VG1000 Series Two-Way
Non-Spring-Return Plated Brass
Ball and Stem Ball Valve Assemblies
VG1000 Series
with Non-Spring-Return Electric Actuator
Description
VG1000 Series Ball Valves are designed to
regulate the flow of hot or chilled water and, for
some models, low-pressure steam in
response to the demand of a controller in
HVAC systems. Available in sizes 1/2 through
2 in. (DN15 through DN50), this family of
two- and three-way forged brass valves is
factory or field mounted to Johnson Controls®
VA9104, M9106, M9109, and M9100 Series
Non-Spring-Return and VA9203 and
VA9208 Series Spring-Return Electric
Actuators for on/off, floating, or proportional
control.
Refer to the VG1000 Series Forged Brass
Ball Valves Product Bulletin (LIT-977132) for
important product application information.
Features
• Forged Brass Body — provides 580 psig
static pressure rating.
• 200 psi Closeoff Pressure Rating —
provides tight shutoff.
Selection Charts
Two-Way Plated Brass Trim Valves, Non-Spring Return, VA9104 Electric Actuators without Switches
Fluid Temperatures: 23 to 203°F (-5 to 95°C)
Not Rated for Steam Service
Valve Size, in. Cv Closeoff
Actuators with M3 Screw Terminals VA9104-AGA-3S VA9104-IGA-3S VA9104-GGA-3S
Actuators
Actuators
VG1241AD 1/2 1.2
VG1241AE 1.9
Threaded Ball Valves and
Threaded Ball Valves and
VG1241AF 2.9
VG1241AG 4.7
VG1241AL 7.4
VG1241AN 11.7 VG1241AN+9T4AGA VG1241AN+9T4IGA VG1241AN+9T4GGA
VG1241BG 3/4 4.7
VG1241BL 7.4
VG1241BN 11.7 VG1241BN+9T4AGA VG1241BN+9T4IGA VG1241BN+9T4GGA
VG1241CL 17.4
VG1241CN 11.7
VG1241CP 18.7 VG1241CP+9T4AGA VG1241CP+9T4IGA VG1241CP+9T4GGA
Actuators with 48 in. (1.2 m) 18 AWG Plen um Cable VA9104-AGA-2S VA9104-IGA-2S VA9104-GGA-2S
VG1241AD 1/2 1.2
VG1241AE 1.9
VG1241AF 2.9
VG1241AG 4.7
VG1241AL 7.4
VG1241AN 11.7 VG1241AN+9A4AGA VG1241AN+9A4IGA VG1241AN+9A4GGA
VG1241BG 3/4 4.7
VG1241BL 7.4
VG1241BN 11.7 VG1241BN+9A4AGA VG1241BN+9A4IGA VG1241BN+9A4GGA
VG1241CL 17.4
VG1241CN 11.7
VG1241CP 18.7 VG1241CP+9A4AGA VG1241CP+9A4IGA VG1241CP+9A4GGA
1. To avoid excessive wear or drive time on the motor for the AGA models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
2. Valve has a characterizing disk.
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
Threaded Ball Valves and Actuators
Code No. LIT-1900226
T wo-Way , Plated Brass T rim, NPT End Connections Ball V alves
s
• Graphite-Reinforced
Polytetrafluoroethylene (PTFE) Seats —
include 15% graphite-reinforced ball seals,
providing better wear resistance.
• Chrome-Plated Brass Ball and Stem
Assembly Standard — handles both chilled
and hot water applications with a fluid
temperature range of 23 to 203°F
(-5to95°C).
• 500:1 Rangeability — provides accurate
control under all load conditions.
Repair Information
If the VG1000 Series Ball Valve fails to
operate within its specifications, replace the
valve body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls representative.
