-7200D-U10, K10

MF-3620

Chainstitch Machine

MH-481-5, 481, 484-5, 484, 486-5

MH-380, 382

MS-3580

MS-1261A/DWS

MS-1190, MS-1261

MP-200N

ML-111U

Button Sewing Machine

LK-1903BNB, 1903BN, 1903BN/ BR35

LK-1903S

MB-1800A /BR10, 1800B, 1800S

MB-1377, 1373

Buttonholing Machine

LBH-1790ANB, 1790AN, 1795AN, 1796AN

LBH-1790S

LBH-780

MEB-3200C

MEB-3900

Bartacking Machine

LK-1900BNB, 1900BN, 1901BN, 1902BN

LK-1900BNSS000/X75024

LK-1900S, LK-1900SSS000/X75023

20 21

Shape-tacking Machine

15 16

LK-1910, 1920

Computer-controlled Cycle Machine

AMS-221F-2516, 3020

AMS-210EN-1306, 1510, 2210, AMS-221EN-2516, 3020

AMS-210EN-1306/7450

AMS-210ENHL-2210/X90003

AMS-221ENHS-3020

AMS-221ENHS-3020/X90014, X90026

AMS-221ENHS-3020/X90005, X90006

AMS-221ENTS-3020/X90002, 90004

AMS-221ENHS-3020/7200

AMS-221ENTS-3020/X90013

AMS-224EN-4530, 6030

AW-3S

Automatic Machine

APW-895NS, 895NL, 896NS

APW-895NE

AP-876, 874

AB-1351

MOL-254

AMB-289

AC-172N-1790AN

ASN-690

AE-200ANLA, AE-200ANLD

PS-800-13085, 12080, 8045, 6045

PS-800SB-8045CKZ/X88011

PS-700

30 31 32

35 36

Software / System

PM-1

JaNets JT Simple

JUKI-ShuHaRi

JUKI e-learning

40 41

Option Parts

Plastic Bobbin

Ti-Mo-N Coating Looper

Bird-Nest Prevention Device for DDL lockstich machine

DDL-9000C Series Optional Items

LK-1900 Shorter Thread remaining Kit

LK-1900 Instant Button Sewing Clamp Kit

46 47

Page 5

1-needle, Lockstitch Machine

Direct-drive, High-speed, 1-needle,

Lockstitch Sewing System with Automatic Thread Trimmer

DDL-9000CDDL-9000C

Premium Digital

JUKI has digitalized the drive mechanism of the sewing machine which

determines the “seam” quality, JUKI launches the new “direct-drive,

high-speed, lockstitch sewing system with automatic thread trimmer”

DDL-9000CF. This is the newest flagship lockstitch machine. Digitalized

vertically- and horizontally-driven feed mechanism allows easy adjustment of

settings such as the feed locus only on the operation panel according to the

material to be sewn. Thanks to the digitalization, Optimum adjustment values

required to produce high-quality seams can be stored, on a material-by-mate-

rial basis, in memory and can be reproduced with ease. For sewing plants

which produce diversified products using diversified materials, this feature is

quite helpful to achieve stable seam quality.

Digital

Management, browsing and editing of data can be carried out

on the application software

A “Two-way” contactless communication for parameter adjustment data can

be conducted with the sewing machine by a commercial Android terminal.

This feature allows sewing machines in a sewing line to be uniformly set and

status checked quickly, thereby contributing to stabilization in product quality.

Control panel is standardized with USB ports, promising simplicity in data

management and system updates.

*Android OS Version 6.0 is recommended to use JUKI Smart APP. (Operation is confirmed with respect to Versions 5.0 and later. ) Contact JUKI distributor in your area for how to use the application software.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

DDL-9000C

Direct-drive, High-speed, 1-needle, Lockstitch Machine with Automatic Thead Trimmer (Electric Feed Length Control System <EFLeCS>)

DDL-900CDDL-900C

JUKI’s first high-speed lockstitch machine with Electric Feed Length

Control System (EFLeCS). The direct-drive motor, control box, and

color LCD touch panel of this sewing machine are now combined with

the Electric Feed Length Control System (EFLeCS) – all integrated in

the main body.

Model name

Application

Lubrication

Max. sewing speed

Max. stitch length

Lift of the presser foot

Needle

DDL-900CS-M

Medium weight

DDL900CS-H

Heavy weight

Oil Shielding System

5,000sti/min

5mm

Automatic: 9mm / Lever: 13mm

DB×1 #14

4,000sti/min

DP×5 #21

Direct-drive, High-speed, 1-needle, Lockstitch Machine with Automatic Thread Trimmer

DDL-8000ADDL-8000A

The DDL-8000A Series maintains JUKI’s established seam quality

and is provided with narrowed-down essential and simplified

functions. It helps improve the work efficiency through operator

assistance with its audio guidance.

DDL-900CSMNBK

Model name

Type

Application

Lubrication

Max. sewing speed

Max. stitch length

Needle*

Lift of the presser foot

*1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 - 5.00 mm: 4,000 sti/min *2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 - 5.00mm: 4,000sti/min *3 Differs on a destination-by-destination basis

Fully-dry head type

4,000sti/min

By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm (*0.1〜8.5mm), 2nd stage 8.5 mm (*8.5mm〜13.5mm)

Premium Digital Type

Medium-weight

DB×1・DP×5（#11）

#9〜18（Nm65〜110）

DDL-9000C-FMSDDL-9000C-FDS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH

Premium Digital

Heavy-weight

Semi-dry

5,000sti/min*

Minute-quantity lubrication

DB×1・DP×5（#21）

#20〜23（Nm125〜160）

4,500sti/min*

5mm

Semi-dry head, Direct-drive, High-speed, 1-needle, Lockstitch Sewing System

with Automatic Thread Trimmer (Bird’s nest prevention type)

DDL-9000C-FMS/PBN

DDL-9000C/PBN digitalizes the machine adjustment used to be handled

based on personal hunches and experience. The machine comes with bird’s

nest prevention that commits to “seam quality”. The newly-developed model

totally eliminates bird's nests at the starting of sewing, which have been a

conventionally inevitable factor when using machines with a thread trimmer.

The length of thread remaining at the end of sewing is shortened.

The machine eliminates the “bird’s nest” at the starting of sewing.

Only 3 mm long thread is left on the material at the end of sewing.

Premium Digital

Digital Type

Medium-weight

Semi-dry

5,000sti/min*

DB×1・DP×5（#11）

#9〜18（Nm65〜110）

Digital

Heavy-weight

Minute-quantity lubrication

4,500sti/min*

DB×1・DP×5（#21）

#20〜23（Nm125〜160）

*Adjustable on the operation panel

Voice guidance for assisting the operator

Speaker

(newly-developed LCD panel)

This sewing machine is provided as standard with the voice guidance with clock function.

Model name

Specification

Application

Lubrication

Max. sewing speed

Max. stitch length

Lift of the presser foot

Needle

＊When the optional long pitch kit is installed: 7mm (normal feed), 5mm (reverse feed)

DDL-8000AS-MS DDL-8000AS-SH DDL-8000AB-MS DDL-8000AB-SH DDL-8000AB-SJ

Standard type Shorter-thread remaining type

Medium-weight

Semi-dry

5,000sti/min

DB×1 (#11 ) #9~18

(134Nm65~110)

Heavy-weight

Minute-quantity lubrication

5mm 5mm

By hand: 5.5mm, Auto: 1st stage 8.5mm, 2nd stage 13mm, By knee: 15mm

DB×1 (#21 ) #20~23

(134Nm125~160)

DDL-8000AS-SJ

Jeans・Heavy-weight

4,500sti/min

DP×5 (#21) #20~23

(134Nm125~160)

5mm (7mm)*

DB×1 (#11 ) #9~18

Direct-drive, 1-needle, Lockstitch Machine with Automatic Thread Trimmer

DDL-7000ADDL-7000A

The thread take-up lever which provides a wider sewing range is

adopted. Needle bar stroke is 35 mm, with this feature, the sewing

machine is able to sew many different types of materials ranging from

light-weight ones to medium-weight denim.

Medium-weight

Semi-dry

5,000sti/min

(134Nm65~110)

Heavy-weight

Minute-quantity lubrication

4,500sti/min

DB×1 (#21 ) #20~23

(134Nm125~160)

DDL-8000A

Jeans・Heavy-weight

5mm (7mm)*

DP×5 (#21) #20~23

(134Nm125~160)

Model name

Type

Application

Lubrication

Max. sewing speed

Max. stitch length

Needle

Lift of the presser foot

2nd stage 8.5 mm (*8.5mm〜13.5mm)

DDL-9000C-FMS/PBN

Premium Digital Type

Medium-weight

Semi-dry

4,000sti/min

DB×1, DP×5 (Standard #11) #9〜18 (Nm65〜110)

Auto : 1st stage 5.0 mm (*0.1〜8.5mm),

Premium Digital

4mm

※Adjustable on the operation panel

DDL-9000C-FMS/PBN

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

DDL-7000AS-7

Light to medium weight

5,000sti/min

5mm

By hand: 5.5mm, By knee: 13mm

DB × 1 (#14) #14~#18

DDL-7000AH-7

Heavy weight

4,000sti/min

DP × 5 (#21) #20〜#23

DDL-7000A

0201

Page 6

1-needle, Lockstitch Machine 1-needle, Lockstitch Machine

1-needle, Lockstitch Machine

DDL-8700-7 DDL-8700

By thoroughly investigating and modifying the sewing mecha-

nisms in order to achieve low-tension sewing, the machine flexibly

responds to various kinds of materials and produces beautiful

seams of consistent quality.

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

DDL-8700-7 DDL-8700

Medium-weight

5,000

sti/min

4mm 5mm

By knee: 13mm

DB×1 (#14) #9〜#18,

134 (Nm90)

DDL-8700A-7, 8700A

Light-weight

4,000

4mm 5mm

By knee: 9mm By knee: 13mm

DA×1 (#9) #9〜#11,

134 (Nm65)

5,500sti/min

DDL-8700H-7, 8700H

Heavy-weight

sti/min

DB×1 (#21) #19〜#23,

134 (Nm130)

1-needle, Lockstitch Machine with Double-capacity Hook

DDL-5600N-7 DDL-5600N

The machine is capable of making well-tensed, beautifully

finished seams, regardless of the type of heavy materials.

DDL-8700-7

1-needle, Bottom and Variable Top-feed, Lockstitch Machine

DLU-5494N-7/ IT-100A

With its microcomputer control, the machine achieves high-quality

shirring with consistency. The machine enables even inexperienced

operators to perform shirring operation smoothly and easily.

Model name

Max. sewing speed

Max. stitch length

Max. top-feed amount

Presser foot

Needle

DLU-5494N-7/IT-100A

5mm (forward), 3mm (backward)

8mm (top feed amount varies

depending on the type of gauge)

＊When using auto-lifter AK85: 9mm

DB×1 (#14), 134 (Nm90)

(with program shirring control device)

4,000sti/min

By knee: 13mm

1-needle, Bottom and Variable Top-feed, Lockstitch Machine

DLU-5490N-7 DLU-5490N

With its bottom and variable top-feed mechanism, the machine

widely adapts to diversified applications and helps promote the

production of upgraded-quality products while increasing efficiency.

DLU-5494N-7/IT-100A

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

DDL-5600NJ-7, 5600NJ DDL-5600NL-7, 5600NL

Jeans

4,000

sti/min

5mm

By knee: 13mm

DB×1 (#21) #20〜#23, 134 (Nm130)

Heavy-weight

3,000

sti/min

8mm

1-needle, Lockstitch Machine

DDL-5550N-7 DDL-5550N

The thread take-up mechanism, feed mechanism, thread paths

and hook have been further improved to enhance responsiveness

to material changes and to ensure consistent stitch quality.

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

DDL-5550N-7 DDL-5550N

Medium-weight

5,000

sti/min 5,500sti/min

4mm

By knee: 13mm

DB×1 (#14), 134 (Nm75) DB×1 (#14), 134 (Nm90)

DDL-5550NA-7, 5550NA

Light-weight

4,000

sti/min

4mm

By knee: 9mm

DA×1 (#9), 134 (Nm65)

DB×1 (#21), 134 (Nm130)

5mm

DDL-5550NH-7, 5550NH

Heavy-weight

5mm

By knee: 13mm

DDL-5600N-7

DDL-5550N-7

Model name

Max. sewing speed

Max. stitch length

Max. top-feed amount

Presser foot

Needle

DLU-5490N-7, 5490N

4,500sti/min

5mm

8mm

By knee: 13mm

DB×1 (#14), 134 (Nm75)

Direct-drive, High-speed, Needle-feed, Lockstitch Machine

DLN-9010A

The needle feed mechanism, which is widely recognized as offering outstanding efficiency of feed and effectively preventing uneven material feed, responds to a wide range of applications such as the sewing of outerwear, runstitching of men’s shirts, etc. and the attaching of various parts to garment bodies.

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

The max. sewing speed should be set at 4,000sti/min or less when the machine is used with a stitch length of more than 3.5mm.

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

By knee: 15mm (max.), Auto: 10mm

DB×1 (#14) #9〜#18, 134 (Nm90) Nm65〜Nm110

By knee: 15mm (max.), Auto: 10mm

DB×1 (#21) #20〜#23, 134 (Nm130) Nm120〜Nm160

DLN-9010A-SS

Light- to medium-weight

5,000sti/min

4.5mm

DLN-9010A-SH

Heavy-weight

4,000sti/min

4.5mm

DLU-5490N-7

DLN-9010A

0403

Page 7

1-needle, Lockstitch Machine

Direct-drive, 1-needle, Needle-feed, Lockstitch Machine with Automatic Thread Trimmer

DLN-5410NDD-7

Energy-saving servomotor is installed in the direct-drive style.

The control panel which belongs equivalently to the highly-func-

tional CP-180 family is built into the control box. With this panel,

various sewing data ranging from the sewing speed to the

production support functions can be adjusted.

Model name

Application

Max. sewing speed

Max. stitch length

Lift of the presser foot

Needle

DLN-5410NDD-7

medium weight

Light to

5,000sti/min

4mm

DB× 1 (#14)

#9~#18

Heavy weight

By hand: 5.5mm, By knee: 13mm

DB×1 (#21 ) #20~# 23

DLN-5410NDDJ-7DLN-5410NDDH-7

Jeans

4,000 ti/min

4.5mm

1-needle, Needle-feed, Lockstitch Machine

DLN-5410N-7 DLN-5410N

The machine produces seams with accurate stitch length and

prevents slippage of the upper fabric. The machine ensures

beautiful seam quality free from stitch gathering, even when a

hard-to-feed material is used.

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

Model name

Application

Max. sewing speed

Max. stitch length

Presser foot

Needle

DLN-5410N-7, 5410N

Light- to medium-weight

5,000sti/min

4mm

DB×1 (#14), 134 (Nm90)

DLN-5410NJ-7

Jeans

sti/min

4,000

4.5mm

DLN-5410NH-7, 5410NH

Medium- to heavy-weight

By knee: 13mm

DB×1 (#21), 134 (Nm130)

(long stitch length type)

By knee: 13mm

DB×1 (#21), 134 (Nm130)DB×1 (#21), 134 (Nm130)

4,000sti/min

4.5mm

DLN-5410NL

Heavy-weight

3,000

sti/min

6mm

High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook

DLN-6390-7 DLN-6390

The cylinder-bed lockstitch machine with a thread trimmer is

designed for hemming the bottom of jeans, casual pants and work

uniforms. The top-and bottom-roller style feed mechanism forms

seams with increased consistency to achieve improved hemming

quality while reducing uneven hems.

