Juice Goose SCV-20001 Data Sheet
V
Series 120/120VAC
Standard 1000VA, 2000VA & 3000VA Universal Tower/Rack Mount
LB Extended Models 900VA, 1700VA & 2500VA
On-line, Single Phase, Double Conversion UPS
The UniStar® V features a eld-proven Digital Signal Processor (DSP) achieving high reliability, while providing
protection from electrical power disturbances to the connected load. The convertible tower/rack design oers
maximum exibility, enabling UPS integration into a wide variety of environments.
Industry-leading functionality is standard and includes hot swappable battery, powerful internal charger,
emergency shut-down and programmable receptacles. The UniStar® V is an ideal power protection solution for
servers, networks, telecommunications, industrial equipment, and manufacturing processes. LB Models are for
those critical applications that require extended battery backup times.
True Double-Conversion
On-Line UPS
n
A true double conversion UPS will provide
clean, high level quality power to fully protect mission-critical devices such as sensitive networks, small computer center servers,
telecom applications, as well as for industrial applications.
Output Power Factor 0.9
n
UniStar Series V is a high-density UPS with an output power factor 0.9 to provide higher performance and eciency to critical
applications.
User-Friendly and Easy-Shift LCD Display
n
The front panel digital display can be easily shifted through LCD setting to suit the installation format,
Tower or Rack mount
Rack/Tower Design
n
The Series V is designed in a true universal-mount case. It can be easily installed as a free-standing tower or in a 19-inch rackmount
conguration.
Programmable Power Management Outlets
n
With programmable power management outlets, users can easily and independently control load segments. During power failure,
this feature enables users to extend battery time to mission-critical devices by shutting down the non-critical devices.
50/60 Hz Frequency Converter Mode
n
Lock output frequency at 50Hz or 60Hz to suit power sensitive equipment.
ECO and Advanced ECO Mode for Energy Saving
n
It allows the UPS to operate in high eciency up to 97% in energy-saving ECO mode. In this operation mode, load is supplied
by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected
systems. The Series V even oers advanced ECO mode to allow UPS to operate at higher eciency up to 98%.
Emergency Power O Function (EPO)
n
This feature can secure the personnel and equipment in case of res or other emergencies.
Hot-Swappable Battery Design
n
Ensures clean and uninterruptible power to protected equipment during battery replacement.
www.stacoenergy.com
Your Tailored Power Solutions Provider
TM
On-Line, Single Phase
UPS System
The UniStar® V represents the latest in single-phase
technology at an aordable price. Its true on-line
performance provides a constant clean, steady sine wave
safeguarding the most sensitive equipment.
Applications
n
Broadcast
n
Processing Manufacturing
(food/beverage,
pharmaceutical, plastics,
packaging)
n
Water and
Waste Water Treatment
n
Hospitals/Medical
n
Education/Research
Laboratories
Double Conversion
The UPS provides clean AC power with
voltage and frequency independent
from the utility. On-line technology com-
pletely regenerates utility power
to correct electrical disturbances in the
mains.
High-Eciency and Protection
PWM sine-wave topology yields
excellent overall performance. The high
crest factor of the inverter handles all
high in-rush current loads without the
need to upgrade the power rating.
Wide frequency and voltage windows
of 40-70Hz and 55-150Vac (for 120Vac
input), or 110-300Vac (for 230Vac input), are
provided, which help to extend the life of
the battery.
Near unity input power factor meets
today’s industry standard for energy savings
and eciency with low current harmonic
pollution to the utility.
To protect the unit from overloading, the
UPS will automatically switch to by-
pass mode in 30 seconds if loading is at
105%~120% of rated capacity.
It will automatically switch back
to inverter mode once overload
condition ceases. Selectable bypass input
voltage tolerance (low/high sensitivity)
prevents under or over voltage being
supplied to the loads while in bypass
mode.
User Controls
An easy-to-read user-friendly LCD display
provides real-time indication of all major
system parameters and status, including
load level, battery remaining, and fault
signals for easy service.
Digital signal processing (DSP) also
provides the UPS with powerful com-
munication capability, which enhances
the exibility for easy remote control and
monitoring.
Features
DC-start function ensures the start-up of
UPS even during power outages.
Programmable receptacles oer the
capability to load shed during any power
interruption, while in battery power mode
or during overload condition, via the use of
special communication software provided,
thus reserving backup power for
priority loads.
Emergency shutdown control through
EPO allows users to shutdown the UPS
completely in an emergency to ensure a
safe operating environment.
Staco Energy Products Co.
Communication software allows not
only the control of the UPS and its smooth
shutdown when utility fails, but also allows
the user to:
n
Completely test the major operating
functions of the UPS
n
Communicate via SNMP/Web/
Network adapter
n
Access UPS functions via the Web
n
Alert users via SMS messages against
specic events
Custom options slot allows further exi-
bility in network conguration.