24 VAC
On/Off (Floating)
psig
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
200 VG1241AD+9T4AGA VG1241AD+9T4IGA VG1241AD+9T4GGA
200 VG1241BG+9T4AGA VG1241BG+9T4IGA VG1241BG+9T4GGA
200 VG1241CL+9T4AGA VG1241CL+9T4IGA VG1241CL+9T4GGA
200 VG1241AD+9A4AGA VG1241AD+9A4IGA VG1241AD+9A4GGA
200 VG1241BG+9A4AGA VG1241BG+9A4IGA VG1241BG+9A4GGA
200 VG1241CL+9A4AGA VG1241CL+9A4IGA VG1241CL+9A4GGA
without Timeout
VG1241AE+9T4AGA VG1241AE+9T4IGA VG1241AE+9T4GGA
VG1241AF+9T4AGA VG1241AF+9T4IGA VG1241AF+9T4GGA
VG1241AG+9T4AGA VG1241AG+9T4IGA VG1241AG+9T4GGA
VG1241AL+9T4AGA VG1241AL+9T4IGA VG1241AL+9T4GGA
VG1241BL+9T4AGA VG1241BL+9T4IGA VG1241BL+9T4GGA
VG1241CN+9T4AGA VG1241CN+9T4IGA VG1241CN+9T4GGA
VG1241AE+9A4AGA VG1241AE+9A4IGA VG1241AE+9A4GGA
VG1241AF+9A4AGA VG1241AF+9A4IGA VG1241AF+9A4GGA
VG1241AG+9A4AGA VG1241AG+9A4IGA VG1241AG+9A4GGA
VG1241AL+9A4AGA VG1241AL+9A4IGA VG1241AL+9A4GGA
VG1241BL+9A4AGA VG1241BL+9A4IGA VG1241BL+9A4GGA
VG1241CN+9A4AGA VG1241CN+9A4IGA VG1241CN+9A4GGA
1
V–90
On/Off (Floating)
with Timeout
DC 0 to 10 V Proportional
Threaded Ball Valves and Actuators
VG1000 Series Two-Way, Plated Brass Trim, NPT End Connections Ball Valves with
Non-Spring-Return Electric Actuators (Continued)
Two-Way Plated Brass Trim Ball Valves, Non-Spring Return, M9106/M9109 Electric Actuators without Switches
Fluid Temperatures: 23 to 203°F (-5 to 95°C)
Not Rated for Steam Service
Valve Size, in. Cv Closeoff
psig
VG1241DN 1-1/4 11.7
VG1241DP 18.7
VG1241DR 29.2 VG1241DR+906AGA VG1241DR+906IGA VG1241DR+906GGA
VG1241EP 1-1/2 18.7
VG1241ER 29.2
VG1241ES 46.8 VG1241ES+906AGA VG1241ES+906IGA VG1241ES+906GGA
VG1241FR 2 29.2
VG1241FS 46.8
VG1241FT 73.7 VG1241FT+909AGA VG1241FT+909GGA
1. To avoid excessive wear or drive time on the motor for the AGA models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
2. Valve has a characterizing disk.
2
2
2
2
2
2
200 VG1241DN+906AGA VG1241DN+906IGA VG1241DN+906GGA
200 VG1241EP+906AGA VG1241EP+906IGA VG1241EP+906GGA
200 VG1241FR+909AGA VG1241FR+909GGA
Two-Way Plated Brass Trim Ball Valves, Non-Spring Return, M9106/M9109 Electric Actuators with Switches
Fluid Temperatures: 23 to 203°F (-5 to 95°C)
Not Rated for Steam Service
Valve Size, in. Cv Closeoff
psig
VG1241AD 1/2 1.2
VG1241AE 1.9
VG1241AF 2.9
VG1241AG 4.7
VG1241AL 7.4
VG1241AN 11.7 VG1241AN+906AGC VG1241AN+906IGC VG1241AN+906GGC
VG1241BG 3/4 4.7
VG1241BL 7.4
VG1241BN 11.7 VG1241BN+906AGC VG1241BN+906IGC VG1241BN+906GGC
VG1241CL 17.4
VG1241CN 11.7
VG1241CP 18.7 VG1241CP+906AGC VG1241CP+906IGC VG1241CP+906GGC
VG1241DN 1-1/4 11.7
VG1241DP 18.7
VG1241DR 29.2 VG1241DR+906AGC VG1241DR+906IGC VG1241DR+906GGC
VG1241EP 1-1/2 18.7
VG1241ER 29.2
VG1241ES 46.8 VG1241ES+906AGC VG1241ES+906IGC VG1241ES+906GGC
VG1241FR 2 29.2
VG1241FS 46.8
VG1241FT 73.7 VG1241FT+909AGC VG1241FT+909GGC
1. To avoid excessive wear or drive time on the motor for the AGC models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
2. Valve has a characterizing disk.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
200 VG1241AD+906AGC VG1241AD+906IGC VG1241AD+906GGC
200 VG1241BG+906AGC VG1241BG+906IGC VG1241BG+906GGC
200 VG1241CL+906AGC VG1241CL+906IGC VG1241CL+906GGC
200 VG1241DN+906AGC VG1241DN+906IGC VG1241DN+906GGC