DLN-5410NDD-7

DLN-5410N-7

Direct-drive, 1-needle,

Lockstitch Machine with Vertical Edge Trimmer and Automatic Thread Trimmer

DLM-5400NDD-7 DMN-5420NDD-7

With its highly operable knife mechanism, the machine helps

promote the production of upgraded-quality products while

increasing efficiency.

The control panel which belongs equivalently to the highly-func-

tional CP-180 family is built into the control box. With this panel,

various sewing data ranging from the sewing speed to the

production support functions can be adjusted.

Model name

Max. sewing speed

Feed system

Lift of the presser foot

Needle

Max. thickness

of the material to be cut

DLM-5400NDD-7

4,500 sti/min

(Bottom-feed)

(Needle-feed)

DMN-5420NDD-7

5,000 sti/min

4mm

Needle-feed

#18

〜

Bottom-feed

By hand: 5.5mm, By knee: 13mm

DB × 1 ( #14) #9

1-needle, Lockstitch Machine with Vertical Edge Trimmer

DLM-5400N-7

(Bottom-feed)

DLM-5200N

The knife is sharp enough to cut any type of mamaterial. The

one-touch utility knife lever enhances the comfort of operation.

Model name

Max. sewing speed

Max. stitch length

Presser foot

Needle

Max. thickness of the material to be cut

Model name

Max. sewing speed

Max. stitch length

Presser foot

Needle

Max. thickness of the material to be cut

DLM-5400N-7

4,500sti/min

4mm

By knee: 10mm

DB×1 (#14) #9〜#18, 134 (Nm90)

4mm

DLM-5200N

4,500

sti/min

5mm

By knee: 10mm

DB×1 (#14), 134 (Nm90)

4mm

1-needle, Needle-feed, Lockstitch Machine with Vertical Edge Trimmer

DMN-5420N-7

The machine is a needle-feed type.

The knife is sharp enough to cut any type of material.

DLM-5400NDD-7

DLM-5400N-7

Model name

Max. sewing speed

Stitch length

(utilized by changing pitch conversion gears)

Presser foot

Binder open / close type

Cylinder-bed diameter

Needle

Driven by air cylinder

DLN-6390-7

5,000sti/min

Standard gears: 3.2mm (2.8mm) /

Supplied gears: 2.3mm, 3.6mm /

Optional gears: 2.1mm, 2.5mm, 4.2mm

Max. 14mm

180mm

UY180GVS Nm140 range of use:

Nm90〜Nm150 (equivalent to #14〜#22.5)

DLN-6390

Manual type

DLN-6390-7

Model name

Max. sewing speed

Max. stitch length

Presser foot

Needle

Max. thickness of the material to be cut

DMN-5420N-7

5,000sti/min

5mm

By knee: 10mm

DB×1 (#14) #9~#18, 134 (Nm90)

4mm

DMN-5420N-7

05 06

Page 8

1-needle, Lockstitch Machine

2-needle, Lockstitch Machine

1-needle, Differential-feed, Lockstitch Machine

DLD-5430N-7 DLD-5430N

With its highly reliable bottom-differential-feed mechanism,

the machine promotes the production of upgraded-quality

products while increasing efficiency.

Model name

Max. sewing speed

Max. stitch length

Max. top-feed amount

Needle bar stroke

Presser foot

Needle

This ratio applies provided that the stitch length does not exceed 2.5mm.

Shirring 1:1.5 (max. 1:3

DLD-5430N-7, 5430N

4,500

sti/min

5mm

), Stretching 1:0.5

30.7mm

By knee: 13mm

DB×1 (#14), 134 (Nm90)

2-needle, Lockstitch Machine

Semi-dry head, 2-needle Lockstitch Sewing System

LH-4578C-7 LH-4578C LH-4588C-7

Seam quality is improved by introducing the separately-driven

right and left active tension mechanisms.

A large hook of 1.8-fold capacity (as compared with the standard

size hook) is adopted. As a result, frequency of thread changing

is reduced in half. This is the world's first sewing machine not

only for jeans and heavy-weight materials but also for foundation

materials, medium-weight materials that is provided with a large

hook. This sewing machine provides further stable seam quality.

The corner stitching capability is provided only on the

LH-4588C-7. Changeover from the normal stitching to the corner

stitching is carried out semi-automat-

ically using the lever while ensuring

ease of operation. This means that

even the inexperienced operator can

produce consistent seam quality

while improving productivity.

Management, browsing and editing of data can be carried out on the application software

A “Two-way” contactless communication for parameter adjustment data can be conducted with

the sewing machine by a commercial Android terminal. This feature allows sewing machines in a

sewing line to be uniformly set and status checked quickly, thereby contributing to stabilization in

product quality. Control panel is standardized with USB ports, promising simplicity in data

management and system updates.

*Android OS Version 6.0 is recommended to use JUKI Smart APP. (Operation is confirmed with respect to Versions 5.0 and later.) Contact JUKI distributor in your area for how to use the application software.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

DLD-5430N-7

LH-4588C-7

Semi-dry head, 2-needle, Lockstitch Machine

LH-3528A-7 LH-3528A LH-3578A-7

(with large hooks)

LH-3578A

(with large hooks)

This is the cutting-edge model 2-needle sewing machine

which comes with substantially enhanced mechanisms

such as the direct-drive mechanism, semi-dry head, new

thread tension control mechanism and improved oiling

system. All models of the LH-3500A Series are provided

with a semi-dry head to eliminate staining with oil from

the frame (the needle bar part).

*A thread tension control mechanism has been

developed for each type of sewing machine in order to

achieve the best-suited thread tension for its purpose.

*Two selectable new-method oiling mechanisms.

Model name LH-3528ALH-3528A-7

Application

Max. sewing speed

Max. stitch length

Needle gauge

Presser foot

Needle

Semi-dry head, 2-needle, Lockstitch Machine with Organized Split Needle Bar

A: Light-weight, F: Foundation, S: Medium-weight, G: Jeans and heavy-weight

3,000sti/min

5mm (F type: 4mm)

3.2~34.9mm (1/8"~1-3/8")

By hand: 7mm, By knee: 13mm

A: DP×5 (#9) #9~#16 F: DP×5 (#10) #9~#16

2.4~38.1mm (3/32"~1-1/2")

S: DP×5 (#14) #9~#16

G: DP×5 (#21) #16~#23

LH-3568A-7 LH-3568A LH-3588A-7

(with large hooks)

LH-3588A

(with large hooks)

The sewing machine with organized split needle bars is

the only sewing machine in the industry that comes with

the semi-dry head. It helps reduce poor-quality products

due to oil stains even in the case of product items which

have corner stitching sections.

*The semi-dry head sewing machine with organized split

needle bars is only available from JUKI.

*A thread tension control mechanism has been

developed for each type of sewing machine in order to

achieve the best-suited thread tension for its purpose.

*Two selectable new-method oiling mechanisms.

LH-3528A-7

LH-3578ALH-3578A-7

G: Jeans and heavy-weight

3,000sti/min

5mm

3.2~38.1mm (1/8"~1-1/2")3.2~25.4mm (1/8"~1")

By hand: 7mm, By knee: 13mm

G: DP×5 (#21) #16~#23

LH-3568A-7

Model name

Application

Corner stitching

(Organized split needle bar mechanism )

Max. sewing speed

Max. stitch length

Lift of the presser foot

Needle

(max. )

Foundation

4mm

DP× 5 #10 (#9~ #16)

Not provided

Medium-weight

3,000sti/min

5mm

13mm

DP × 5 #14 (#9 ~ #16)

provided

LH-4588CFG-7LH-4578CFG-7LH-4578CFF LH-4578CFS LH-4578CFS-7 LH-4588CFS-7

Jeans and heavy-weight materials

Not provided

DP × 5 #21 (#16~#23)

provided

7mm

Model name LH-3568ALH-3568A-7 LH-3588A (large hooks)LH-3588A-7 (large hooks)

Application

Max. sewing speed

Max. stitch length

Needle gauge

Presser foot

Needle

S: Medium-weight, G: Jeans and heavy-weight

3,000sti/min

5mm

3.2~25.4mm (1/8"~1")

By hand: 7mm, By knee: 13mm

S: DP×5 (#14) #9~#16

G: DP×5 (#21) #16~#23

G: Jeans and heavy-weight

3.2~25.4mm (1/8"~1")

By hand: 7mm, By knee: 13mm

G: DP×5 (#21) #16~#23

3,000sti/min

5mm

0807

Page 9

Overlock / Safety Stitch Machine Overlock / Safety Stitch Machine

Direct-drive, Overlock / Safety Stitch Machine

MO-6700DA Series

JUKI’s dry-head technology has been introduced to the MO-6700S,

which has excellent seam quality and higher productivity. Only the

parts which mainly contribute to oil splashes are improved to have

dry mechanisms to create the semi-dry-head overlock machine,

MO6700DA series. As a result, oil stains on the sewn products are

eliminated.

Model name MO-6743DA

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Bottom differential feed ratio

Needle

1-needle overlock

0.8~4mm 1.5~4mm

—

1.6, 3.2, 4.0, 4.8mm

MO-6714DAMO-6704DA

2-needle overlock

7,000sti/min

2.0, 3.2mm

2.0, 3.2, 4.0, 4.8mm

For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)

DC×27 (excluding some subclass model)

MO-6716DA

Safety stitching

3.2, 4.8, 4.8+2.0, 3.2+2.0mm

3.2, 4.0, 4.8, 6.4mm

3-needle Safety stitching

3.2+2.0, 4.8+2.0mm

3.2mm

Direct-drive, High-speed, Overlock / Safety Stitch Machine

MO-6800S/DD10, DD22, DD23 Series MO-6800D/DD10, DD22, DD23 Series

The sewing machine is a direct drive type in which a control box

and an operation panel are integrated with the machine head. The

machine achieves a practical maximum sewing speed of

7,000sti/min. The MO-6800D/DD series are eliminated oil stains on

the sewing product with “dry" technology.

(Semi-dry-head)

MO-6714DA

Semi-dry-head, High-speed, Overlock / Safety Stitch Machine

MO-6800D Series

JUKI's dry technology has been adopted for the MO-6800S which produces seams of

delicate quality and feel as well as achieves excellent cost-effectiveness. This is a

semi-dry head overlock machine with the dry mechanism which eliminates oil-splashing

problem. As a result, oil stains on the sewn products are eliminated.

Model name MO-6816D

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Differential feed ratio

Needle

MO-6804D

1-needle overlock

—

4.0mm

MO-6814D

2-needle overlock

7,000sti/min

0.6~3.8 (4.5) mm

2.0mm

2.0, 3.0, 4.0mm

Gathering 1:2 , Stretching 1:0.7

DC×27 (excluding some subclass model)

Safety stitching

3.0, 5.0mm

4.0, 5.0mm

High-speed, Overlock / Safety Stitch Machine

MO-6800S Series

The MO-6800S Series responds to various kinds of sewing materials and processes,

producing delicate and beautiful soft-to-the-touch seams while further reducing

operating noise as well as increasing durability. This advanced overlock / safety stitch

machine is easier to use and promises superior cost-effectiveness.

Model name MO-6816S

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Differential feed ratio

Needle

MO-6804S

1-needle overlock

—

1.5, 4.0mm

For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)

DC×27 (excluding some subclass model)

MO-6814S

2-needle overlock

7,000sti/min

0.6~3.8 (4.5) mm

2.0mm

3.0, 4.0mm

Safety stitching

3.0, 5.0mm

4.0, 5.0, 6.0mm

MO-6816D

MO-6843D

3-needle safety stitching

5.0+2.0mm

3.0mm

MO-6816S

Model name

Stitch type

Max. sewing speed

Stitch length

Needle gauge (mm)

Overedging width (mm)

Differential feed ratio

Needle

MO-6714DA

MO-6800S/ DD10, 22, 23 MO-6800D/ DD10, 22, 23

MO-6804S MO-6814S MO-6816S MO-6843S MO-6804D MO-6814D MO-6816D MO-6843D

1-needle

overlock

— 2.0

1.5, 4.0 3.0, 4.0 4.0, 5.0, 6.0 3.0 4.0 2.0, 3.0, 4.0 4.0 3.0

2-needle

overlock

Safety

stitching

3.0, 5.0

Gathering 1:2 (Max. 1:4), Stretching 1:0.7 (Max. 1:0.6)

3-needle

safety stitching

7,000 sti/min

0.6~3.8 (4.5) mm

3.0+2.0, 5.0+2.0

DC×27 (excluding some subclass model)

1-needle

overlock

— 2.0 3.0 5.0+2.0

2-needle

overlock

Safety

stitching

safety stitching

3-needle

Super-high-speed, Overlock / Safety Stitch Machine

MO-6900S Series

Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed softfeeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 8,000 to 8,500sti/min. To offer improved sewing capabilities as well as to prevent stitching misshapes, the machine is equipped as standard with the needle thread heat remover and needle cooler.

Model name MO-6904S MO-6914S MO-6916S

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Differential feed ratio

Needle

1-needle overlock

8,500sti/min

—

1.6, 3.2, 4.0, 4.8mm

Gathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)

DC×27 (excluding some subclass model)

2-needle overlock

8,000sti/min

0.8~4mm

2.0, 2.4, 3.2mm

3.2, 4.0, 4.8mm

Safety stitching

1.5~4mm

2.0, 3.2, 4.0, 4.8, 4.8+2.0mm

3.2, 4.0, 4.8, 6.4mm

MO-6914S

1009

Page 10

Overlock / Safety Stitch Machine

High-speed, Variable Top-feed, Overlock / Safety Stitch Machine

MO-6900R Series

The locus of the top feed dog increases the surfaces of the top feed dog that horizontally synchronize with the bottom feed dog, to reliably feed the materials without damaging them. The feed mechanism smoothly feeds light-weight materials softly or feeds heavy-weight materials with an increased cloth-biting force. The fulcrum of the top feed locus can be set at the bestsuited position according to the material or process.

Model name MO-6904R MO-6914R MO-6916R

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Differential feed ratio

Needle

1-needle overlock

—

3.2, 4.0, 4.8, 6.4mm

Gathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)

DC×27 (excluding some subclass model)

2-needle overlock

7,000sti/min, 6,000sti/min

0.8~4mm

2.0mm

3.2, 4.0mm

Safety stitching

1.5~4mm

3.2, 4.8, 4.8+2.0mm

3.2, 4.0, 4.8, 6.4mm

Overlock / Safety Stitch Machine for Extra Heavy-weight Materials

MO-6900J Series MO-6900G Series

The machine incorporates a mechanism and parts that are optimum for the sewing of

extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot

and coarse type feed dog. It demonstrates an excellent performance ability in the

sewing of various kinds of heavy-weight materials such as jeans, raised fabric

materials, mats and carpets.

Model name

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Differential feed ratio

Needle

MO-6904J

1-needle overlock

2.5~5mm

Gathering 1:1.75 (max. 1:3.8) Stretching 1:0.7 (max. 1:0.6)

(variable top-feed)

(Differential-feed)

—

4.8mm

MO-6914J

2-needle overlock

2.5~4mm

2.6mm

6.4mm

Gathering 1:2 (max. 1:3.8) Stretching 1:0.8 (max. 1:0.6)

Gathering 1:1.75 (max. 1:3.8) Stretching 1:0.

DO×5 (excluding some subclass model)

Safety stitching

2.5~5mm

4.8mm

4.8, 6.4mm

7 (max. 1:0.6)

6,000sti/min

Gathering 1:1.75 (max. 1:3.8) Streching 1:0.

