Johnson Controls VG1600 Series, VA9905-KGA-2, VA9905 Series, VA9905-KGA-1 Installation Instructions Manual
VA9905 Actuator and
VG1600 Series Six-Way Valves
Installation Instructions
14-88360-03206, Rev. -
Contents
Compliance Information............................................................................1
About This Document ............................................................................... 1
Accessories ..............................................................................................1
Support Information ..................................................................................1
Parts Included...........................................................................................2
Tools Required..........................................................................................2
Flow Disk Set............................................................................................3
Installing the Six-Way Valve to a System .................................................4
Clearance Required to Install an Actuator ................................................4
Attaching the Actuator to the Six-way Valve ............................................. 5
Setting the DIP Switches ..........................................................................6
Wiring the Actuator ................................................................................... 6
Manual Override and Flow Direction ........................................................7
VA9905 Technical Specications .............................................................. 8
VG1600 Valve Series Technical Specications ........................................9
Compliance Information
IMPORTANT: Use this VA9905 Actuator only to control equipment under normal operating conditions.
Where failure or malfunction of the VA9905 Actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate
and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or
protect against failure or malfunction of the device.
IMPORTANT : Utiliser ce [nom complet de l’appareil] uniquement en tant que dispositif de contrôle de
fonctionnement. Lorsqu’une défaillance ou un dysfonctionnement du [nom abrégé de l’appareil] risque de
provoquer des blessures ou d’endommager l’équipement contrôlé ou un autre équipement, la conception du
système de contrôle doit intégrer des dispositifs de protection supplémentaires. Veiller dans ce cas à intégrer de
façon permanente d’autres dispositifs, tels que des systèmes de supervision ou d’alarme, ou des dispositifs de
sécurité ou de limitation, ayant une fonction d’avertissement ou de protection en cas de défaillance ou de
dysfonctionnement du [nom abrégé de l’appareil].
About This Document
This guide describes how to install and congure the VA9905 Actuator and Six-Way Valve. The procedures in this
guide must be completed sequentially, as they are listed.
Accessories (order separately)
Code Number Name Description
VG1600-01 Wall Mounting Bracket Kit Provides a mounting bracket for the VA9905 Actuator.
VG1600-02 Flow Disk Kit Provides replacement ow disks.
VG1600-03 Insulation Shell Kit Provides valve insulation.
VG1600-04 Sweat Union Fitting Kit Provides sweat union ttings.
M9300-100 Conduit Adapter Kit (5 per kit) Provides a conduit adapter that protects the input cable.
Support Information
European Single Point of Contact: NA/SA Single Point of Contact: APAC Single Point of Contact:
Johnson Controls Johnson Controls Johnson Controls
Westendhof 3 507 E Michigan Street C/O Controls Product Management
45143 Essen Milwaukee WI 53202 No. 22 Block D, New District
Germany USA Wuxi Jiangsu Province 214142
China
1
14-88360-03206, Rev. A
Parts Included
VA9905 Actuator
Two Flow Disk Sets
Two Ring Nuts
VG1600 Series Valve
Tools Required
• 8mm (5/16 in) slotted screwdriver
or a TORX® T-20 driver
2
14-88360-03206, Rev. A
Loading...