JRC DGPS 212 Brochure

Internal Differential Beacon Receiver
12-Channel Parallel for simultaneous reception of 12 satellites.
Quick Position Fixing
NMEA0183 Output
PPS Signal Output (Precise Clock Signal)
DGPS 212
■COMPONENTS
135
φ126
φ40
1"-14 UNS-2B
Unit:mm
■SYSTEM CONFIGURATION
■OUTLINE DRAWING
JLR-4331E
6-pin connector (6-282-6SG-522)
option
FF30 FF50 JFV-250
RADAR 1000 RADAR 1500 RADAR 2000 RADAR 3000
NWU-800 PLOT 700FX
J-NAV 500 NWZ-4570
JRC Radar
JRC Fish Finder
JRC Plotter
JRC GPS Display
Name
DGPS Receiver
Instruction manual
No.
1
2
Type
JLR-4331E
Remarks
include 15m cable
Q'ty
1
1
Option :15m Extension Cable CFQ-8773
Seattle Branch : 1011 SW Klickitat Way, Bldg. B,
Suite 100, SEATTLE WA 98134, U.S.A. Telephone:+1(206)654-5644 Facsimile: +1(206)654-7030
Homepage:http://www.jrcamerica.com
JRC (UK)Limited :
1st Floor, Friars House, 157/168, Blackfriars Road, London SE1 8EZ, U.K. Telephone:+44(0)20-7261-1188 Facsimile: +44(0)20-7803-0996
DGPS 212
DGPS RECEIVER
(JLR-4331E)
Weight: less than 1.7kg
Specifications subject to change without notice.
For further information, contact:
Since 1915
PrintedinJapan2000.5 CAT.No.Y3-130(No.432-1-3)A
Main Office: Akasaka Twin Tower(Main), 17-22, Akasaka 2-chome, Minato-ku, Tokyo 107-8432, JAPAN Telephone: Tokyo(03)3584-8833 Facsimile: Tokyo(03)3584-8757
Overseas Branches : Seattle, London Liaison Offices : Kaohsiung, Manila, Bangkok, Singapore, Jakarta, New Delhi, New York, Rotterdam, Piraeus, Las Palmas
19EM
ISO
9001
ISO
14001 Certified
URL
Caution
Before attempting to operate this unit, read the instruction manual thoroughly to correctly and safty operate the unit.
■FEATURES
Internal Differential Beacon Receiver
The DGPS 212 includes a Beacon Receiver and a GPS Receiver. By using DGPS you can achieve true DGPS accuracy.
12-Channel Parallel for Receiving 12 Satellites Simultaneously
The DGPS 212 is designed to simultaneously receive signals from 12 orbiting satellites, ensuring the most accurate positioning.
Quick Position Fixing
Typically 45 seconds for first position fixing without GPS almanac data.
Conversion to NMEA0183 Output
Since the NMEA0183 output data is changeable between version
1.5 and version 2.1, you can connect the DGPS 212 to various Marine Electronics Equipment such as Marine Radars,Fishfinders, Plotters, or others.
PPS Signal Output
The DGPS 212 outputs a pulse per second which coincides with UTC second precisely. It can be used as a precise clock.
■SPECIFICATIONS
GPS Specifications
Receiver type :Multichannel (12-CH) all-in-view Frequency :1575.42MHz ± 1MHz (C/A code) Sensitivity :
-130dBm for acquisition, -133dBm for tracking
Accuracy :15mRMS(C/A code, HDOP4)
5m RMS when DGPS corrected
Time to first fix :Typically 45 seconds (cold start fix)
Typically 30 seconds (warm start fix)
Position update :Normally every 1 second
Beacon Specifications
Receiving frequency :283.5kHz to 325kHz Dynamic range :More than 90dB Demodulation :MSK (Minimum Shift Keying) Data bit rate :50,100,200bps
General
Data output :NMEA0183 ver.1.5 or 2.1 selectable
ver1.5 GGA, RMC, GLL, VTG,
PJRCDGP0,PJRCDGP1, PJRCDGP2
ver2.1 GGA, RMC, GLL, VTG, GSV, GSA,
PJRCDGP3, DTM, MSS
PPS signal output :positive pulse, 15μsec width Geodetic datum :46 (WGS-84, WGS-72, Japan, America,
Canada/Alaska, Europe, Australia, England, NAD-83, other 37 selectable)
Input voltage :10.816VDC (less than 5W) (Power Consumption)
Data cable :6-core cable,15m Operating temprature
:-25 to 55
Water proof :USCG CFR-46/IEC60945
Loading...