Super-high-speed, Cylinder-bed, Overlock Machine

MO-6900C Series

The machine provided with a small-in-diameter cylinder bed, is capable of runstitching

or blind-hemming tubular materials, such as sleeve cuffs, with ease.

MO-6904GMO-6916J

1-needle overlock

2.5~5mm

—

4.8mm

7 (max. 1:0.6)

MO-6914G

2-needle overlock

2.5~4mm

2.6mm

6.4mm

Gathering 1:2 (max. 1:3.8) Streching 1:0.8 (max. 1:0.6)

Gathering 1:1.75 (max. 1:3.8) Streching 1:0.

MO-6914R

MO-6916J

MO-6916G

Safety stiching

2.5~5mm

4.8mm

4.8, 6.4mm

7 (max. 1:0.6)

High-speed, Cylinder-bed, 2-needle Overlock Machine

MO-6914C-BD6-307/X81028

The machine comes with the top feed dog that moves along an ideal locus. The feed

dog securely catches the material and allows the multi-layer portion of a material to

be fed under it with consistency. In addition it helps finish uniform seams while

preventing the presser foot from jumping and smoothly feeds the material without fail.

Compact-shape of the cylinder effectively prevents the material from being fed

unevenly and from twisting in various kinds of sewing of tubular materials eg., joining

sleeve cuffs of which diameter is small and blind hemming long materials.

Model name

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Bottom differential feed ratio

Needle

7,000sti/min (longitudinal stroke of top feed dog is 6mm or less) 6,000sti/min (longitudinal stroke of top feed dog is 6~8.5mm)

MO-6914C-BD6-307/X81028

2-needle overlock

0.8~3.5mm

2.0mm

3.2mm

For gathering 1:2.3 , For stretching 1:0.8

DC×27

(variable top-feed type)

Semi-Dry head, Digital Zigzag Stitching Sewing System

LZ-2290C-7 LZ-2290C

The LZ-2290C series has two specifications of full digital

and digital.

In the full digital specification, Vertical, Horizontal feeding

mechanism are motorized to allow simplified parameter

adjustments via the control panel. Feed timing which

traditionally requires long duration of adjustment can now

be simply changed via the control panel. System also allows changes from (Soft 󲰜 Standard 󲰜 Hard) settings

based on the process suitability. Thanks to the adoption

of the active presser foot, the presser foot pressure can

be corrected according to the sewing speed, and

jumping during high-speed sewing can be suppressed.

Management, browsing and editing of data can be carried out on the application software

A “Two-way” contactless communication for parameter adjustment data can be conducted with the sewing

machine by a commercial Android terminal. This feature allows sewing machines in a sewing line to be

uniformly set and status checked quickly, thereby contributing to stabilization in product quality.

Control panel is standardized with USB ports, promising simplicity in data management and system updates.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

MO-6914C-BD6-307/X81028

Zigzag Stitching Machine

LZ-2290C-7

Model name

Stitch type

Max. sewing speed

Stitch length

Needle gauge

Overedging width

Bottom differential feed ratio

Needle

1-needle overlock

8,000sti/min

0.8~3.5mm

—

3.2, 4.0, 4.8mm

Gathering 1:2.3 (max. 1:4.5), Streching 1:0.8

DC×27

2-needle overlock

MO-6914CMO-6904C

2.0mm

3.2, 4.0mm

MO-6914C

Model name

Type

Max. sewing speed

Max. zigzag width

Max. stitch length

Thread tension control mechanism

Presser system

Number of patterns for standard stitching

Custom pattern memory capacity

Needle

LZ-2290CS-7 LZ-2290CSLZ-2290CF-7

Full Digital Type Digital Type

5,000sti/min

8mm

5mm

Rotary active tension

Active presser type (AK-156)

Rotary type (spring-adjustment type)

Spring type (AK155)

11 types / 20 patterns

200 patterns

DP×5 (#10), 438 (Nm75)

1211

Page 11

Zigzag Stitching Machine Zigzag Stitching Machine

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine (standard zigzag / standard wider zigzag)

LZ-2280A

The standard zigzag stitching machine which creates softly

finished seams. The needle rocking mechanism is provided

with a triangular cam which helps produce beautiful seams

with consistency.

Model name

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Needle

LZ-2280AA LZ-2280AB

Standard zigzag

5mm

2.5mm

Standard wider zigzag

5,000sti/min

8mm

5mm

134 SUK (Nm70)

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine (with standard / 3-step zigzag stitching pattern changeover function)

LZ-2284A-7 LZ-2284A

Designed to handle both standard and 3-step zigzag

stitching, the machine offers increased availability.

The direct-drive motor system has been adopted by all of the

sewing machines with a thread trimmer. As a result, the

sewing machine starts up swiftly and promises increased stop

accuracy, thereby demonstrating improved responsiveness.

Model name

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Needle

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine (with 3-step zigzag / scallop stitching pattern changeover function)

LZ-2284A-7, 2284A

Standard / 3-step zigzag

5,000sti/min

5mm (standard) / 10mm (3-step)

2.5mm

134 SUK (Nm70)

LZ-2280A

LZ-2284A-7

High-speed, 1-needle, Lockstitch, Standard Zigzag Stitching Machine with Lower Knife

LZ-2282N-7 LZ-2282N

When used in the lace-attachment process for ladies’

foundation, the machine sews lace on the garment body while

simultaneously cutting only the garment body.

Model name

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Needle

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine

LZ-2285N

The maximum needle throw is 10mm. The needle rocking

mechanism means a higher degree of accuracy, thereby

leading to a very high performance.

Model name LZ-2285N

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Needle

(fagoting)

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine with Anti-material-slip Type

LZ-2284NU-7 LZ-2284NU

LZ-2282N-7, 2282N

Standard zigzag (with lower knife)

5,000sti/min

4.5mm

2.5mm

438 (Nm70), DP×5 (#10)

Fagoting

4,000sti/min

8mm

2.2mm

438 (Nm80)

(with standard / 3-step zigzag stitching pattern changeover function)

LZ-2282N-7

LZ-2285N

LZ-2287A

Designed to handle both 3-step zigzag and scallop stitching,

the machine offers increased availability.

Model name

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Needle

LZ-2287A

3-step zigzag / scallop

5,000sti/min

10mm

2.5mm

134 SUK (Nm70)

LZ-2287A

LZ-2280NU

The sewing machine provided with an anti-material-slip

function, which promises more beautifully finished seams, is

included in three different model lineups. With its newly

developed feed mechanism, the machine prevents “uneven

feed of the upper and lower cloths” when sewing girdles and

body suits made of slippery, elastic materials.

Model name

Stitch system

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. feeding

amount

Needle

LZ-2284NU-7, 2284NU

Standard / 3-step zigzag

4,500sti/min

10.0mm (standard)

10.0mm (3-step)

2.5mm (standard)

2.0mm (3-step)

438 (Nm70), DP×5 (#10)

LZ-2280NU

Standard zigzag

10.0mm

LZ-2280NU

1413

Page 12

Post-bed Sewing MachineZigzag Stitching Machine

High-speed, Cylinder-bed, 1-needle, Lockstitch, Zigzag Stitching Machine (with standard / 3-step zigzag stitching pattern changeover function)

LZ-2284C-7

The cylinder bed zigzag stitch machine is best suited to the circular stitching processes of tubular products such as girdles, shorts and swimwear.

Model name

Stitch systerm

Stitch pattern

Max. sewing speed

Max. zigzag width

Max. stitch length

Peripheral dimension of the cylinder section

Needle

Standard zigzag: zigzag width of 5mm or less

3-step zigzag: zigzag width set to 8mm or less

Standard zigzag: 8mm, 3-step zigzag: 10mm

Standard zigzag: 2.5mm, 3-step zigzag: 2mm

LZ-2284C-7

Standard / 3-step zigzag

5,000sti/min

322mm

438 (#75), DP×5 (#10)

1-needle, Lockstitch, Zigzag Stitching Machine and Embroidering Sewing Machine

LZ-271

(for embroidering only)

LZ-391N

The machine is capable of embroidering nanes and marks on sewing products, as well as zigzag stitching, by simply changing the throat plate. When using this machine for zigzag stitching, the zigzag width and stitch length can be changed so that many different types of zigzag stitch can be sewn.

Model name

Max. sewing speed

Needle bar stroke

Zigzag width

Stitch length

Needle

LZ-271 LZ-391N

2,000sti/min (with zigzag width is set to 10mm) 1,700sti/min (with zigzag width is set to 12mm)

33.4mm

0〜12mm

—

DB×1B (#11) #9~#18 DB×1B (#14) #9~#16

Max. 5mm

LZ-2284C-7

LZ-391N

1-needle, Lockstitch, Post-bed type Basting Machine

LT-591

This model is a specially developed machine to increase the

sewing efficiency of basting process.

Model name

Max. sewing speed

Max. stitch length

Needle

LT-591

600sti/min

Free

TV×7 (#14)

High-speed, Flat-bed, Top and Bottom Coverstitch Machine (universal type)

MF-7500-U11 MF-7500-U11/UT MF-7500D-U11 MF-7500D-U11/UT

The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. The front cover is trimmed to allow operators to bring their hands closer near the needle entry area, thereby increasing work efficiency in the covering process, etc.

(semi-dry head)

LT-591

Coverstitch Machine

Post-bed Sewing Machine

Computer-controlled, Dry-head, Lockstitch Sleeve Setting Machine with Multi-programming Device

DP-2100

The machine is the culmination of JUKI's leading edge technologies to enable a sleeve setting process, which is the most difficult of all sewing processes, thereby more easily achieving upgraded seam quality. The machine comes with a newly developed belt feed mechanism that offers excellent responsiveness to materials and ease of their handling.

Model name

Max. sewing speed

Stitch length

(both top and bottom)

Amount of the alternating

vertical movement of the presser foot and walking foot

Number of programs that can be input

Number of steps that can be

input (for one program)

Needle

3,500sti/min (feed pitch 1.5~4.0mm)

DP-2100

1.5~6mm

Max. 3.5mm

99 programs

30 steps

DP×17 #10~#14

DP-2100

T-shirts Knitwear

Model name

Max. sewing speed

Needle gauge

Stitch length

Needle

MF-7500/U11 MF-7500D/U11

6,500sti/min

3.2, 4.0, 4.8, 5.6, 6.4mm

Swimwear

5,000sti/min

5.6, 6.0, 6.4mm

1.2~3.6mm

UY128GAS (#10S) #9S〜#12S

High-speed, Flat-bed, Top and Bottom Coverstitch Machine (collarette attaching)

MF-7500-C11 MF-7500D-C11

This model is best suited for attaching collarettes on underwear, briefs and knitwear. Ease of use is further improved by using the electromagnetic type tape cutter (TC16).

Model name MF-7500-C11 MF-7500D-C11

Max. sewing speed

Needle gauge

Stitch length

Needle

3.2, 4.0, 4.8, 5.6, 6.4mm

(semi-dry head)

BriefsUnderwear

6,500sti/min

1.2~3.6mm

UY128GAS (#10S) #9S〜#12S

5,000sti/min

4.0, 5.6, 6.4mm

MF-7523-U11

MF-7523D-C11

1615

Page 13

Coverstitch MachineCoverstitch Machine

High-speed, Flat-bed, Top and Bottom Coverstitch Machine (elastic lace attaching with right hand fabric trimmer)

MF-7500-E11 MF-7500D-E11

The machine is intended for the elastic lace attaching of shorts, lingerie and foundations. The right hand fabric trimmer cuts the multi-layered section of joined seams without fail to achieve uniformly and beautifully finished seams, with the seams and material-edge aligned.

Ladies' inner wear Shorts

Model name MF-7500-E11 MF-7500D-E11

Max. sewing speed

Needle gauge

Stitch length

Needle

Semi-dry head, Cylinder-bed, Bottom Coverstitch Machine (with digital type top feed /For hemming〈with left hand fabric trimmer〉)

3.2, 4.0, 5.6, 6.4mm

(semi-dry head)

6,500sti/min

0.9~3.6mm

UY128GAS (#10S) #9S〜#12S

5,000sti/min

4.0, 5.6, 6.4mm

MF-7912DRH24 MF-7913DRH24

This mechanism prevents problems, such as twist of fabric, uneven material feed, skew of grain and stitch gathering on multi-layered sections of material,which are likely to occur when sewing elastic materials, thereby achieving stable seam quality. Digital setting of the top feed mechanism enables easy adjustment of sewing even when the product to be sewn is changed, thereby reducing the setup time.

H24

MF-7523-E11

High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (hemming)

MF-7900-H11 MF-7900-H11/UT MF-7900D-H11/UT

The machine is intended for the hemming of knit shirts and T-shirts.

This model is best suited to elastic-band welting for swimwear, briefs, etc.

It welts the elastic band which has been overlocked on the garment body.

H11

Briefs

MF-7900D-H11

Model name

Max. sewing speed

Needle gauge

Stitch length

Needle

Polo shirtsT-shirts

MF-7900-H11

Swimwear

5,000sti/min

5.6, 6.4mm

0.9〜3.6mm

UY128GAS (#10S) #9S〜#12S

High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (hemming with left hand fabric trimmer)

MF-7900-H22, 23 MF-7900-H22, 23/UT MF-7900D-H22, 23 MF-7900D-H22, 23/UT

This model is best suited to hemming processes for sleeves and the bottoms of

T-shirts, Polo shirts, etc. It comes with a left hand fabric trimmer for trimming

fabric in parallel, at all times, to the seam with consistency. The upper knife

stroke can be adjusted with ease.

(semi-dry head)

MF-7923-H11

Polo shirtsT-shirts

Model name

Stitch type

Max. sewing speed

Feed mechanism

Stitch length

Needle

MF-7912DRH24 MF-7913DRH24

Semi-dry head,

2-needle bottom covering stitch

5,000sti/min

Digital type top feed

0.9mm〜3.6mm

UY128GAS (#10S) #9S〜#12S

Semi-dry head,

3-needle bottom covering stitch

High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (universal type)

MF-7900-U11 MF-7900-U11/UT MF-7900D-U11 MF-7900D-U11/UT

U11

(semi-dry head)

MF-7900DRH24

H22,23

Polo shirtsT-shirts

Model name

Max. sewing speed

Needle gauge

Stitch length

Needle

MF-7900-H22, 23/UT MF-7900D-H22, 23

6,000sti/min 5,000sti/min

4.0, 4.8, 5.6, 6.4mm 4.8, 5.6, 6.4mm

0.9〜3.6mm

UY128GAS (#10S) #9S〜#12S

Semi-dry head, Cylinder-bed, Top & Bottom Coverstitch Machine (hemming with left hand fabric trimmer, for extra light-weight materials)

MF-7900D-H24/UT MF-7900D-H25/UT

The machine is best-suited for the hemming of stretchy new material such as

T-shirts, underwear and sportswear, etc. The machine produces seams with no

semi-cylindrical swells by performing sewing while making the feeding lengths of

the right and left needle threads equal. The sliding presser foot prevents the

material hem from twisting during sewing and further eliminates oblique-feeding

of the material in terms of its texture.

