Johnson Controls VG1000 Series Data Sheet

VG1000 Series Three-Way,

Non-Spring-Return, Stainless Steel

Ball and Stem Ball Valve Assemblies

Threaded Ball Valves and Actuators

VG1000 Series

Three-Way, Stainless Steel Trim, NPT End Connections Ball

Valves with Non-Spring-Return Electric Actuator

Description

VG1000 Series Ball Valves are designed to
regulate the flow of hot or chilled water and, for
some models, low-pressure steam in
response to the demand of a controller in
HVAC systems. Available in sizes 1/2 through
2 in. (DN15 through DN50), this family of two­and three-way forged brass valves is factory or
field mounted to Johnson Controls® VA9104,
M9106, M9109, and M9100 Series
Non-Spring-Return and VA9203 and
VA9208 Series Spring-Return Electric
Actuators for on/off, floating, or proportional
control.

Refer to the VG1000 Series Forged Brass
Ball Valves Product Bulletin (LIT-977132) for
important product application information.

Features

• Forged Brass Body — provides 580 psig
static pressure rating.

• 200 psi Closeoff Pressure Rating —
provides tight shutoff.

• Graphite-Reinforced
Polytetrafluoroethylene (PTFE) Seats —
include 15% graphite-reinforced ball seals,
providing better wear resistance.

• 300 Series Stainless Steel Ball and Stem
Assembly — tolerates high-temperature
water or 15 psi saturated steam with fluid
temperatures of -22 to 284F (-30 to
140C) or where a higher degree of
corrosion protection is desired.

• 500:1 Rangeability — provides accurate
control under all load conditions.

Repair Information

If the VG1000 Series Ball Valve fails to
operate within its specifications, replace the
valve body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls representative.

Code No. LIT-1900223

s

Selection Charts

Three-Way Stainless Steel Trim Ball Valves, Non-Spring Return, VA9104 Electric Actuators without Switches

Fluid Temperatures: -4 to 212°F (-22 to 100°C)
Not Rated for Steam Service

Valve Size, in. Cv (Port A/B) Closeoff

Actuators

Actuators

Actuators with M3 Screw Ter mi nals VA9104-AGA-3S VA9104-IGA-3S VA9104-GGA-3S
VG1845AD 1/2 1.2
VG1845AE 1.9

Threaded Ball Valves and

Threaded Ball Valves and

VG1845AF 2.9
VG1845AG 4.7
VG1845AL 7.4
VG1845AN 11.7
VG1845BG 3/4 4.7
VG1845BL 7.4
VG1845BN 11.7
VG1845CL 17.4
VG1845CN 11.7
VG1845CP 18.7
Actuators with 48 in. (1.2 m) 18 AWG Plenum Cable VA9104-AGA-2S VA9104-IGA-2S VA9104-GGA-2S
VG1845AD 1/2 1.2
VG1845AE 1.9
VG1845AF 2.9
VG1845AG 4.7
VG1845AL 7.4
VG1845AN 11.7
VG1845BG 3/4 4.7
VG1845BL 7.4
VG1845BN 11.7
VG1845CL 17.4
VG1845CN 11.7
VG1845CP 18.7

1. To avoid excessive wear or drive time on the motor for the AGA models, use a controller or software that provides a timeout function to remove the signal at the

2. Valve has a characterizing disk.

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

end of rotation (stall).

24 VAC

psig

2

/ 0.7

2

/ 1.2

2

/ 1.9

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845AN+9T4AGA VG1845AN+9T4IGA VG1845AN+9T4GGA

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845BN+9T4AGA VG1845BN+9T4IGA VG1845BN+9T4GGA

2

/ 4.7

2

/ 7.4
/ 9.4 VG1845CP+9T4AGA VG1845CP+9T4IGA VG1845CP+9T4GGA

2

/ 0.7

2

/ 1.2

2

/ 1.9

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845AN+9A4AGA VG1845AN+9A4IGA VG1845AN+9A4GGA

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845BN+9A4AGA VG1845BN+9A4IGA VG1845BN+9A4GGA

2

/ 4.7

2

/ 7.4
/ 9.4 VG1845CP+9A4AGA VG1845CP+9A4IGA VG1845CP+9A4GGA

200 VG1845AD+9T4AGA VG1845AD+9T4IGA VG1845AD+9T4GGA

200 VG1845BG+9T4AGA VG1845BG+9T4IGA VG1845BG+9T4GGA

200 VG1845CL+9T4AGA VG1845CL+9T4IGA VG1845CL+9T4GGA

200 VG1845AD+9A4AGA VG1845AD+9A4IGA VG1845AD+9A4GGA

200 VG1845BG+9A4AGA VG1845BG+9A4IGA VG1845BG+9A4GGA

200 VG1845CL+9A4AGA VG1845CL+9A4IGA VG1845CL+9A4GGA

without Timeout

VG1845AE+9T4AGA VG1845AE+9T4IGA VG1845AE+9T4GGA
VG1845AF+9T4AGA VG1845AF+9T4IGA VG1845AF+9T4GGA
VG1845AG+9T4AGA VG1845AG+9T4IGA VG1845AG+9T4GGA
VG1845AL+9T4AGA VG1845AL+9T4IGA VG1845AL+9T4GGA