An internal WEB/SNMP card, USB card, and
True Relay card provide isolated contacts
for industrial and remote alarm panel
application.
are shown in the table below. Back-
up time is for the battery pack used
with the UPS internal batteries.
Battery packs are external and hot
swappable.
Optional Make-Before-Break
Bypass Switch—manually operated,
external—ensures continuous supply
of power to the critical load in the
event of unexpected or scheduled main-
tenance.
Three Year Warranty
Electronics:
A full Three Year parts with depot repair or
replacement warranty is standard.
Battery:
A full One Year Warranty on the Battery System
ensures that your batteries are protected from
system failure now and in the future. (Warranty
provided by battery manufacturer.)
Extended warranties, customized
service plans and preventative
maintenance are also available.
Please refer to our warranty statement
for complete details.
User-friendly Plug-and-Play design
allows hassle-free installation. All units up
to 3000VA are supplied with input cables
and output receptacles as standard.
Innovative battery management cir-
cuit analyzes battery discharging status to
adjust battery cut-o point and extend the
batteries’ life span.
Internal maintenance-free sealed VRLA
batteries minimizes the need for frequent
after-sales service. The hot swappable bat-
tery feature allows users to replace the bat-
teries without the hazard of electric shock,
while the UPS supplies power continuously
to critical load applications.
Built-in Charger provides ability
to re-charge internal battery to
approximately 90% in four hours.
Matching battery cabinets are available
to extend the UPS runtime easily to
several hours.
Optional extended runtime
capability by simply connecting
additional battery packs. Just plug in the
battery connectors between the
UPS and battery packs without the require-
ment for additional chargers.
Optional Maintenance Bypass
Model Number Rating Input Connection Output Receptacles
USC-MBPDU-11RT 1000VA & 900VA Attached 6' Cord with
USC-MBPDU-21RT 2000VA & 1700VA Attached 6' Cord with
USC-MBPDU-31RT 3000VA & 2500VA Attached 6' Cord with
Dimensions: 3.50" H x 17.30"W x 3.00"D (2U) / [88.9 x 439.4 x 76.2]
5-15P
5-20P
L5-30P
UniStar V Series, Universal Rack/Tower Mount
120VAC, 1000VA, 2000VA & 3000VA & LB Models, 900VA, 1700VA & 2500VA
UPS On-line, Double-Conversion – LCD Panel, USB and RS-232 Standard
Model Number
SCV-10001
SCV-20001
SCV-30001
SCV-10001-LB
SCV-20001-LB
SCV-30001-LB
Standard Models: Maximum (1) External Battery Pack (SCV-BAT-1K, SCV-BAT-2K or SCV-BAT-3K)
LB Models: Maximum (5) External Battery Pack (SCV-BAT-1K, SCV-BAT-2K or SCV-BAT-3K)
Note: 1. LB Models do not have internal batteries.
2. Unit ships with bundled NetAgent 9 Shutdown Software.
3. All units ship with floor stand and rack mount hardware.
*Always reference Spec Control Drawing (SCD) for the most current & accurate dimensions and weights
VA/
Watts
1000VA / 900W 2.7 5-15P (4) 5-15R
2000VA / 1800W 2.7 5-20P (8) 5-20R
3000VA / 2700W 2.7 L5-30P
900VA / 810W 0 5-15P (4) 5-15R
1700VA /1530W 0 5-20P (8) 5-20R
2500VA / 2250W 0 L5-30P
Internal
Battery
(Minutes)
Input
Cord
Output
Connection
(4) 5-20R &
(1) L5-30R
(4) 5-20R &
(1) L5-30R
H" x W" x D" / [mm]
3.39" x 17.24" x 16.44" (2U)
[86.2 x 438.0 x 417.5]
3.39" x 17.24" x 20.38" (2U)
[86.2 x 438.0 x 517.5]
3.39" x 17.24" x 27.74" (2U)
[86.2 x 438.0 x 704.6]
3.39" x 17.24" x 16.44" (2U)
[86.2 x 438.0 x 417.5]
3.39" x 17.24" x 20.38" (2U)
[86.2 x 438.0 x 517.5]
3.39" x 17.24" x 27.74" (2U)
[86.2 x 438.0 x 704.6]
(8) 5-15R
(6) 5-15R & (2) 5-20R
(4) 5-15R & (1) 5-30R
*Dimensions
*Wt.
lbs. / (kg)
29 / (13)
47 / (21)
65 / (29)
20 / (9)
28 / (13)
33 / (15)
Extended run time battery packs
are available for all models.
Size, capacity, and estimated run times
UniStar® V Rack/Universal
www.stacoenergy.com
Loading...