JuiceGoose PD3 User Manual
OTHER GREAT PRODUCTS
POWER DISTRIBUTION
JG SERIES – Five great models to
choose from. All include basic spike
and line noise protection and rotated
outlets to accommodate walls wart.
Options include slide out lights and a
voltage meter.
RP SERIES – Professional grade 19”
rack mount power distribution products
for more demanding situations. Features a strong “Tour Class”TM chassis,
10 or 11 outlets and multiple stage
spike and EMI filtration. Options include lights and meter.
POWER SEQUENCING
CQ SERIES – AC power remote control
and sequencing made easy and affordable. Select from 8 different components to build small or large sequencing systems. No master controller required.
UPS – BATTERY BACKUP
Juice Goose is a distributor of great
UPS systems manufactured by Liebert,
a respected name in data power systems support. Models include stand-by
and on-line designs in a full range of
prices.
INSTALLATION
INSTRUCTIONS
October 2003
PD3
MULTIPLE CIRCUIT
POWER DISTRIBUTION
FOR MORE
INFORMATION
PLEASE
CONTACT
JUICE GOOSE
AT
WHITENTON INDUSTRIES
7320 ASHCROFT
SUITE 104
HOUSTON, TEXAS
77081
PH: 713-772-1404
FX: 713-772-7360
E: info@juicegoose.com
WEB: www.juicegoose.com
GENERAL WIRING DESIGN
The PD3 is configured, within the bounds of
certain design constraints, to custom specifications.
The PD3 includes multiple, single phase circuits and therefore multiple “hot” and “neutral”
wire leads. These circuits may be rated for
either 20 amp or 30 amp current. The rating
of a particular circuit is indicated by the rating
of the AC receptacle(s) connected to it. Alteration of this assembly or use of underrated
connectors may be hazardous.
Individual grounds are provided for each circuit in a PD3, unless otherwise specified at the
time of order. The “hot” leads are distinguished by the color of the wire used. The design of the various circuits is specified at the
time of order. The designation of the circuits
begins with the outlets nearest the place where
the wire harness exits the chassis. This circuit
is considered “Circuit #1”. Outlets on this circuit are connected to the black wire lead.
Outlets for each succeeding circuit are attached to a different color lead in order as fo llows
Red
Yellow
Blue
Orange
Violet
Brown
For additional circuits, designations begin
again with black.
All “neutral” leads are white. All ground leads
are green. The exact configuration of the wiring is determined by the specifications comm unicated with the purchase order.
INSTALLATION
The PD3 chassis is assembled with two mo vable side mounting brackets. These brackets
may be positioned as required to match available rack mounting hardware. The distance
between mounting points should not exceed 48”. Always attach the PD3 to a stable surface using appropriate hardware such as a #10 machine screw and
nut.
The PD3 is not an “all weather” device. The surface
to which the PD3 is mounted should be stable and
protected from moisture and temperature extremes.
GROUND CONNECTION
Ground connection for the PD3 is to be made with
the green ground wire lead(s) installed in the unit. The
ground wires are connected to the AC receptacles
and to the PD3 chassis. Grounding is not to be made
solely by way of any metal conduit connected to the
chassis.
CAUTION
This PD3 is intended for commercial use only and is
to be installed only by a qualified electrical technician.
Installation or use in any manner inconsistent with this
documentation or with customary practice or local
wiring code may cause serious damage or injury. If a
malfunction is observed or suspected, disconnect this
device from AC power immediately and contact
Juice Goose or an electrical technician.
Each circuit in the PD3 is rated at either 20 or 30
amps. All wiring and components have appropriate
maximum current ratings. Do not exceed this capacity. Do not disconnect, rewire or replace any components.
There are no user servicable components inside the
PD3. Do not open the chassis.
SPECIFICATION
The internal and external wiring of the PD3 is either
10 or 12AWG THHN. The length of the external
wire harness is specified with the purchase order.
The electrical receptacles and all current conducting
components are UL recognized.
CONTACT
For technical or application support use the contact
Loading...