H24,25

(with sliding presser foot)

MF-7923D-H23

T-shirts Polo shirts

Model name

Max. sewing speed

Needle gauge

Stitch length

Needle

Knitwear Swimwear

MF-7900-U11 MF-7900D-U11

6,500sti/min

3.2, 4.0, 4.8, 5.6, 6.4mm

0.9〜3.6mm

UY128GAS (#10S) #9S〜#12S

5,000sti/min

4.0, 5.6, 6.4mm

MF-7923-U11

Model name

Max. sewing speed

Needle gauge

Stitch length

Needle

Stretchy New Material

MF-7900D-H24 MF-7900D-H25

5,000sti/min

3.2, 4.0, 5.6, 6.4mm

0.9〜3.6mm

UY128GAS (#10S) #9〜#12S

MF-7923D-H24

1817

Page 14

Coverstitch Machine

High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (elastic band attaching with right hand fabric trimmer)

MF-7900-E11 MF-7900-E11/UT MF-7900D-E11 MF-7900D-E11/UT

This model is best suited to endless flat elastic band sewing processes for briefs, boxer

briefs, etc. The right hand fabric trimmer trims the fabric, even at a multi-layered joined part,

to produce a beautiful finish with the seam and fabric edge aligned with consistency.

The right hand fabric trimmer mechanism is a unit-structure to permit easy installation /

removal. This contributes to easier adjustments, such as looper aligning.

E11

Model name

Lubrication

Max. sewing speed

Needle gauge

Stitch length

Needle

High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (endless spandex elastic band attaching)

(semi-dry head)

Boxer briefsBriefs

MF-7900-E11/PL MF-7900D-E11

Automatic (frame: no lubrication)

5,000sti/min

4.0, 5.6, 6.4mm 5.6mm

0.9〜3.6mm

UY128GAS (#10S) #9S〜#12S

MF-7913D-E11

4-needle, Feed-off-the-arm, Flatseamers, Top and Bottom Coverstitch Machine

MF-3620

A new model with a direct-drive servomotor has been introduced as an addition to

the MF Series of JUKI sewing machines. The new machine consumes only about

half the power of the conventional models. The enhanced responsiveness

(compared with the model equipped with the clutch motor) of the MF-3620 gives

the operator complete control over the material when sewing curved sections.

Safely within its new shield, the frame is equipped with mechanisms for

micro-quantity lubrication and forced oil circulation. The thread take-up mecha-

nism arranged on the outside of the arm prevents the entry of oil splashes and

dust. The MF-3620 is also configured with JUKI's unique oil-thrower mechanism to

protect the looper section from oil infiltration. Excess oil is speedily reclaimed via

the new oil groove. A mounting base for the direct-drive type machine head is

provided as standard with a hand pulley.

Model name

Application

Max. sewing speed

Stitch length

Needle gauge

Needle

Retainer needle

Installation method

MF-3620-B (direct-drive type) MF-3620 (belt-drive type)

Light- to heavy weight (knit)

4,200sti/min

1.6〜2.5mm (standard 2.1mm)

5.2, 6.0mm

FL×118GCS (#10S) #9S〜#12S

FLG-8 (#8) #8〜#11

Standard type

(with hand pulley)

MT05

Wooder auxiliary plate

MF-3620

MF-7900-E22 MF-7900-E22/UT MF-7900-E23 MF-7900-E23/UT

The machine is used for spandex elastic band sewing processes for briefs.

The machine produces soft seams, making it best-suited for band attaching

processes where seams are required to have sufficient elasticity.

E22, E23

Briefs

Model name

Lubrication

Max. sewing speed

Needle gauge

Stitch length

Needle

(with manual binder)

(with air binder)

MF-7900-E22,23/PL

Automatic (frame: no lubrication)

5,000sti/min

5.6, 6.4mm

0.9〜3.6mm

UY128GAS (#10S) #9S〜#12S

Semi-dry-head, Small-cylinder-bed, Top and Bottom Coverstitch Machine

MF-7200D-U10 MF-7200D-K10

The small cylinder-bed and semi-dry head features have been achieved while

placing priority on ease of use. Outer circumference of the cylinder section is

176mm!! The cylinder has the industry’s smallest diameter. The outer circumfer-

ence of the cylinder section has been reduced to 176mm. This allows the sewing

machine to easily sew conventionally hard-to-sew small-in-diameter tubular parts

such as the sleeve cuffs of sportswear and ladies’ cut-and-sewn wear and the

necklines of children's wear.

Model name

Lubrication

Max. sewing speed

Needle gauge

Stitch length

Needle

(universal type)

(covering)

MF-7200D

Automatic (frame: no lubrication)

4,000sti/min

5.6, 6.4mm

Max. 4.2mm

UY128GAS (#10S) #9S〜#12S

MF-7923-E22

MF-7223D-U10

1-needle, Double Chainstitch Machine

MH-481-5 MH-481 MH-484-5 MH-484 MH-486-5

The machine comes with a thread spreading mechanism and an adjustable

needle guard to prevent stitch skipping. The thread clamp mechanism,

tension release mechanism and needle thread draw-out mechanism enable

the machine to leave thread of a uniform length after thread trimming, and

prevent slip-off of the needle thread. All of these mechanisms contribute to

upgraded sewing.

Model name MH-481-5, 481 MH-484-5, 484 MH-486-5

Max. sewing speed

Stitch length

Presser foot

Needle

(differential-feed)

(bottom and variable top-feed)

5,500sti/min

1〜4mm

TV×7 (#11) #9〜#18

Main feed: 1〜4mm

Differential feed: 1〜5.6mm

By knee: 10mm

4,500sti/min

1〜5mm

By knee: 7mm

TV×7 (#11) #9〜#21

Chainstitch Machine

MH-481-5

2019

Page 15

Chainstitch MachineChainstitch Machine

High-speed, Flat-bed, 2-needle Double Chainstitch Machine

MH-380 MH-382

Accurate stitching performance and durable finished seams are particularly

necessary in the chainstitching process. JUKI ensures high-quality sewing

with a higher degree of consistency with its unique looper mechanism and

consistent condensation stitching mechanism.

Max. sewing speed

Stitch length

Presser foot

Needle

(parallel 2-needle)

(tandem 2-needle)

MH-380, 382Model name

6,000sti/min

1〜4mm

By knee: 10mm

TV×7 (#14) #9〜#21

Feed-off-the-arm, 3-needle Double Chainstitch Machine

MS-3580

This machine demonstrates increased feed efficiency to handle extra heavy

weight 16-ply denim. Engineered with extra feeding strength for seaming

the inside of jeans. The machine is best suited for lap seaming jeans, denim

jackets, work uniforms, etc. constructed of heavy weight materials.

Model name

Application

Max. sewing speed

Stitch length

Needle

Top feed roller width

Feed adjusting

method

Installation method

MS-3580S＊1SN MS-3580S＊0SN

Medium- to heavy-weight:

jeans, denim jackets, work uniforms, etc.

4,500sti/min

2.1〜3.6mm (standard 3.2mm)

UY130GS (standard) / Nm140 (#22)

11.9mm

Main feed: Slide-type stitch -length adjusting method

Differential feed:

Lever adjusting method

To be installed on the table by means of

an auxiliary drive assembly MT03

Without the differential

feed capability

MH-382,MH-380

MS-3580S

Feed-off-the-arm, Double Chainstitch Machine

MS-1190 MS-1261

Thanks to the thread guide located between the needle bar thread take-up and the intermediate tention release lever,

the timing to tense the needle thread can be decreased.

As a result, the machine is capable of beautiful stitches with a soft appearance even when heavy-weight material is used.

Model name

Application

Max. sewing speed

Needle gauge

Stitch length

Needle

Model name

Application

Max. sewing speed

Needle gauge

Stitch length

Needle

(2-needle, for light- to medium weight)

(3-needle, for heavy-weight)

MS-1190 MS-1190M

Light-weight

4,000sti/min

3.2mm (1/8")〜6.4mm (1/4")

1.2〜3.2mm

TV×64-NY (#12) #8〜#14

B-64 (Nm80) Nm60〜Nm90

MS-1261M MS-1261

Medium- to heavy-weight

3,600sti/min

5.6mm (7/32")〜9.6mm (3/8")

1.4〜4.2mm

UY128GAS-NY (#19) #16〜#22 UY128GAS (Nm120) Nm100〜Nm140

Medium-weight

TV×64-NY (#16) #12〜#19

B-64 (Nm100) Nm80〜Nm120

Extra heavy-weight

UY128GAS-NY (#21) #16〜#22

UY128GAS (Nm130) Nm100〜Nm140

Pinpoint Saddle Stitching Machine

MP-200N

The machine is able to perform sewing with a reduced tension applied to the

thread, thereby widening its application range. With its upgraded respon-

siveness to changes in materials and processes, the machine always

produces beautiful and soft pinpoint stitches.

MS-1261/V045

High-speed, Feed-off-the-arm, 3-needle Double Chainstitch Sewing System (Digital workstation)

MS-1261A/DWS

Thanks to the thread guide located between the needle bar thread take-up and the intermediate tention release lever, the timing to tense the needle thread can be decreased. As a result, the machine is capable of beautiful stitches with a soft appearance even when heavy-weight material is used.

(for heavy-weight)

Management, browsing and editing of data can be carried out

on the application software

A “Two-way” contactless communication for parameter adjustment data can be conducted with the sewing machine by a commercial Android terminal. This feature allows sewing machines in a sewing line to be uniformly set and status checked quickly, thereby contributing to stabilization in product quality. Control panel is standardized with USB ports, promising simplicity in data management and system updates.

Model name

Application

Max. sewing speed

Needle gauge

Stitch length

Needle

Lubrication

5.6mm（7/32"） 6.4mm（1/4"） 7.1mm（9/32"） 7.9mm（5/16"） 9.5mm（3/8"）

UY128GAS (Nm120) Nm100〜Nm140

MS-1261AM MS-1261A

Medium- to heavy-weight

5,500sti/min

1.4〜4.2mm

UY128GAS-NY (#19) #16〜#22

Automatic Lubrication

UY128GAS-NY (#21) #16〜#22

UY128GAS (Nm130) Nm100〜Nm140

Extra heavy-weight

MS-1261A/DWS

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

Model name

Max. sewing speed

Needle

Hook-needle

Needle

Recommended

yarn count

1,500sti/min (stitch length 6〜8mm) ORGAN CP×1J (#22U) #18U〜#22U ORGAN CP×12J (#23) #19〜#23

#30〜#8, B46〜B92, Nm=60/3〜30/3

MP-200NL

Single-thread, Chainstitch Basting Machine

ML-111U

Chainstitch is continuously formed with a single thread and by a blind looper

which eliminates the need for a bobbin thread refilling. In addition, the

basted seam can be easily undone.

Model name ML-111U

Max. sewing speed

Max. stitch length

Presser foot

Needle

1,800sti/min

10mm

By knee: 12mm

TV×7 (#14) #11〜#14

Model name

Max. sewing speed

Needle

Hook-needle

Needle

Recommended

yarn count

MP-200NL

MP-200NS

2,000sti/min (stitch length 6mm or less)

SCHMETZ 29C150 (Nm90) Nm80〜Nm140 SCHMETZ 29C151 (Nm100) Nm80〜Nm140

#60〜#30, B33〜B46, Nm=120/3〜60/3

ML-111U

2221

Page 16

Button Sewing Machine

Computer-controlled, High-speed, Lockstitch, Button Sewing System

LK-1903BNB

(bird’s nest preventing / shorter-thread remaining functions)

Users who are conscious about the finished quality of

products manually nip, with scissors, the thread

remaining on the material after thread trimming at the

end of sewing. Now, the button sewing machine with

the bird's nest preventing/shorter thread remaining

functions saves such users the trouble of nipping the

thread, thereby preventing the sewing product from

being damaged by manual thread-nipping with

scissors.

LK-1903BN

The machine achieves sewing speed of 2,700sti/min.

The machine's starting, stopping, thread-trimming and

automatic presser lifting speeds have been increased

to significantly shorten total cycle time. With our

original horizontal forced feed mechanism, the button

carrier sets a button in position so that the operation is

simplified. Furthermore, operator fatigue is reduced

since what operator needs to do is only setting

material and pressing a pedal.

LK-1903BN/BR35

(with button feeder)

With our original horizontal forced feed mechanism,

the button carrier sets a button in position so that the

operation is simplified. Furthermore, operator fatigue is

reduced since what operator needs to do is only

setting material and pressing a pedal.

A “Two-way” contactless communication for parameter adjustment data can be conducted with the sewing

machine by a commercial Android terminal. This feature allows sewing machines in a sewing line to be

uniformly set and status checked quickly, thereby contributing to stabilization in product quality. Control panel

is standardized with USB ports, promising simplicity in data management and system updates.

*Android OS Version 6.0 is recommended to use JUKI Smart APP. (Operation is confirmed with respect to Versions 5.0 and later.) Contact JUKI distributor in your area for how to use the application software.

＊Use #60-80 (TEX22-30) polyester spun thread

(standard type)

Management, browsing and editing of data can be carried out on the application software

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

Model name Max. sewing speed

Button size

Stitch length

Lift of the work clamp foot Number of standard patterns

Number of data that can be input Needle

LK-1903BNB

Type: Round-shaped, flat button Size: φ8~φ20mm 301: φ8~φ20

Max. 10mm

34 patterns

DP×17 (#11)

LK-1903BN

2,700sti/min

Type: Round-shaped, flat button Size: φ8~φ32mm 301 : φ8~φ20 302: φ10~φ20 OPTION : φ15~φ32

0.1~10mm (0.1mm step)

Max. 13mm

200 patterns

Type: Round-shaped, flat button (2-holed, 4-holed) Size: φ9~φ20mm For small button: φ10~φ15mm For medium-sized button: φ12~φ18mm (Those that are smaller than φ10mm or larger than φ18mm must be specially ordered.) Thickness: 1.8~3.5mm

50 patterns

DP×17 (#14)

LK-1903BN/BR35

Max. 11mm

LK-1903BNB

Computer-controlled, High-speed, Lockstitch, Button Machine

LK-1903S

JUKI Simple Series sewing machine LK-1903S has been designed to have

simplified and narrowed down capabilities that are essentially required to

produce JUKI's established seamquality.In addition, it supports the operator

with the voice guidance system to improve work efficiency.

Model name

Max. sewing speed

LK-1903S-SS

2,700sti/min

Type : Round-shaped, flat button (2-holed, 4-holed)

Button size

Size : φ8~φ32mm 301 : φ8~φ20 302 : φ10~φ20 OPTION : φ15~φ32

Lift of the work clamp foot

Needle (at the time of delivery)

Number of standard patterns

Number of data that can be input

Max.13mm

DP×17（＃14

50 patterns

200 patterns

）

Computer-controlled, Dry-head, High-speed, Single-thread, Chainstitch Button Sewing Machine

MB-1800A/BR10 MB-1800B

(with wiper unit)

(with button feeder)

MB-1800S

The machine is able to independently sew various stitching shapes such as

U-shaped stitching, X-shaped stitching and Z-shaped stitching. The machine

has 55 different stitching patterns as standard. In addition to the sewing

shapes, the buttonhole intervals and number of stitches can also be changed on

the operation panel.

