Jokab Safety Smile Tina Instruction Manual
Original instructions
Smile Tina
Emergency stop with indication
Jokab Safety AB Varlabergsvägen 11, S-434 39, Sweden
www.jokabsafety.com
Table of Contents
1 Introduction.............................................................................................................................. 3
Scope .................................................................................................................................................. 3
Audience ............................................................................................................................................. 3
Prerequisites ....................................................................................................................................... 3
Special notes....................................................................................................................................... 3
2 Overview...................................................................................................................................4
General description ............................................................................................................................. 4
Safety regulations ............................................................................................................................... 4
3 Connections............................................................................................................................. 5
Connection examples.......................................................................................................................... 5
4 Installation and maintenance ................................................................................................. 7
Installation precautions ....................................................................................................................... 7
Maintenance........................................................................................................................................ 7
Testing of the safety functions ............................................................................................................ 7
Troubleshooting .................................................................................................................................. 7
5 Operation.................................................................................................................................. 8
LED indication ..................................................................................................................................... 8
Information output signal attributes..................................................................................................... 8
6 Model overview........................................................................................................................ 9
7 Technical data........................................................................................................................ 10
Dimensions........................................................................................................................................ 11
8 EC Declaration of conformity ............................................................................................... 12
2
Smile_Tina_Manual_(English)_v1A
2010-10-19
www.jokabsafety.com
1 Introduction
Scope
The purpose of these instructions is to describe the emergency stop Smile Tina and to provide the
necessary information required for installation and operation.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
• Basic knowledge of Jokab Safety products.
• Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Warning!
Danger of severe personal injury!
An instruction or procedure which, if not carried out correctly, may result in
injury to the technician or other personnel.
Danger of damage to the equipment!
Caution!
NB: Notes are used to provide important or explanatory information.
An instruction or procedure which, if not carried out correctly, may damage the
equipment.
Smile_Tina_Manual_(English)_v1A
2010-10-19
3
www.jokabsafety.com
2 Overview
General description
In order to fulfil the need for a small and easy to install E-stop, Smile Tina has been developed. The
size of the device makes it possible to be installed wherever needed. With M12 connections or cable
and centralized mounting holes. Smile Tina is very easy to install, especially on aluminium extrusions.
There are three different versions available, either with one or two M12 connections or cable. Two
M12 connectors are used to enable the connection of E-stops in series, which is often used with
dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED
indicates the actual status according to the dynamic system. Smile Tina is intended for use in safety
circuits in accordance with EN 60204-1.
Safety regulations
Warning!
Carefully read through this entire
The devices shall be installed by a trained electrician following the Safety regulations, Standards and
the Machine directive.
Failure to comply with instructions, operation that is not in accordance with the use prescribed in these
instructions, improper installation or handling of the device can affect the safety of people and the
plant.
For installation and prescribed use of the product, the special notes in the instructions must be
carefully observed and the technical standards relevant to the application must be considered.
In case of failure to comply with the instructions or standards, especially when tampering with and/or
modifying the product, any liability is excluded.
manual before using the device.
4
Smile_Tina_Manual_(English)_v1A
2010-10-19
www.jokabsafety.com
Loading...