VG1845BL+9T4AGA VG1845BL+9T4IGA VG1845BL+9T4GGA

VG1845CN+9T4AGA VG1845CN+9T4IGA VG1845CN+9T4GGA

VG1845AE+9A4AGA VG1845AE+9A4IGA VG1845AE+9A4GGA
VG1845AF+9A4AGA VG1845AF+9A4IGA VG1845AF+9A4GGA
VG1845AG+9A4AGA VG1845AG+9A4IGA VG1845AG+9A4GGA
VG1845AL+9A4AGA VG1845AL+9A4IGA VG1845AL+9A4GGA

VG1845BL+9A4AGA VG1845BL+9A4IGA VG1845BL+9A4GGA

VG1845CN+9A4AGA VG1845CN+9A4IGA VG1845CN+9A4GGA

On/Off (Floating)

1

On/Off (Floating)
with Timeout

0 to 10 VDC Proportional

V–112

Threaded Ball Valves and Actuators

VG1000 Series Three-Way, Stainless Steel Trim, NPT End Connections Ball Valves with
Non-Spring-Return Electric Actuators (Continued)

Three-Way Stainless Steel Trim Ball Valves, Non-Spring Return, VA9104 Electric Actuators without Switches with
M9000-561 Thermal Barrier Installed

Fluid Temperatures: -22 to 284°F (-30 to 140°C)
Water and 15 psi Saturated Steam

Valve Size, in. Cv (Port A/B) Closeoff

psig

Actuators with M3 Screw Terminals with M9000-561 Thermal
Barrier Installed

VG1845AD 1/2 1.2
VG1845AE 1.9
VG1845AF 2.9
VG1845AG 4.7
VG1845AL 7.4
VG1845AN 11.7
VG1845BG 3/4 4.7
VG1845BL 7.4
VG1845BN 11.7
VG1845CL 17.4
VG1845CN 11.7
VG1845CP 18.7
Actuators with 48 in. (1.2 m) 18 AWG Plenum Cable with

M9000-561 Thermal Barrier Installed
VG1845AD 1/2 1.2
VG1845AE 1.9
VG1845AF 2.9
VG1845AG 4.7
VG1845AL 7.4
VG1845AN 11.7
VG1845BG 3/4 4.7
VG1845BL 7.4
VG1845BN 11.7
VG1845CL 17.4
VG1845CN 11.7
VG1845CP 18.7

1. To avoid excessive wear or drive time on the motor for the AGA models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).

2. Valve has a characterizing disk.

2

/ 0.7

2

/ 1.2

2

/ 1.9

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845ANH9T4AGA VG1845ANH9T4IGA VG1845ANH9T4GGA

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845BNH9T4AGA VG1845BNH9T4IGA VG1845BNH9T4GGA

2

/ 4.7

2

/ 7.4
/ 9.4 VG1845CPH9T4AGA VG1845CPH9T4IGA VG1845CPH9T4GGA

2

/ 0.7

2

/ 1.2

2

/ 1.9

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845ANH9A4AGA VG1845ANH9A4IGA VG1845ANH9A4GGA

2

/ 2.9

2

/ 4.7

/ 5.8 VG1845BNH9A4AGA VG1845BNH9A4IGA VG1845BNH9A4GGA

2

/ 4.7

2

/ 7.4
/ 9.4 VG1845CPH9A4AGA VG1845CPH9A4IGA VG1845CPH9A4GGA

200 VG1845ADH9T4AGA VG1845ADH9T4IGA VG1845ADH9T4GGA

200 VG1845BGH9T4AGA VG1845BGH9T4IGA VG1845BGH9T4GGA

200 VG1845CLH9T4AGA VG1845CLH9T4IGA VG1845CLH9T4GGA

200 VG1845ADH9A4AGA VG1845ADH9A4IGA VG1845ADH9A4GGA

200 VG1845BGH9A4AGA VG1845BGH9A4IGA VG1845BGH9A4GGA

200 VG1845CLH9A4AGA VG1845CLH9A4IGA VG1845CLH9A4GGA

24 VAC

On/Off (Floating)
without Timeout

1

VA9104-AGA-3S VA9104-IGA-3S VA9104-GGA-3S

VG1845AEH9T4AGA VG1845AEH9T4IGA VG1845AEH9T4GGA
VG1845AFH9T4AGA VG1845AFH9T4IGA VG1845AFH9T4GGA
VG1845AGH9T4AGA VG1845AGH9T4IGA VG1845AGH9T4GGA
VG1845ALH9T4AGA VG1845ALH9T4IGA VG1845ALH9T4GGA