Model name Max. sewing speed

Amount of feed

Applicable buttons

Stitching shape

Button feed mode

Needle

Crosswise feed 0〜4.0mm, Lengthwise feed 0〜4.0mm

Type: Round-shaped flat buttons

,,,,,,,,

Automatic feed mode,

non-feed mode,

and small-lot sewing mode

TQ×7 (#16) #14〜#20

MB-1800B MB-1800SMB-1800A/BR10

1,800sti/min

Crosswise feed 0〜10mm,

Lengthwise feed 0〜6.5mm

Size: φ10〜φ28mmSize: φ10〜φ18mm

,,,

Single-thread, Chainstitch, Button Sewing Machine (thread-fray-prevention ON/ OFF changeover mechanism)

MB-1377

(quick stitch shape changing mechanism)

MB-1373

The machine is provided as standard with a “thread-fray-prevention ON/ OFF

changeover mechanism” to help produce beautiful seams with added durability. Stitch shape can quickly be changed over betweenand button-hole

configurations. (only for MB-1377)

Model name

Max. sewing speed

Number of stitches

Feed length

Stitching shape

Applicable button

Button size

Thickness of button

Needle

(crosswise feed)

(lengthwise feed)

1,500sti/min

8, 16, and 32 stitches

2.5〜6.5mm

Shank button, Wrapped-around button, Snap, Label,

Metal button, Stay button (exclusive attachments have to be used)

φ10〜φ28mm

1.8〜3.5mm (options max. 5mm) TQ×1 (#16) #14〜20

MB-1373MB-1377

0〜6.5mm0〜4.5mm

LK-1903S

MB-1800A/BR10

MB-1377

2423

Page 17

Buttonholing Machine

Computer-controlled, High-speed, Buttonholing Sewing System

LBH-1790ANB

The newly-developed shorter-thread remaining mechanism trims the thread short and eliminates the trouble of manual thread nipping.

LBH-1790AN

The LBH-1790AN Series follows the world’s highest sewing speed and dry-head mechanism of its predecessor model. In addition, this machine comes with the latest model operation panel which is installed with a USB port. Furthermore, all drive mechanisms have been digitalized to manage each sewing pattern individually. The maximum sewing speed is 4,200sti/min., and the jump speed is 200mm/s. The cycle time has been further reduced for continuous sewing.

LBH-1795AN

The knife supports sewing lengths of 41mm at the maximum. Since the LBH-1795ANS is provided as standard with the 120mm presser, it is capable of sewing 120mm long buttonholes. The LBH-1795ANS is capable of sewing long buttonholes such as belt holes in car seats. In addition, it is applicable to the sewing of buttonholes in men's shirts (continuous sewing of two buttonholes and the use of two units of sewing machines), etc.

LBH-1796AN

The LBH-1796AN is a subclass model of the LBH-1790AN Series. This product is provided with a 220mm work clamp foot. It follows the world's highest sewing speed, deeply recessed shape of the machine head and dry-head mechanism of the existing LBH-1790AN. In addition, the LBH-1796AN can also be used as a simplified indexer to sew three buttonholes in a row.

Management, browsing and editing of data can be carried out on the application software

*Android OS Version 6.0 is recommended to use JUKI Smart APP. (Operation is confirmed with respect to Versions 5.0 and later.) Contact JUKI distributor in your area for how to use the application software.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

Model name

Max. sewing speed

Size of cloth cutting knife

Bartacking width

Buttonhole length

Lift of the work clamp

Number of standard patterns

Number of patterns that can be input

Needle

(shorter-thread remaining functions)

Remaining length of thread varies with sewing conditions.

(120mm presser type)

(220mm presser type)

Max. 4,200sti/min, Normal 3,600sti/min When the non-lubricated hook (optional) is used: 3,300sti/min

Max. 5.0mm (with special-specification part: Max.10mm)Max. 4.0mm Max. 5.0mm

Max. 25mm Max. 120mm Max. 220mm

14mm (17mm when the reverse-rotation needle-up function is used) Parallel lifting 6mm

(optional: 70mm, 120mm)

LBH-1790AN LBH-1795ANLBH-1790ANB LBH-1796AN

6.4〜31.8mm (1/4"〜1-1/4")6.4~22.2mm (1/4"~7/8") 6.4〜25.4mm

Max. 41mm

31 patterns

Max. 99 patterns

DP×5 (#11J) #11J~#14J

Computer-controlled, High-speed, Buttonholing Machine

LBH-1790S

JUKI Simple Series sewing machine LBH-1790S has been designed to have simplified and narrowed down capabilities that are essentially required to produce JUKI's established seam quality. In addition, it supports the operator with the voice guidance system to improve work efficiency.

Model name

Max. sewing speed

Size of cloth cutting knife

Buttonhole length

Needle (at the time of delivery)

Lift of the work clamp

Number of standard patterns

Number of patterns that can be input

14mm

4,200sti/min (at the time of delivery: 3,600sti/min)

(17mm when the reverse-rotation needle-up function is used)

LBH-1790SS

6.4~31.8mm (1/4"~1-1/4")

Max. 41mm

DP×5 (#11J) #11J~#14J

31 patterns

Max. 99 patterns

LBH-1790AN

LBH-1796AN

LBH-1790S

1-needle, Lockstitch Buttonholing Machine

LBH-780

Smooth operation contributes to high-quality finished buttonholes and

a higher degree of efficiency.

Model name

Max. sewing speed

Lift of the work clamp

Number of stitches

Buttonhole length

Needle

54〜345 (by gear-change method)

LBH-780

3,600sti/min

Max. 12mm

6.4〜38.1mm

DP×5 #11J, 134 Nm75

LBH-782

Computer-controlled, Eyelet Buttonholing Sewing System (Trimmer for Needle and Looper Thread with gimp)

MEB-3200CSS

(For men’s and ladies’ wear)

MEB-3200CRS

(For combined use for vertical and

horizontal buttonholes:

men’s and ladies’ wear)

MEB-3200CJS

(For jeans)

MEB-3200CCS

(For cotton pants and work pants)

The digitally controlled machine permits

the selection and setting of various eyelet

shapes. We thoroughly pursue operability

and realized easy operation with a new

operation panel. Control panel is config-

ured with a large, highly visible color LCD

touch panel for instant display of the stitch

shape, set values, and menu settings for

the sewing functions.

MEB-3200CSS

Model name

Application Men’s and ladies’ wear

Thread trimming style

Stitch system 1-needle, double chainstitch (with gimp)

Max. sewing speed

Sewing length

Needle throwing width

(at the time of delivery)

Taper bar length

Needle

(at the time of delivery)

*1 When the sewing length of 38~50mm without thread trimmer is selected, the work clamp can be provided by placing special order.Please use the Multi-cutting device when you cut the cloth. *2 By selecting the left looper and left spreader, the range of stitch bite can be changed to 2.6~4.0mm from 2.0~3.2mm (TS model is excluded)

MEB-3200CSS MEB-3200CRS

Combined use for lateral and

longitudinal buttonholing:

for men’s and ladies’ wear

400~2,200sti/min (100sti/min step)

10~38mm (with thread trimmer)

(in case looper thread trimming device is removed)

10~50mm

2.0~3.2mm

DO×558 (Nm100)

Nm90~Nm110

(2.3mm)

0mm, 3~15mm

MEB-3200CJS

Jeans

Shorter remaining threadLonger remaining thread

Work clamp type S 16~24 (26)mm: optional

Work clamp type M 24~32 (34)mm: standard

Work clamp type L 32~40 (42)mm: optional

The figures in ( ) parentheses are in case of taper bar

2.6~4.0mm

DO×558

(3.6mm)

(Nm120)

Nm120~Nm130

MEB-3200CCS

Cotton pants and

working wear

Work clamp type S 16~24 (26)mm: standard

Work clamp type M 24~32 (34)mm: optional

Work clamp type L 32~40 (42)mm: optional

2.0~3.2mm

DO×558

Nm110~Nm120

(2.5mm)

(Nm110)

2625

Page 18

Buttonholing Machine

Bartacking Machine

Computer-controlled, Eyelet Buttonholing Sewing System (for jeans and cotton pants)

MEB-3900

The MEB-3900 reduces the machine time due to its maximum

sewing speed of 2,500 sti/min and its speed-up cloth cutting

knife, thereby demonstrating increased productivity. Then

newly adopted direct-driven main shaft by means of a compact

AC servomotor not only achieves enhanced responsiveness,

but also achieves both reduced noise and reduced vibration.

In addition, the machine has adopted an air-driven cloth

cutting knife which promises excellent responsiveness and

operates faster than the conventional knife.

Management, browsing and editing of data

can be carried out on the application software

A “Two-way” contactless communication for parameter

adjustment data can be conducted with the sewing machine

by a commercial Android terminal. This feature allows sewing

machines in a sewing line to be uniformly set and status

checked quickly, thereby

contributing to stabilization in

product quality. Control panel is

standardized with USB ports,

promising simplicity in data

management and system updates.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

Model name

Application

Stitch system

Sewing speed

Stitch length

Needle throwing width

Taper bar length

Needle

10〜38mm (needle thread trimming type), 10〜34mm (overall thread trimming type)

Mechanical adjustment of the needle throwing width: 2.0〜4.0ｍｍ Compensation of the needle throwing width (by the lower feed dog): 1.5〜5.0mm

MEB-3900J MEB-3900C

Jeans Cotton pants and working wear

1-needle, double chainstitch (with gimp)

400〜2,500sti/min

3〜15mm

D0×558 (Nm110) Nm90〜Nm120

MEB-3900J

Computer-controlled, High-speed, Bartacking Sewing System

LK-1900BNB

(bird's nest preventing / shorter-thread remaining functions)

The sewing machine eliminates so-called “bird’s nests” (thread tangling in on the wrong side of the material at the beginning of sewing). Length of thread remaining on the material at the end of sewing has been reduced to 2mm or less*.

*Remaining length of thread varies with sewing conditions. *Use #60-80 (TEX22-30) polyester spun thread

Shorter-thread remaining

Finishing of the Bird’s nest preventing/ shorter-thread remaining functions (on the wrong side)

LK-1900BN

The machine achieves sewing speed of 3,200sti/min. The machine’s starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.

LK-1901BN

The machine is provided with a material-drawing mechanism which draws the right and left parallel portions of an eyelet buttonhole near to one another. The machine performs bartacking with the right and left parallel portions of the eyelet buttonhole drawn near to one another after the buttonhole is clamped under the work clamp foot, thereby finishing highly durable and well-tensed eyelet buttonholes.

LK-1902BN

The machine is provided as standard with six different linear bartacking patterns. Since the sewing size can be easily changed, the optimal number of stitches and sewing size can be speedily selected according to the belt-loop width. If the normally used patterns are assigned to the patterns keys, a desired pattern can be called up or changed with single-key operation.

LK-1900BNSS000/X75024

This machine is a special model that expands the sewing area to 50mm (W) × 50 (L) mm. It corresponds to the sewing size such as the elastictape connection of the boxer pants, the box sewing of the sleeve spread, and the attach the Velcro.

*The presser foot of this machine is equipped with the standard presser foot (40mm(W) × 30mm(L)). Please arrange the presser foot as necessary.

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Lift of the work clamp foot

Number of stitches that can be stored in memory

Number of standard patterns

Number of data that can be input

Needle

(eyelet buttonholes)

(belt-loop-attaching)

LK-1900BN-SS

Standard

DP×5 (#14)

Management, browsing and editing of data can be carried

out on the application software

LK-1900BN-HS

For heavy-weight

materials

3,200sti/min

Standard 14mm (17mm when the reverse-rotation needle-up function)

DP×17 (#21)

LK-1901BN

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

LK-1900BN-FS

For foundation

30mm (L) × 40mm (W)

0.1~10mm (0.1mm step)

Max. 20,000 stitches

51 patterns

200 patterns

DP×5 (#11)

LK-1900BN-MS

For knits and

knitted materials

LK-1900BN-WS

With large hook

for heavy-weight materials

2,700sti/min

DP×17 (#21)

LK-1900BNB

LK-1902BN

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Lift of the work clamp foot

Number of stitches that can be stored in memory

Number of standard patterns

Number of data that can be input

Needle

(by using the reverse-rotation needle-up function 14mm)

200 patterns

LK-1900BN-BS

Standard

3,200sti/min

Standard 11mm

50 patterns

(for up to 150 patterns, sewing data can be added.)

DP×17 (#14)

LK-1900BN-BF

For foundation

DP×17 (#11)

LK-1901BN-SS

Standard

30mm (L) × 40mm (W)

0.1~10mm (0.1mm step)

(17mm when the reverse-rotation needle-up function)

Max. 20,000 stitches

DP×5 (#14)

LK-1902BN-SS

Standard

3,000sti/min

Standard 14mm

—

200 patterns

LK-1902BN-HS

For heavy-weight

materials

DP×17 (#21)

2827

Page 19

Bartacking Machine

Computer-controlled Cycle Machine

Computer-controlled, High-speed, Bartacking Machine

LK-1900S

JUKI Simple Series sewing machine LK-1900S has been

designed to have simplified and narrowed down capabilities

that are essentially required to produce JUKI’s established

seam quality. In addition, it supports the operator with the voice

guidance system to improve work efficiency.

LK-1900SSS000/X75023

*The presser foot of this machine is equipped with the standard presser foot (40mm(W) × 30mm(L)). Please arrange the presser foot as necessary.

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Lift of the work clamp foot

Needle (at the time of delivery)

Number of stitches that can be stored in memory

Number of standard patterns

Number of data that can be input

LK-1900S-SS LK-1900S-HS

Standard

3,200sti/min (at the time of delivery: 2,700sti/min)

30mm (L) × 40mm (W)

0.1~10mm (0.1mm step)

Standard 13mm (17mm when the reverse-rotation needle-up function)

DP × 5 (#14)

Max. 20,000 stitches

51 patterns

200 patterns

For heavy-weight materials

DP × 17 (#21)

LK-1900S

Computer-controlled Cycle Machine with Input Function

AMS-221F-2516

(

X: 250mm × Y: 160mm

)

AMS-221F-3020

(

X: 300mm × Y: 200mm

AMS-221F has achieved increased

productivity with its maximum

sewing speed of 2,800 sti/min and

beautifully finished seams with its

new feed control system. The active

tension can be changed over with

the memory switch between the

low-tension side output and the

high-tension side output to enable

fine adjustment of the thread

tension in the actual area of use.

Management, browsing and editing of data can be carried out on the application software

A "Two-way" contactless communication for parameter adjustment data can be conducted with the sewing

machine by a commercial Android terminal. This feature allows sewing machines in a sewing line to be

uniformly set and status checked quickly, thereby contributing to stabilization in product quality. Control

panel is standardized with USB ports, promising simplicity in data management and system updates.

The sewing machine can be paired with equipment which supports NFC (Near Field Communication) only by holding the equipment over the sewing machine.

)

AMS-221F-2516

Shape-tacking Machine

Computer-controlled, High-speed Shape-tacking Machine

LK-1910 LK-1920

The sewing speed of 2,500 sti/min is the fastest-level sewing

speed among the shape-tacking machines. The sewing

machine has adopted a semi-rotary two-fold capacity hook. In

addition, the sewing machine comes with enhanced functions

such as the feeding frame with a higher lift and the direct-drive

machine head that provides excellent responsiveness and stop

accuracy support the machine’s high-speed performance,

thereby achieving increased productivity.

Model name

Application

Sewing area

Max. sewing speed

Stitch length

Number of data that can be input

Needle

(with intermediate presser)

LK-1910S, 20S LK-1910H, 20H

Standard Heavy-weight

60mm (L) × 100mm (W)

2,500sti/min

0.1〜10mm

64 patterns

DP×5 (#14)

DP×17 (#18)

LK-1920

Model name

Application

Max. sewing speed

Sewing area

Storage of pattern data in the memory

Needle

AMS-221F-S AMS-221F-H AMS-221F-G

Light- to medium-weight Medium- to heavy-weight Heavy- to Extra heavy-weight

2,800sti/min

0.1~12.7mm (0.05mm step)

Main-body memory: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

DP×5 (#14) DP×17 (#18) DP×17 (#23)

3029

Page 20

Computer-controlled Cycle Machine Computer-controlled Cycle Machine

Computer-controlled Cycle Machine with Input Function

(

AMS-210EN-1306 AMS-210EN-1510 AMS-210EN-2210 AMS-221EN-2516 AMS-221EN-3020

The sewing machine achieves the highest sewing speed, 2,800sti/min, in the industrial sewing machine industry. As a result, cycle time is dramatically reduced. The feed accuracy is substantially improved due to the adoption of the encoder control system. The new AMS Series models substantially decrease power consumption when compared with the conventional ones. They have been designed to achieve eco-friendliness.