200 VG1241EP+906AGC VG1241EP+906IGC VG1241EP+906GGC
200 VG1241FR+909AGC VG1241FR+909GGC
AC 24 V
On/Off (Floating)
without Timeout
1
M9106-AGA-2
M9109-AGA-2
VG1241DP+906AGA VG1241DP+906IGA VG1241DP+906GGA
VG1241ER+906AGA VG1241ER+906IGA VG1241ER+906GGA
VG1241FS+909AGA VG1241FS+909GGA
On/Off (Floating)
DC 0 to 10 V Proportional
with Timeout
M9106-IGA-2 M9106-GGA-2
M9109-GGA-2
AC 24 V
On/Off (Floating)
without Timeout
1
M9106-AGC-2
M9109-AGC-2
VG1241AE+906AGC VG1241AE+906IGC VG1241AE+906GGC
VG1241AF+906AGC VG1241AF+906IGC VG1241AF+906GGC
VG1241AG+906AGC VG1241AG+906IGC VG1241AG+906GGC
VG1241AL+906AGC VG1241AL+906IGC VG1241AL+906GGC
VG1241BL+906AGC VG1241BL+906IGC VG1241BL+906GGC
VG1241CN+906AGC VG1241CN+906IGC VG1241CN+906GGC
VG1241DP+906AGC VG1241DP+906IGC VG1241DP+906GGC
VG1241ER+906AGC VG1241ER+906IGC VG1241ER+906GGC
VG1241FS+909AGC VG1241FS+909GGC
On/Off (Floating)
DC 0 to 10 V Proportional
with Timeout
M9106-IGC-2 M9106-GGC-2
M9109-GGC-2
Actuators
Actuators
Actuators
Actuators
Threaded Ball Valves and
Threaded Ball Valves and
Threaded Ball Valves and
Threaded Ball Valves and
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–91
Threaded Ball Valves and Actuators
VG1000 Series Two-Way, Plated Brass Trim, NPT End Connections Ball Valves with
Non-Spring-Return Electric Actuators (Continued)
Technical Specifications
VG1000 Series Two-Way, Plated Brass Trim, NPT End Connections Ball Valves with Non-Spring-Return Electric Actuators
1
Service
Valve Fluid Temperature
Limits
Maximum Actuator Fluid
Temperature Limi t
Valve Body Pressure Rating Water 580 psig (4,000 kPa) (PN40)
Maximum Closeoff Pressure 200 psid (1,378 kPa)
Maximum Recommended Operating Pressure Drop 50 psid (340 kPa)
Flow Characteristics Two-Way Equal Percentage
Rangeability
Minimum Ambient Operating Temperature -4°F (-20°C)
Maximum Ambient Operating
Temperature
Actuator and Linkage)
Leakage 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
End Connections National Pipe Thread (NPT)
Materials Body Forged Brass
1. Proper water treatment is recommended; refer to the VDI 2035 Guideline.
2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.
Actuators
Actuators
3. In steam applications, install the valve with the st em horizontal to the piping, and wrap the valve and piping with insulation.
2
3
(Limited by the
Water 23 to 203F (-5 to 95C)
Steam Not Rated for Steam Service
203°F (95°C) VA9104 Series Non-Spring-Return Actuators
Steam Not Rated for Steam Service
140°F (60°C) VA9104 Series Non-Spring-Return Actuators
125°F (52°C) M9106 and M9109 Series Non-Spring-Return Actuators with M9000-520 Linkage
Ball Chrome Plated Brass
Blowout-Proof Stem Nickel Plated Brass
Seats Graphite-Reinforced PTFE with Ethylene Propylene Diene Monomer (EPDM) O-Ring Backing
Stem Seals EPDM Double O-Rings
Characterizing Disk Amodel
Hot Water, Chilled Water, or 50/50 Glycol Solutions for HVAC Systems
M9104 Series Non-Spring-Return Actuat ors with M9000-550 Linkage
M9106 or M9109 Series Non-Spring-Return Act uators with M9000-520 Linkage
Greater than 500:1
M9104 Series Non-Spring-Return Actuat ors with M9000-550 Linkage
® AS-1145HS Polyphthalamide Resin
Threaded Ball Valves and
Threaded Ball Valves and
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–92
Loading...