JUKI ACF-172-1790 Instruction Manual
No. 00
TABLE OF BASIC OPERATION FOR ACF-172-1790
PANEL BASIC OPERATION
1. Performing sewing
Operation
1. Turn ON the power
switch.
2. Confirm the pattern
No.
3. Press READY key.
4. Start sewing.
Panel display and the description
Data input screen is displayed.
Confirm No. of ACF PATTERN
SELECTION button (A).
Press READY key (B).
/ Automatic sewing screen
appears.
Set the sewing products and
press knee switch or hand
switch.
<Data input screen> <Power OFF prohibition screen> <Automatic sewing screen>
A
B
40016837
(Caution) Be sure to read safety instructions before using.
2. Performing re-sewing from some stop point in sewing
Operation
1. Stop switch is pressed during starting of sewing
machine.
2. Release the error.
3. Return stitching.
4. Re-start sewing.
Panel display and description
Sewing machine stops and error is displayed.
Press RESET button (C) to release the error.
button (D) / returns stitch by stitch.
button (E ) / advances stitch by stitch.
button (F ) / feeds cloth to the left.
button (G) / feeds cloth to the right.
Set the sewing products and press knee switch or hand switch.
G
F
C
E
D
3. When bobbin thread runs out and count-up screen is displayed
Operation
1. Press CLEAR button.
2. Replace bobbin with a new
one.
Press CLEAR button (H) in the count-up
screen.
(Caution) Turn OFF the power and replace the
bobbin after confirming that motor has stopped.
Panel display and description
H
4. When warning screen of oil replacement is displayed
Operation
1. Warning screen is displayed.
2. Clear the warning time.
3. Lubricate the sewing machine
to fill the need.
The screen is displayed when the designated
oil replacement time is reached.
Press CLEAR button ( I ).
(Caution) Turn OFF the power and lubricate
after confirming that motor has stopped.
Panel display and description
I
<Data input screen>
H
M
N
K
I
TABLE OF OPERATION BUTTON AND DISPLAY
FEDCBA
L
G
J
A
BOBBIN WINDING button
B
PRESSER DOWN button
C
EQUAL INTERVAL INPUT button
D
ACF PATTERN NAME SETTING button
E
ACF PATTERN COPY button
F
ACF PATTERN NEW REGISTER button
G
CHANGEOVER OF ACF MODE AND LBH MODE button
H
ACF PATTERN SELECTION button
I
PATTERN (BUTTONHOLE) NO. INPUT button
J
FEED AMOUNT INPUT button
K
SEWING ORDER display
L
ACF PATTERN NAME display
M
NUMBER OF REGISTER BUTTONHOLES display
N
MEN'S/LADIES' WEAR SELECTION button
<Automatic sewing screen>
H
O
T
Q
R
P
CBA
G
BOBBIN WINDING button
A
PRESSER DOWN button
B
KNIFE CANCEL button
C
CHANGEOVER OF ACF MODE AND LBH MODE button
G
ACF PATTERN NO. display
S
Ｈ
ACF PATTERN CONTENTS display
Ｏ
CONTENTS OF PATTERN (BUTTONHOLE) DURING SEWING display
Ｐ
COUNTER display
Ｑ
COUNTER CHANGEOVER button
Ｒ
SEWING SPEED variable resistor
Ｓ
MANUAL SEWING CHANGEOVER button
Ｔ
<Manual sewing screen>
H
O
T
U
Q
R
P
FDCBA
S
W
V
A
BOBBIN WINDING button
B
PRESSER DOWN button
C
KNIFE CANCEL button
D
CARRIAGE TILT/LIFT button
F
SEWING MACHINE START button
H
ACF PATTERN NO. display
O
ACF PATTERN CONTENTS display
P
CONTENTS OF PATTERN (BUTTONHOLE) DURING SEWING display
Q
COUNTER display
R
COUNTER CHANGEOVER button
S
SEWING SPEED variable resistor
T
CLOTH FEED, RIGHT button
U
CLOTH FEED, LEFT button
V
ONE STITCH RETURN button
W
ONE STITCH FEED button
※ For the details, refer to the Instruction Manual.
03 · 10 Printed in Japan (E)
Loading...