X: 130mm × Y: 60mm

(

X: 150mm × Y: 100mm

(

X: 220mm × Y: 100mm

(

X: 250mm × Y: 160mm

(

X: 300mm × Y: 200mm

)

AMS-210EN-1306 (X: 130mm × Y: 60mm)

The sewing machine flexibly supports the sewing of small articles such as labels and emblems. The sewing machine's small sewing area promises ease of use when handling small articles, thereby enabling smooth sewing operation.

AMS-210EN-1510 (X: 150mm × Y: 100mm)

The 1510 model is well received in the market due to its moderate-sized sewing area.Responding to market demand, the 1510 area model with a motor-driven feeding frame has been newly developed.This model can be used in a plant which is not provided with pneumatic equipment.

AMS-210EN-2210 (X: 220mm × Y: 100mm)

This model has a sewing area that is best-suited to the sewing of large parts, including the shape-tacking of jean pockets. With this model, you may recognize the higher productivity of the cycle machine.

AMS-210EN-1510

AMS-221EN-2516 (X: 250mm × Y: 160mm)

The sewing machine is best-suited to the sewing of large labels and emblems, the sewing of two or more pieces of small labels and emblems at one time, and the shape-tacking of bags and shoes. The sewing machine is applicable to a broad range of materials and processes, while leading the industrial sewing machine industry in terms of improvement in quality and the promotion of production that does not require sewing-machine operators to have special skills.

AMS-221EN-3020 (X: 300mm × Y: 200mm)

The sewing machine is applicable to sewing products which require a wider sewing area than that of the “AMS-221EN-2516.” It is best-suited to the attaching of handles to bags and the shape-tacking of boots and shoes. The sewing machine is flexibly applicable to sewing requiring a medium sewing area.

AMS-221EN-2516

Model name

Application

Max. sewing speed

Stitch length

Storage of pattern data in the memory

Needle

Stitch length is 4mm or less for the AMS-210EN and 3.5mm or less for the AMS-221EN.

AMS-210EN-SS AMS-221EN-HL

Light- to medium-weight Medium- to heavy-weight

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

DP×5 (#14) DP×17 (#18)

AMS-210EN-HS

Medium- to heavy-weight

0.1~12.7mm (0.05mm step)

DP×17 (#18)

2,800sti/min

AMS-221EN-SL

Light- to medium-weight

DP×5 (#14)

Computer-controlled Cycle Sewing Machine with Input Function (name embroidery type)

AMS-210EN-1306/7450

This is the name (alphabetic/Japanese/Chinese characters) embroidering machine which achieves the embroidering-machine industry's highest sewing speed of 2,000sti/min. The sewing machine is a computer-controlled cycle machine provided with an input function. Once the operator places a piece of material on the sewing machine, the sewing machine carries out the entire sequence of embroidering according to the preliminarily input name data from start to the thread trimming under finish in a fully-automatic manner. With this function, the machine enables even an inexperienced operator to beautifully and speedily embroider names with accuracy.

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Storage of pattern data in the memory

Needle

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

AMS-210EN-1306/7450

Standard (light- to medium-weight)

2,000sti/min

X: 130mm × Y: 60mm

0.1~12.7mm (0.05mm step)

DP×17 (#11)

Computer-controlled Cycle Sewing Machine with Input Function (for shape-tacking of jean pockets)

AMS-210ENHL-2210/X90003

Even an inexperienced operator is able to sew shape-tacking of jean pockets only by placing a pocket piece on the sewing machine and carrying out the start operation. Pattern can be changed without using a tool in the case of changing the design, sewing size, etc.

The possible pocket stitching range is 220 mm (W) x 100 mm (L). The stacker is provided for the sewing machine as standard and is able to stack 50 pockets.

Model name

Application

Max. sewing speed

Pocket size

Needle

Thread

AMS-210ENHL-2210/X90003

Medium- to heavy-weight

2,800sti/min

110~220mm (W) × 1110~230mm (L)

DP×17 (#18)

#50~#2

Computer-controlled Cycle Sewing Machine with Input Function (polo-shirts placket device)

〈Single Placket with Top stitch type for mens〉〈Dubble Placket type for mens〉〈Single Placket with Top stitch type / Dubble Placket type for mens〉

AMS-221ENHS-3020

The machine fully automatizes a series of sewing placket processes. The machine carries out a series of placket setting processes at 21 sec/pcs (Single Placket). It achieves 4.7 times as productive as general-purpose machines. This device is able to place a placket on garment body while the machine is still engaged in the sewing of the current placket. This means higher productivity can be achieved simply with one machine.

The machine can sew V-shape stitch, and Dimple-shaped depression by automatic is fewer than by manual work. Topstitch is produced at the place 1.5mm to 3.0mm from the edge of the under placket.

Model name

Description

Application

Max. sewing speed

Needle

Sewing area

Placket material size

AMS-221ENHS-3020/Polo-shirts Placket Device

Single Placket

with Top stitch type

135×17(No. 65〜75), DP×17（＃9〜＃11）

4〜6mm(W) ×

vless than 200mm(L)

90〜130mm(W) ×

less than 235mm(L)

Dubble Placket type

Medium weight

2,500sti/min

20〜50mm(W) × less than 200mm(L)

48〜113mm(W) × less than 235mm(L)

Single Placket with Top stitch type / Dubble Placket type

AMS-210EN-SS1306SA/7450

AMS-210ENHL-2210/X90003

AMS-221ENHS-3020

3231

Page 21

Computer-controlled Cycle Machine Computer-controlled Cycle Machine

Computer-controlled Cycle Sewing Machine with Input Function (Polo-shirts placket with Transport device )

AMS-221ENHS-3020/X90014 AMS-221ENHS-3020/X90026

It is an automatic machine equipped with a transport device to reduce operator's work in polo-shirts placket process. Just by setting the placket with pedal operation and push button, sewing can be done. It is equipped with stacker, we will stack the finished products automatically on the stacker table. It achieves 5.2 times as productive as general-purpose machines. (for Single type)

Model name

Application

Max. sewing speed

Needle

Sewing area

Placket material size

AMS-221ENHS-3020/X90014 AMS-221ENHS-3020/X90026

Medium weight

2,500sti/min

135×17(No. 65〜75), DP×17（＃9〜＃11） 4〜6mm(W) × less than 200mm(L) 90〜130mm(W) × less than 235mm(L)

20〜50mm(W) × less than 200mm(L) 48〜113mm(W) × less than 235mm(L)

(Single Placket with Top stitch type for mens)

(Double Placket for mens)

Computer-controlled Cycle Sewing Machine with Input Function (

for sewing pockets on jeans)〈with presetting device〉

AMS-221ENHS-3020/X90005, X90006 AMS-221ENTS-3020/X90002, X90004

(

2-color-thread sewing

This model is designed for sewing pockets on jeans and is based on the

AMS-221EN Series.

󱾀The machine sews folded pocket cloth on the garment body.

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Storage of pattern data in the memory

Needle

Computer-controlled Cycle Machine with Input Function (for sewing pockets on jeans)

)

AMS-221ENHS-3020

/X90005,X90006

With presetting device

2,500sti/min

Max. 110mm × 110mm

Min. 90mm × 90mm

0.1~12.7mm (0.05mm step)

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 49,950,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

DP×17 (#21) #18~#21

AMS-221ENTS-3020

/X90002,X90004

2-color-thread sewing With presetting device

Computer-controlled Cycle Machine with Input Function (for J stitch)

AMS-221ENTS-3020/X90013

AMS-221ENHS-3020/X90014

AMS-221ENTS-3020/X90013

(

2-color-thread sewing

This model is designed for topstiching front fly on jeans etc and is based on the

AMS-221EN Series. High quality and no need skill J Stitch automatic machine.

It can correspond to various sewing patterns, it prevents displacement by the

vacuum device.

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Storage of pattern data in the memory

Needle

)

AMS-221ENTS-3020/X90013

Heavy-weight

sti/min

2,500

X: 280mm × Y: 100mm

0.1~12.7mm (0.05mm step)

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 49,950,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

DP×17 (#19)

Computer-controlled Cycle Machine with Input Function

AMS-224EN-4530

(

X: 450mm × Y: 300mm)

AMS-224EN-6030

(

AMS-221ENTS-3020/X90002

X: 600mm × Y: 300mm)

The machine achieves the highest sewing speed of 2,500sti/min among those with a similar sewing area. With its higher productivity, the machine performs various kinds of stitching, making the most out of its wider sewing area in various sewing applications such as attaching handles to bags and pouches, attaching belts, sewing many small parts at a time, attaching parts to shoes and sports shoes (one pair of shoes) and sewing air bags.

Model name

Application

Max. sewing speed

Settable stitch length

Storage of pattern data in the memory

Needle

AMS-224EN-HS

Medium- to heavy-weight

2,500sti/min (stitch length 3mm or less)

0.1~12.7mm (0.05mm step)

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

DP×17 (#18)

AMS-224EN-GB

Extra heavy-weight

DP×17 (#23)

Automatic Bobbin Thread Wind-and-Feed Device (Retrofit Kit for AMS-EN Series Shuttle Hook Machine)

AMS-224EN-6030

AMS-221ENHS-3020/7200

This model is designed for sewing pockets on jeans and is based on the

AMS-221EN Series.

󱾀The machine sews folded pocket cloth on the garment body. 󱾀Maximum stitching range of a pocket that can be sewn is

246mm (width) × 200mm (length).

Model name

Application

Max. sewing speed

Sewing area

Stitch length

Storage of pattern data in the memory

Needle

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 49,950,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

AMS-221ENHS-3020/7200

Heavy-weight

sti/min

2,000

X: 246mm × Y: 200mm

0.1~12.7mm (0.05mm step)

DP×17 (#19)

AMS-221ENHS-3020/7200

AW-3S

This is Automatic Bobbin Thread Wind-and-Feed Device that can be

retrofitted to the computer-controlled cycle machine with a semi-rotary hook,

AMS-221EN and AMS-224EN. Improved seam quality, productivity and

operability are achieved by installing this device to the sewing machine!

This device is suitable for the sewing of products

such as air bags, sports shoes and bags.

Device

Sewing machine head to which the device is installed

Applicable bobbin

and bobbin case

Thread

Applicable types of thread

Remaining thread removal

operation, bobbin winding and threading operations

(sewing machine head with a semi-rotary hook)

AMS-221EN / AMS-224EN

Exclusive bobbin and bobbin case

#5~#30, 135~45(TEX), 020~060(TKT)

Tetoron thread, nylon thread

(while the sewing machine is in operation)

AW-3S

Automatic

Example of installation

of AW-3S retrofitted

AMS-221EN

3433

Page 22

Automatic MachineAutomatic Machine

Lockstitch, Automatic Welting Machine

APW-895NS

(

for straight pockets with flaps

)

APW-895NL

(

for straight pockets with flaps, long and wide type

)

APW-896NS

(

for slanted pockets with flaps

The machine supports the sewing of straight pockets (with flaps) on suits, jackets and pants. Double-/single-welt sewing can be changed over by the simple touch of a key on the operation panel.

󱾀The “direct-drive motor”, which transfers the motor power to

the machine with no energy loss, not only offers economical benefits due to the power reduction, but also reduces the machine's vibration and operating noise, thereby helping reduce operator fatigue.

󱾀The machine head is provided with a semi-dry head to

eliminate staining with oil from the frame (the needle bar part).

󱾀The support of long and wide welts is enriched, the machine

can sew large-sized pockets such as pockets on coats.

(APW-896NS)

In addition to the APW-895N’s functions, the APW-896NS supports the sewing of slanted pockets (for sewing slanted flaps). The world’s first computer-controlled sidewise cutting position of the corner knives enables easy adjustments of the knives simply by operating the panel.

Model name APW-895N APW-896N

Flap type

Sewing speed

Kind of welts

Stitch length

Stitch length (fastening stitching)

Corner-knife cutting adjusting method

Needle

Number of independent sewing patterns

Number of cycle sewing patterns

Number of alternate sewing patterns

Model name

APW-895NS

APW-895NL

APW-896NS

With / Without

(corner knife and center knife)

Without

With

Without

With

Without

With

)

Rectangular flap

Max. 3,000sti/min (1,000~3,000sti/min)

Parallel double welt, parallel single welt

Condensation stitching: Standard 1.0mm (0.5~1.5mm) Back-tack stitching: Standard 2.0mm (0.5~3.0mm)

(with / without flaps)

Standard 2.5mm (2.0~3.4mm)

Changeable between condensation / back-tack stitching

Mechanical adjustment Electronic adjustment

ORGAN DP×17 Standard #16 (#14~#18), SCHMETZ 190R Standard #100 (#100~#110)

99 patterns (999 patterns when a CF memory card is used)

Sewing length (welt length)

Min. 18mm~Max. 220mm (settable in increments of 0.1mm)

Min. 35mm When a solenoid valve is used: Min. 21mm

*For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.

Min. 18mm~Max. 300mm (settable in increments of 0.1mm)

Min. 50mm~Max. 250mm (settable in increments of 0.1mm)

Min. 18mm~Max. 220mm (settable in increments of 0.1mm)

Needle gauge 12mm or less: Min. 21mm~Max. 220mm Needle gauge 14mm or more: Min. 50mm~Max. 220mm

Parallel double welt, parallel single welt, slanted double welt,

slanted single welt, trapezoidal sewing (with / without flaps)

20 patterns

Rectangular / Slanted flap

APW-896N

Needle gauge (mm)

8, 10, 12, 14, 16, 18, 20

22, 24, 26, 28, 30, 32

8, 10, 12, 14, 16, 18, 20

Lockstitch Automatic Welting Machine (for straight pockets without flaps)

(

APW-895NE

Economy type

APW-895NE provides excellent performance and high productivity in welting, such as slacks and working pants. It comes with a high-speed machine head that is able to perform sewing at 3,000 sti/min at the maximum. Even an inexperienced operator can easy sewing slacks and working pants by just placing the fabric on the welting machine and carrying out the start operation.

Model name

Sewing speed

Kind of welts

Stitch length

(fastening stitching)

Corner-knife cutting

adjusting method

Needle Number of independent

sewing patterns Number of cycle

sewing patterns Number of alternate

sewing patterns

Model name

APW-895NE (Economy type)

With / Without (corner knife and center knife)

Parallel double welt, parallel single welt(without flaps)

Condensation stitching: Standard 1.0mm (0.5~1.5mm)

Back-tack stitching: Standard 2.0mm (0.5~3.0mm)

*Changeable between condensation / back tack stitching

DP × 17 Standard #16 (#14~#18), 190R Standard #100 (#100~#110)

99 patterns (999 patterns when a CF memory card is used)

Without

With

)

APW-895NE

Max. 3,000 sti/min

Standard 2.5mm (2.0~3.4mm)Stitch length

Mechanical adjustment

20 patterns

Sewing length (welt length)

Min. 18mm~Max. 220mm (settable in increments of 0.1mm)

Min. 35mm When a solenoid valve is used: Min. 21mm

*For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.

AP-895NE

Needle gauge (mm)

10, 12

Jeans Pocket Setter

(

AP-876

full-automatic

The machine automatizes a series of pocket setting processes such as the folding of a pocket, placement of the pocket on a garment body, sewing, bartacking and stacking, thereby increasing productivity and achieving production without requiring the operator to have any special skill. This promises consistent finished quality.

