Page 1
Operating Instructions
Website: www.jtechdigital.com
Toll Free: 1-888-610-2818
Email: support@jtechdigital.com
USER MANUAL
J-Tech Digital®Audio Extender
Over Cat Cable
Model:JTECH-AET1000
JTD-ID:378
Operating Instructions
Notice
The information in this document is subject to change without notice. Every effort
has been made in the preparation of this document to ensure accuracy of the
contents, but all statements, information, and recommendations in this document
do not constitute the warranty of any kind, express or implied.
FEATURES
⚫ Transmission Range: Up to 990ft (300 meters)
⚫ Supports digital coaxial and optical toslink input and output
⚫ Supports Digital 5.1 (DTS, Dolby Digital, etc.)
⚫ Hight performance, zero latency and zero signal loss
⚫ Data Transmission Rate: 12.8 Mb/s
⚫ Sampling Rate: 32, 44.1, 48, 96Khz
Package Contents
⚫ Main Unit. Audio Extender over Cat5e/6 Cable
⚫ 1 x 5V/1A DC Adapter
⚫ 1 x User Manual
TABLE OF CONTENTS
Features
Package Contents
Specifications
Connecting and Operating
Panel Descriptions
Connection Diagram
Maintenance
Product Service
Warranty
2
Page 2
Operating Instructions
SPECIFICATIONS
Operating Temperature Range
-5 to +35℃(+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Data transfer speed
6.75Gbps
Connectors Transmitter
1xCat5e/6 out
1xPower DC
2xAudio in(for Optical and Coaxial)
Connectors Receiver
1xCat5e/6 in
2xAudio out(for Optical and Coaxial)
Audio format
Dolby 5.1, DTS Digital etc
Power consumption
1watts(Maximum)
Dimension (L×W×H)
60.5x46.5x20mm
Net Weight
150g(Pair)
Note1: Specifications are subject to change without notice. Mass and
dimensions are approximate.
CONNECTING AND OPERATING
1) Connect the HDMI input source (such as HD-DVD/PS3/STB etc) into transmitter
over HDMI cable.
2) Connect the output of transmitter and input of receiver over CAT5E or CAT6
cable.
3) Connect the HDMI output (such as HD-LCD/HD-DLP) into the receiver over HDMI
cable.
4) Connect power adapter in to the transmitter.
NOTE: Insert/Extract cables gently.
3
Operating Instructions
PANEL DESCRIPTIONS
Transmitter Panel
1) DC5V Power. 2) Cat5e/6 output port.
3) Coaxial input port. 4) Optical input port.
Receiver Panel
1) Cat5e/6 input port. 2) Coaxial output port.
3) Optical output port.
Connection Diagram
Application 1:
Application 2:
4
Page 3
Operating Instructions
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to
clean this unit.
PRODUCT SERVICE
1) Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in
these operating instructions.Refer all other servicing to authorized servicing
personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks
to confirm that the unit is in proper working condition.
WARRANTY
Free lifetime technical support from the manufacture and free 1 Year Manufacturer
Warranty from J-Tech Digital.
5
Operating Instructions
Loading...