KIN-1000RM
Line Interactive UPS
Economical power protection with battery backup
to protect electronics and other small loads.
Fits in a single rack space. Can also mount in a
tower configuration.
Automatic voltage regulation ensures output
voltage is maintained near standard operating
levels.
FREE SOFTWARE
CD-ROM
• 1000VA / 600 Watts
• Single rack space
• Line interactive design
• Fully digitized microprocessor controlled
• Tel/modem internet surge suppressor
• Voltage regulation boost and buck
• EMI / RFI noise filter
• Surge protection receptacle for critical load
• Power, backup and battery fault status LED
• Lightning and surge protection
• 50 / 60 Hz auto sensing
• Advanced battery management
• Energy saving (UPS sleep mode)
• RS-232 communication
For additional information:
Juice Goose | 713-772-1404 | info@juicegoose.com
SPECIFICATIONS
KIN-1000RM
INPUT
OUTPUT
PROTECTION
BATTERY
Capacity 1000 VA
600 Watt
Voltage + / - 25% of line input
Frequency 50 or 60 Hz + / - 10% (auto sensing)
Voltage (on battery) Simulated sine wave 120V
Frequency (on battery) 50 or 60 Hz + / - 0.5%
Automatic
Voltage
Regulation
Transfer time to battery 24 milliseconds
Spike protection 320 Joules
EMI / RFI filter 10dB @ 0.15MHz, 50dB @ 30MHz
Current overload protection 60 seconds @ 110%, 3 seconds @130%
Type Sealed lead acid, maintenance free
Quantity (3) 6V, 8AH
Recharge time (typical) 8 hours to 90% of capacity
Increases output voltage 15% when input voltage drops 9% to 25% below standard. Decreases output voltage 10% when voltage rises
9% to 25% above standard
PHYSICAL
ENVIRONMENT
INDICATORS
Protection Automatic self test. Replace battery indicator
Backup time 3 - 180 minutes, depending on load
Dimensions (W x D x H) 15.0 x 14.3 x 1.7 (1U)
Weight 25.3 lbs
Line cord 6 ft, 5-15P
Receptacles (4) NEMA 5-15R battery,
(5) (1) NEMA 5-15R bypass
Operating temperature 32 - 104 degrees F
Audible noise < 40 dBA
Max altitude 11,500 ft above sea level
Load on battery power Slow beeping
Battery low Rapid beeping
Overload Continuous alarm sound