(

AP-874

semi-automatic

This sewing machine is a semi-automatic type pocket setter. The sewing machine has been specifically designed for sewing pockets which have been preliminarily folded in the preceding process on a predetermined location of the garment body without folding the pocket cloths.

Model name

Application

Machine head

Max. sewing speed

Sewing area

Stitch length

Opreration panel

Storage of pattern data in the memory

High-speed, 1-needle, lockstitch, zigzag stitching machine

)

AP-876 AP-874

Full-automatic Semi-automatic

(exclusive machine head)

4,000sti/min

250mm × 250mm

0.1~6mm

IP-420 (large-sized color liquid crystal touch panel)

Max. 999 pattern

AP-876S

Automatic 1-needle Belt-Loop Attaching Machine

AB-1351

AB-1351 is belt-loop attaching machine with the ability to solely sew 12 different belt-loop sewing patterns! This machine not only reduces the time required for the belt-loop attaching process, but also achieves labor-saving, such as the elimination of the previous process (belt-loop cutting). Productivity can be dramatically increased when one operator attends to two AB-1351 units.

Model name

Machine head

Max. sewing speed

Stored bartacking patterns

(Stitches)

Bartacking size length-wise

Bartacking size cross-wise

Needle

Thread

Belt-loop width

(Exclusive machine head based on the LK-1900A, Semi-dry-head)

Linear bartacking (12, 15, 21, 28, 36, 41) /

Zigzag bartacking (28, 36, 42, 56, 64)

0~3.2mm (0"~1/8")〈adjustable in increments of 0.1mm〉

6~23mm (15/16"~57/64")〈adjustable in increments of 0.1mm〉

Spun 80Nm (recommend), Filament 80Nm (80Nm=#50)

AB-1351

LK-1961/ABH

2,500sti/min

DP×17 #14, 135×17 #90

8~20mm (5/16"~25/32")

AB-1351

3635

Page 23

Automatic Machine

Automatic 2-needle Belt-loop Attaching Machine

MOL-254

The machine time is 1.2 seconds per belt-loop, which ensures increased

productivity. The feed mechanism incorporates a computer-controlled

X-Y method to allow the operator to change the number of stitches and

sewing sizes.

Model name

Max. sewing speed

Number of stitches

Needle gauge

Bartacking length

Bartacking width

Belt-loop width

Finished length of belt-loop

Needle

28, 36, 42 (selectable on the operating panel)

〈adjustable in increments of 0.1mm〉

MOL-254

2,500sti/min

40~70mm (1-37/64"~2-3/4")

7~22mm (9/32"~55/64")

1~3.2mm (3/64"~1/8")

9~20mm (23/64"~25/32")

48~78mm (1-57/64"~3-5/64")

DP×17 (#21) #19~#21

Computer-controlled, High-speed, Single-thread Chainstitch, Button-neck-wrapping Machine

AMB-289

The machine demonstrates the highest productivity among

button-neck-wrapping machines intended for men’s and ladies’ outer wear.

A single machine unit permits the quick changeover of types of buttons to be

sewn, i.e., flat buttons, shank button, marble buttons and stay buttons with a

one-touch utility lever.

Model name

Max. sewing speed

Button size

Setting data

Number of data that can be input

Needle

1,800sti/min (neck-wrapping),

Sewing button without neck-wrapping: φ8~φ38mm

Sewing button with neck-wrapping: φ8~φ32mm

Distance between buttonholes: 1.5~6mm (0.1mm step)

Height of neck-wrap: 0, 1.5~10mm

SM×332EXTLG-NY (#14) #12~#18

AMB-289

1,200sti/min (button sewing)

Counter button: φ8~φ25mm

Max. 99 patterns

MOL-254

AMB-289

Automatic Serging Machine

ASN-690

Increased productivity is required in the serging process. JUKI has launched its super-high speed machine developed in pursuit of simple-in-operation and ease-of-use. To fully support the operator so that he/she can carry out serging speedily, the machine comes in two different types; the long-table type and the short-table type which permits easy handling of the material.

Model name

Machine head

Application

Max. sewing speed

Stitch length

Overedging width

Differential feed ratio

Needle

MO-6904S (super-high-speed,

Serging of skirts, pants, jeans, etc.

For stretching 1:0.7 (max. 1:0.6)

Edge Control Seamer

AE-200ANLA AE-200ANLD

AE-200AN is configured with JUKI’s unique sensor and manipulator-control mechanisms allowing inexperienced operators to join materials with different curves with great finesses matching the finished seam quality of highly skilled operators. Large color LCD touch panel IP-420 is adopted. Sewing specifications can be quickly and accurately adjusted via touch panel to meet the requirement of various design changes and which helps operators join materials nimbly and skillfully while enhancing productivity even in sewing processes for custom-designed articles in small lots.

ASN-690

1-needle overlock machine)

8,000sti/min

0.8~4mm

4.0, 4.8, 5.6mm

For gathering 1:2 (max. 1:4),

DC×27 (#11) #9~#14

(Join materials type)

(Pin tuck type)

ASN-690L

High-speed, Computer-controlled Buttonholing Indexer

AC-172N-1790AN

LBH-1790AN, high-speed, computer-controlled lockstitch buttonholing

machine has been combined with a high-performance and highly

accurate indexer.

󱾀“Applicability to vertical stripe patterns has been improved.” The newly-de-

veloped sub-clamp mechanism prevents slippage of the material to enable accurate and consistent buttonholing.

󱾀“Increased productivity achieved by the preset mechanism”

Model name

Machine head

Max. sewing speed

Sewing dimension

Knife size

Feed direction

Number of patterns that can be input

Number of buttonholes

Needle

*The CE type sewing machine is AC-172N-1790.

LBH-1790AN (exclusive machine head for AC)

Standard : Width 4mm × length 25mm

(max: width 6mm × length 120mm by repiacing parts)

Right (for men's garments) or left (for ladies' garments)

AC-172N-1790AN

4,200sti/min

6.4~19.1mm (1/4"~3/4" inch)

20 patterns

1~20 pcs.

DP×5 #11J~#14J

AC-172N-1790AN

Model name

Application

Machine head

Sewing speed

Max. stitch length

Max. top-feed amount

Lift of the presser foot

Needle

Sewing condition

AE-200ANLA

Join materials type (medium-weight) Pin tuck type

DLU-5498N-7 (exclusive machine head for AE-200A)

200~3,500sti/min

4mm

8mm

10mm

DP×1 (#11) #9~#18

(Seam allowance) 1~30mm, (Curve sewing) 100mmR or more (Number of plies) Two or one

AE-200ANLD

AE-200ANLA

3837

Page 24

Automatic MachineAutomatic Machine

Pattern Seamer

PS-800-13085

(X: 1,300mm × Y: 850mm)

PS-800-12080

(X: 1,200mm × Y: 800mm)

PS-800-8045

(X: 800mm × Y: 450mm)

PS-800-6045

(X: 600mm × Y: 450mm)

The dry head machine achieves max. speed 3,000sti/min with supporting various sewing and materials. There are 4 types of sewing areas. The PS-800-8045 can be installed in a space-saving manner. Not only the parts department but also sewing lines can be used.

Model name

Sewing area

Feeding type

Max. sewing speed

Stitch length

Needle

Dimensions

PS-800SB13085 PS-800HB13085

1,300 mm × 850 mm

DB × 1 #8

(7#~ 14#)

2,190mm (W) × 2,100mm (L )

× 1,250mm (H)

PS-800SB8045

800 mm × 450 mm

Double stepping motor Belt Drive

DP × 17 #21

(18# ~23 #)

DB × 1 #8 (7#~ 14#)

1,200mm (W) × 1,325mm (L )

× 1,250mm (H)

PS-800HB8045 PS-800SB6045

600 mm × 450 mm

3,000 sti/ min

0.5 - 12.7 mm

DP × 17 #21

(18# ~23 #)

DB × 1 #8 (7# ~14# )

1,560mm (W)

× 1,200mm (L)

× 1,250mm (H)

PS-800SS12080

1,200 mm × 800 mm

Screw drive (ball screw )

2,180mm (W) × 2,185mm (L )

PS-800HS12080

× 1,250mm (H)

PS-800-12080

DP × 17 #21

(18# ~23 #)

Pattern seamer (X:1,200mm × Y:700mm)

PS-700

This is a pattern seamer provided with JUKI’s first

exclusive machine head. It is able to carry out

pattern sewing of large products with flexibility. The

PS-700 has achieved the industry's highest jump

speed of 800 mm/s.

The auxiliary clamp holds down the cassette clamp

and material, thereby securely holding the material

being sewn.

Model name

Max. sewing

speed

Sewing area

Needle thread tension

Hook

(electronic thread tension control mechanism)

Full-rotary double-capacity hook

PS-700

3,000sti/min

X 1,200mm × Y 700mm

Active tension

Software / System

Programming Software for Computer-controlled Sewing Machines

PM-1

This software is to input and edit sewing data of JUKI’s latest sewing machines.

Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly.

It supports high quality production with high added value by utilizing and creating original data for specific designs and applications.

PS-700

Pattern Seamer

PS-800SB-8045CKZ/X88011

(X: 800mm × Y: 450mm)

This machine is a special model modified for Welting. The dry head machine achieves max.speed 3,000sti/min with supporting various sewing and materials. The PS-800-8045 can be installed in a space-saving manner. The table size width is 1,200mm, the same as 1-needle lockstitch machine.

Model name

Sewing area

Feeding type

Max. sewing speed

Stitch length

Needle

Dimensions

PS-800SB-8045CKZ/ X88011

X: 800mm × Y: 450mm

Double stepping motor Belt Drive

3,000 sti/min

0.5 - 12.7 mm

DB × 1 #8 (7#~14#)

1,200mm (W) × 1,325mm (L)

× 1,250mm (H)

PS-800SB-8045CKZ/ X88011

System Formation

IP-500

IP-420IP-500 IT-100NFC Panel

USB

Personal computer

The sewing machine can be paired with equipment which supports NFC (Near Field Communication)

CompactFlash™ or CFA specification compatible media. “CompactFlash™”is a registered trademark of SanDisk Corporation, U.S.A. Other company names and product names/brand names are trademarks or registered trademarks of the respective companies.

CompactFlash

4039

Page 25

Software / System

Equipment operation management system

Ongoing work on the factory floor is visible, IoT leads to a bright future

JaNets JT SimpleJaNets JT Simple

The productivity of your factory can always get better!

The first step to increasing productivity is to know the status of your sewing factory now.

Poor line balance*2!

Wasteful work*1!

Wasted time and effort

looking for a fabric

JaNets is JUKI-provided IoT service to help customers increase productivity.

Seeing your

line status in

real time

See processing times

instantly!

カタログPDF

you can instantly find the parts of your factory you need to improve!With

Operation rates are clear to See!

With JaNets, you can track operation metrics that

you could only grasp with your senses before.

See the progress

of your line in real time!

See sewing machine

troubles instantly!

With JaNets, you can check which equipment

has failed or caused irregular tasks, how often

the failures and tasks have taken place, and

for how long.

See your output

quantities!

Operator’s skill unknown!

Production targets missed!

Wasted time waiting for workWasted transport distance

Factors

that reduce

With JaNets, you can check how much time an

operator spends working on a garment.

Finding machine failures takes time!

With JaNets, you can check your production

progress without spending man-hours.

With JaNets, you can check the target/actual

output quantity of each piece of equipment.

factory

productivity

Improvement

Increased

Targets

Manual data collection takes time!

Other advantages JaNets provides

Reduced waste

Factory operators

with enhanced awareness

Increase the productivity of your factory further!

productivity!

Enhanced responsiveness

to labor shortages

*1 Idle waiting time and irregular tasks (e.g., thread changing) that divert the operator from sewing, preparing, and handling materials.

*2 Operators working at different speeds. When your factory line is in good balance, your operators work at a uniform speed.

When the balance is poor, a delay by one operator slows the next processes down the line.

Why not get started with JUKI?

Contact JUKI to learn more about JaNets!

Website

4241

Page 26

Type Of

Quotation

Status

CSV export

Product Name

Maintenance record

JUKI-ShuHaRi

Replacement Part

Work

Time

Software / System Software / System

Sewing machine inspection support system

JUKI-ShuHaRiJUKI-ShuHaRi

JUKI-ShuHaRi is a cloud-based “sewing machine

inspection support system” consisting of the ShuHaRi

app that supports operators with daily sewing machine

inspections and the JUKI-ShuHaRi cloud service that

allows maintenance managers to keeps track of the

sewing machine inspection status.

service

Smartphone app

for supporting job site works

Inspection management

Daily inspection

Simple diagnosis

Daily inspection

The sewing machine inspection takes only five minutes a day!

JUKI-ShuHaRi provides step-by-step instructions and important points with pictures to guide the operator along the way. The operator performs an inspection simply by following the instructions by the Shuhari app on his or her smartphone screen. The entire daily inspection takes only about five minutes per machine.

Daily inspection

Free registration

How to use the JUKI-ShuHaRi sewing machine inspection support system

JUKI-ShuHaRi application form

https://www.juki.co.jp/industrial_j/service_j /shuhari_en/form.php

Enter required items in the usage application form on the JUKI website.

You will receive an email notification after your registration is completed.

Cloud

Personal computer

software for supporting

management work

Specifications

JUKI-ShuHaRi is a cloud-based system that can be used only by connecting your smartphone and PC to web browsers without installing software. No need to hassle with software installations. It should be noted that the factory’s in-house Wi-Fi has to be used for communication within the factory.

The email provides the URL of the ShuHaRi app download page and the

URL of the JUKI-ShuHaRi cloud service website.

Access the JUKI-ShuHaRi cloud service website from your personal

computer to add presumed users in your factory. Users added afterwards will also receive email notifications.

Download the ShuHaRi app from the notification email and start using it.

Support of the inspection work with the ShuHaRi app

Operators in the production site may be in charge of daily inspections from tomorrow

Maintenance record

No need for preparation of reports on the inspection results!

Inspection results and parts- replacement histories are saved in the maintenance records automatically. The operator no longer needs to prepare daily reports.

Daily inspection

Maintenance record

Daily inspection

Estimate for spare parts

Periodical inspection

NG OK

Periodic inspection

With the JUKI-ShuHaRi, the maintenance manager is able to carry out periodical inspections with ease

JUKI-ShuHaRi also supports the periodical inspection (once a month, three months or six months) that is carried out thoroughly by the maintenance manager. Many of sewing machine parts are consumable. It is therefore necessary to carry out periodical inspections in order to use the sewing machine for a long time with care. JUKI-ShuHaRi provides easy-to-understand guides about complicated inspection points of the sewing machine by the Shuhari app on the smartphone.

Functions available to the

Service functions

administrator

System setting User setting

JUKI-ShuHaRi cloud service supports the maintenance management!

Spare parts estimation

Replacement parts are automatically selected! Ordering errors and unnecessary parts cost are reduced

If the inspection shows that a certain part needs to be replaced, the target replacement part and part number are automatically displayed on screen. Any operator using the app can select the correct replacement part. The part number is automatically saved in the maintenance records.

All maintenance-related information are listed on tables to ensure easy maintenance management!

Sewing machine condition management Management of spare parts and parts ordering

Condition of sewing machines in possession can be grasped real time

Inspection results, inspection history, parts- replacement aggregated data and ordering data can be seen and the accumulated information can be managed collectively on the personal computer. The efficiency of sewing machine management work rises dramatically.

Maintenance records list

Person In Charge Of WorkDate And Time Of

Execution Of Work

Retrieval

Type Of Inspection

2020/11/172020/10/18

Presence/Absence

Of Faulty Part

Order placement for parts and spare parts management are easily handled

The parts requested by operators with their ShuHaRi apps are collectively managed on a list. The parts requested by the operators are checked against the inventory to accurately grasp the required quantities, enabling requests for collective quotes from parts manufacturers. This contributes to the reduction of the occurrence of ordering mistakes and cost losses.

Quotation request list

Select Date Of Request Requested By Requested To

Catalog PDF

Easy to get quotations and order parts!

A human resource development program designed for the sewing industry

JUKI e-learning

JUKI -learning

Learning the essential basics in the sewing industry

Many people are working in sewing-related industries around the world. Yet surprisingly few

teaching materials have been developed to provide basic knowledge on sewing machines and

sewing technology. Sewing machine operators therefore tend to be self- taught. The basic

JUKI -learning

knowledge and skills acquired through can be immediately applied to daily work.

Gaining knowledge and experience from the online learning system

The program has been developed based on accumulated know-how and

JUKI -learning

experience JUKI has acquired in technical training and management training over its long

history. With easy-to-understand videos and narrations, training participants can seamlessly

learn wide-ranging topics and skills. At the end of each chapter, the participant takes a test to

confirm how well he/she understands the content.

Two different types of training are provided: Customers can select the type that suits your condition.

Learning individually! Learning together!

Individual training type Group training type

The individual training type is

provided in a standard e-learning

format. The training participant takes

the individual e-learning courses using

Individual PC, tablets or smartphone.

The management user can manage

his/her progress on the web.

The Individual e-learning training is recommended

for the following customers

Customers who Customers who can prepare an internet connection and device for every training participant.

cannot provide group

training because of

heavy workloads and

restrictions on

gatherings during the

coronavirus pandemic.

Customers with many employees spread across multiple remote locations.

Individual training type [monthly fee system] Group training type [monthly fee system ]

Management fee

Course

learning period

＋

Course fee

Number of

participants

󱾀This is the fee for using the system with manage-

ment user privileges. (At least one management user account is required for each application.)

󱾀With management user privileges, the progress of

the participants (learning status, test scores, etc.) can be managed.

󱾀This is the fee for a training participant account.

(The customer needs to create an account for every participant who takes the course.)

󱾀An individual ID is issued to each participant

account. The participant can take the course as many times as he/she wants using his/her ID within the contract period.

Examples of courses offered

Sewing Operator Training course

Japanese

Five

chapters

in total

English Vietnamese

Apparel industry and apparel production

Chapter 1

Basic knowledge of needles, threads and

Chapter 2

sewing machines

Operation and adjustment of lockstitch

Chapter 3

sewing machines

Chapter 4

Practice for lockstitch sewing machines

Operation and adjustment of overlock

Chapter 5

sewing machines

Content for “practical exercises” can be found in Chapter 4.

★

The training participant carries out hands-on practice using sewing practice sheets provided separately.

Basic Knowledge of Sewing - Lockstitching course

Japanese

Eight

chapters

in total

Additional courses will be provided, one by one!

Contact the JUKI office in your area for information about non-supported languages.

󱾀

English Vietnamese

Introduction

Chapter 1

Chapter 2

Chapter 3

The group training type is

provided in a lecture format

using materials.

JUKI -learning

The group training is conducted

with a large number of

participants at the same time. To carry out group training, an

instructor has to be prepared within the customer’s company.

The Individual e-learning training is recommended

for the following customers

Customers who cannot provide separate Internet connections and devices for all of their training participants.

Package fee

Customers who want to provide all of the training in a single session to lower their costs.

󱾀Contract period: At least one month

󱾀Number of participants: Unlimited

course,

Feed mechanism

six major elements of machine sewing

Needle bar

Hook

Thread take-up

Chapter 4

Chapter 5

Chapter 6

Chapter 7

Presser foot

Thread tension control system

Summary

As of January, 2022

QR code or URL below.

https://www.juki.co.jp/industrial_e/

service_e/elearning/form.php

Catalog PDF

When a customer wants to provide training in an unsupported language,

the customer’s instructor

will translate the e-learning materials to be used for the training.

To apply for the

-learning

eJUKI

please use the

Application form

4443

Page 27

Option Parts Option Parts

Option Parts

Plastic BobbinPlastic Bobbin

Fusion of function and strength. Reinforced plastic bobbin made in Japan with excellent durability and strength.

JUKI’s new reinforced plastic bobbin

will help you to solve the problem.

󱾀It takes time to adjust the thread tension. 󱾀Irregular stitches on light-weight materials. 󱾀Stitching is unstable at high and low speeds. 󱾀Loose stitches at the start of sewing.

Applicable model

For lockstitching

For 2-fold hook lockstitching

For 2-needle

For Zigzag/ Button hole

For bar tacking

For computer-controlled cyde machine

Set part No.

(10pcs.) Blue

40244783

40244784

40244785

40244786

40244787

40244788

Set part No.

(10pcs.) Red

40245124

40245125

40245126

40245127

40245128

40245129

Reduction of weight

Since the plastic bobbin is lighter than

aluminum and iron, the thread tension

is stable at a high level. Furthermore, it

realizes beautiful stitching.

High durability

Since there is almost no rubbing inside

the bobbin case, it is as durable as

aluminum and iron.

Set part No.

(10pcs.) Yellow

40245136

40245137

40245138

40245139

40245140

40245141

Reduction of running idle

Thread bending that occurs after

intermittent stitching or thread trimming

is reduced. Needle thread tension at

the start of sewing is reduced, and

stitching is more stable. It also reduces the eﬀect of the remaining bobbin

thread amount on the thread tension.

Ti-Mo-N Coating Looper

Better Frictional Resistance, Better Thread Slip, New Loopers from JUKI

Ti-Mo-N film surface treatment on the loopers provides low friction and wear

resistance. Smooth thread feeding improves the quality of sewing.

Long Life

Ti-MO-N film is a kind of titanium alloy

coating film, which achieves long life like

TiN or TIAIN. The surface is covered with

a film with high hardness to prevent wear.

Low Resistance

No. of Ti-MO-N

coating part

40237550

40237551

40237552

40237553

40237556

40237557

40237559

40246367

40246368

40246369

40246467

40246468

40247112

40249863

40257763

40257815

40257816

No. of standard part Part name Applicable model

12968509

12968806

12969101

B2030481000

13424809

12120705

13337902

B242621000B

B242621000D

B242621000F

11999307

12176004

12176103

B2426280000

12176202

11991908

11999802

Wear Test of Thread Path

Under the conditions of thread winding

speed of 2m/s and sliding distance of

200m, spun threads were impregnated

with a brasive to promote wear.

LOOPER L

LOOPER R

LOOPER C

LOOPER

CHAIN LOOPER

LOOPER

NEEDLE HOLE GUIDE D=2.0

NEEDLE HOLE GUIDE D=2.4

NEEDLE HOLE GUIDE D=3.0

LOWER LOOPER

UPPER LOOPER

NEEDLE HOLE GUIDE

UPPER LOOPER

LOWER LOOPER

MS-1261 / MS-1261M / MS-1261A

MH-480 Series

MF-7900, MF-7200D Series MO-6△16

MF-7500 Series

AMS-E/EN Series

MO-6700 / MO-6900S Series

LK-1900BN Series MO-6△16 (for high lift model） MO-6△04, 6△14 (for high lift model）

MO for thick thread

Catalog PDF

Pack of 10 bobbins

Catalog PDF

Bird-Nest Prevention Device for DDL lockstich machine

The quality of lockstitch at the start of sewing is improved. It can be easily retrofitted and is effective for

“bird’s nest prevention” at the start of lockstitch.

This is an optional device that can be retrofitted to prevent the “bird’s nest”

that occurs at the start of sewing in the thread trimming machine.

The processing process such as thread trimming at the start of sewing part

can be omitted, and productivity is improved. Since the needle thread after

thread trimming is clamped, the start of sewing is stable even when sewing

is started from the edge of the material.

List of Optional presser foot for Bird’s nest prevention device

(JSH-PBNB01 /JSH-PBNS01/ JSH-8000APBNB01/JSH-8000APBNS01)

No. PART No. DESCRIPTION

JSH-001-11A

JSH-001R1-4

JSH-001R1-8

JSH-001R3-16

JSH-001L1-4

JSH-001L1-8

JSH-001L3-16

JSH-001R1-16

JSH-001L1-16

JSH-001R1-32

JSH-001L1-32

JSH-001AR1-16

JSH-001AR1-32

JSH-001AL1-16

JSH-001AL1-32

JSH-001AR1-4

JSH-001AR1-8

JSH-001AR3-16

JSH-001AL1-4

JSH-001AL1-8

JSH-001AL3-16

12-15

X3 X3

Flat presser (Standard Presser Foot)

Presser foot with fixed guide (1/4, right)

Presser foot with fixed guide (1/8, right)

Presser foot with fixed guide (3/16, right)

Presser foot with fixed guide (1/4, left)

Presser foot with fixed guide (1/8, left)

Presser foot with fixed guide (3/16, left)

Presser foot with fixed guide (1/16, right)

Presser foot with fixed guide (1/16, left)

Presser foot with fixed guide (1/32, right)

Presser foot with fixed guide (1/32, left)

Presser foot with moving guide (1/16, right)

Presser foot with moving guide (1/32, right)

Presser foot with moving guide (1/16, left)

Presser foot with moving guide (1/32, left)

Presser foot with moving guide (1/4, right)

Presser foot with moving guide (1/8, right)

Presser foot with moving guide (3/16, right)

Presser foot with moving guide (1/4, left)

Presser foot with moving guide (1/8, left)

Presser foot with moving guide (3/16, left)

2-7

X1 X1

X2 X3

16-21

X X

X2 X3

X X1

X1 X1

1.8

X X

C C

X2 X2

X3 X3

Sample installation of bird’s nest prevention device

SIZE

X2 X3 Y

6.4

3.2

4.8

6.4

3.2

4.8

1.6

0.8

6.4

3.2

4.8

6.4

3.2

4.8

8-9

Catalog PDF

4.4

4.45

4.8

10-11

X X

X1 X1

X2 X2

X3 X3

4645

Page 28

Option Parts Option Parts

DDL-9000C Series Optional ItemsDDL-9000C Series Optional Items

Proposing Optional DDL-9000C Items that Further Improve Productivity and Sewing Quality

Applicable Models

Premium Digital

Digital

List of DDL-9000C series optional products

No. Parts no. Description Full-digital Digital

40188622

①

40194389

②

JSH-PBNB01

③

JSH-PBNS01

40065571

④

40065552

⑤

22970404

⑥

40206843

⑦

40174617

⑧

40257811

⑨

MAS07300AA0

40172389

40197869

⑩

40209906

⑪

40209907

DDL-9000C-FMS

(Medium-weight / Semi-dry)

DDL-9000C-FSH

(Heavy-weight / Minute-quantity lubrication)

DDL-9000C-SMS

(Medium-weight / Semi-dry)

DDL-9000C-SSH

(Heavy-weight / Minute-quantity lubrication)

THICKNESS SENSOR ASM.

MICRO LIFTING DEVICE ASM. FOR S

BIRD NEST PREVENTION DEVICE (Backhold type)

BIRD NEST PREVENTION DEVICE (Side-mounted type)

ELECTRIC FAN HOOK COOLING DEVICE

THROAT PLATE SCREW (Fixed pin type)

NEEDLE BAR THREAD HOOK

KNEE TYPE LIFTING DEVICE (Electronic control)

AUTO-LIFTER AK-154 (foot-pedal type)

3-POSITION PRESSER FOOT HOLDER (For DDL-9000C-F)

3-POSITION PRESSER FOOT HOLDER (For DDL-9000C-S) Presser bar cap (for Full-digital)

SUPER SHORT THREAD GAUGE SET (4-row)

PARTS KIT_9000C_S (ACC) (S-type: Midium)

PARTS KIT_9000C_H (ACC) (H-type: Heavy)

〇 Can be fitted ― Not applicable

Standard

Digital

〇 ― 〇〇〇〇

Standard

〇 ― 〇

〇(S-type only)

〇〇

Manual

〇(S-type only)

LK-1900 Instant Button Sewing Clamp Kit

This is a conversion kit from a bartacking machine to a button sewing machine.

Various button sizes can be supported. (Outer dia. 8 to 21 mm, thickness 1 to 4.5 mm can be sewn up to a hole spacing of 4.5 mm)

Since the presser foot pressure is concentrated on the tip of the button clamp jaw lever, sewing defects due to displacement of the

material are eliminated.Since the presser foot operates vertically, there is no deviation of the button center position due to the

thickness of the material.

Bartacking process

DDL-9000C

〇〇〇〇〇〇〇

〇 ― 〇 ―

〇〇

Standard accessory

Applicablemodels

LK-1900BNLK-1900B

LK-1900ANLK-1900A

❸❹ Extra small thin button

Button Sewing Clamp Kit Button sewing process

VERTICAL_BUTTON_

❶

ATTACHED_DEVICE

FEED_PLATE_A

❷

Simply

replace!

❺❻ Middle & Large thin button

❼❽❾ Button floating dev.

Catalog PDFCatalog PDF

Besides the catalogs, we ask you to purchase the following products.

22890206

⑫

22890404

⑬

27003557

⑭

27003755

⑮

27003805

⑯

RP HOOK (Dry-hook) RP HOOK-C (Dry-hook/with needle guard)

HOOK ASM. (for No-rotation bobbin)

BOBBIN CASE ASM. (for No-rotation bobbin)

NO-ROTATION BOBBIN

〇〇〇〇〇

LK-1900 Shorter Thread remaining Kit

The thread trimming work in the bartacking process can be eliminated. It can be easily retrofitted and the productivity of the bartacking process increases.

The shorter-thread remaining function can be added to your sewing machine only

by replacing with the dedicated throat plate kit. The length of the needle thread

remaining on the back side of the material at the end of sewing is 2.5 mm or less

on average.

It eliminates the need for thread trimming operation and gives soft and smooth

feeling on the bartacking sections where directly contact skin such as underwear

and other items.

Modified parts on a model basis List of consumables

Applicable models Sewing category Part Number Part Name Part Number

LK-1900A / 1900AN / 1900B / 1900BN

LK-1903A / 1903AN / 1903B / 1903BN

• In the case of a button sewing machine, it is necessary to replace the shorter-thread remaining throat plate kit and the dedicated needle hole guide.

• All applicable models require special software

Standard (S)

Heavy-weight materials (H)

Button sewing

40193911

40194944

40193911

40193915

Moving knife Ⓐ Fixing knife Ⓑ

40193905

40193912

40193909

40193914

40193915

〇〇〇〇〇

(S Spec)

(H Spec)

(Button sewing)

Catalog PDF

❿ Boss guide ⓫ For LK-1900A

Button Sewing Clamp Kit Parts List

No. Part Number Part Name

❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❾ ❿ ⓫ ⓬

40205494

72002988

72005816

72005817

72005821

72005822

72003011

SS6080340SP

WP0370316SD

MAZ15601000

72002987

40021011

VERTICAL_BUTTON_ATTACHED_DEVICE

FEED_PLATE_A

SPRING_LEFT_B

SPRING_RIGHT_B

SPRING_LEFT_C_ASM

SPRING_RIGHT_C_ASM

BUTTON_RISING_BAR

SCREW 1/8-44 L=2.9

WASHER 3.7x8x0.3

GUIDE

LENGTHWISE_FEED_SENSOR_SLIT

SMALL_GAUGE

4847