VG1845BLH9T4AGA VG1845BLH9T4IGA VG1845BLH9T4GGA

VG1845CNH9T4AGA VG1845CNH9T4IGA VG1845CNH9T4GGA

VA9104-AGA-2S VA9104-IGA-2S VA9104-GGA-2S

VG1845AEH9A4AGA VG1845AEH9A4IGA VG1845AEH9A4GGA
VG1845AFH9A4AGA VG1845AFH9A4IGA VG1845AFH9A4GGA
VG1845AGH9A4AGA VG1845AGH9A4IGA VG1845AGH9A4GGA
VG1845ALH9A4AGA VG1845ALH9A4IGA VG1845ALH9A4GGA

VG1845BLH9A4AGA VG1845BLH9A4IGA VG1845BLH9A4GGA

VG1845CNH9A4AGA VG1845CNH9A4IGA VG1845CNH9A4GGA

On/Off (Floating)
with Timeout

0 to 10 VDC Proportional

Actuators

Actuators

Actuators

Actuators

Threaded Ball Valves and

Threaded Ball Valves and

Threaded Ball Valves and

Threaded Ball Valves and

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

V–113

VG1000 Series Three-Way, Stainless Steel Trim, NPT End Connections Ball Valves with
Non-Spring-Return Electric Actuators (Continued)

Three-Way Stainless Steel Trim Ball Valves, Non-Spring Return, M9106/M9109 Electric Actuators without Switches

Fluid Temperatures: -22 to 284°F (-30 to 140°C)
Water and 15 psi Saturated Steam

Valve Size, in. Cv

VG1845DN 1-1/4 11.7 / 7.4
VG1845DP 18.7
VG1845DR 29.2
VG1845EP 1-1/2 18.7
VG1845ER 29.2
VG1845ES 46.8
VG1845FR 2 29.2
VG1845FS 46.8
VG1845FT 73.7

1. To avoid excessive wear or drive time on the motor for the AGA models, use a controller or software that provides a timeout function to remove the signal at the

2. Valve has a characterizing disk.

Three-Way Stainless Steel Trim Ball Valves, Non-Spring Return, M9106/M9109 Electric Actuators with Switches

Fluid Temperatures: -22 to 284°F (-30 to 140°C)
Water and 15 psi Saturated Steam

Valve Size, in. Cv

VG1845AD 1/2 1.2 / 0.7
VG1845AE 1.9

Actuators

Actuators

VG1845AF 2.9
VG1845AG 4.7

Threaded Ball Valves and

Threaded Ball Valves and

VG1845AL 7.4
VG1845AN 11.7
VG1845BG 3/4 4.7
VG1845BL 7.4
VG1845BN 11.7
VG1845CL 17.4
VG1845CN 11.7
VG1845CP 18.7
VG1845DN 1-1/4 11.7
VG1845DP 18.7
VG1845DR 29.2
VG1845EP 1-1/2 18.7
VG1845ER 29.2
VG1845ES 46.8
VG1845FR 2 29.2
VG1845FS 46.8
VG1845FT 73.7

1. To avoid excessive wear or drive time on the motor for the AGC models, use a controller or soft ware that provides a timeout function to remove the signal at the

2. Valve has a characterizing disk.

end of rotation (stall).

end of rotation (stall).

Threaded Ball Valves and Actuators

AC 24 V

(Port A/B)

/ 11.7
/ 14.6 VG1845DR+906AGA VG1845DR+906IGA VG1845DR+906GGA
/ 11.7
/ 18.7
/ 23.4 VG1845ES+906AGA VG1845ES+906IGA VG1845ES+906GGA
/ 18.7
/ 29.2
/ 36.8 VG1845FT+909AGA VG1845FT+909GGA

psig

2

200 VG1845DN+906AGA VG1845DN+906IGA VG1845DN+906GGA

2

2

200 VG1845EP+906AGA VG1845EP+906IGA VG1845EP+906GGA

2

2

200 VG1845FR+909AGA VG1845FR+909GGA

2

Closeoff

Closeoff

(Port A/B)

/ 1.2
/ 1.9
/ 2.9
/ 4.7

/ 5.8 VG1845AN+906AGC VG1845AN+906IGC VG1845AN+906GGC
/ 2.9
/ 4.7

/ 5.8 VG1845BN+906AGC VG1845BN+906IGC VG1845BN+906GGC
/ 4.7

/ 7.4

/ 9.4 VG1845CP+906AGC VG1845CP+906IGC VG1845CP+906GGC

/ 7.4

/ 11.7

/ 14.6 VG1845DR+906AGC VG1845DR+906IGC VG1845DR+906GGC

/ 11.7

/ 18.7

/ 23.4 VG1845ES+906AGC VG1845ES+906IGC VG1845ES+906GGC

/ 18.7

/ 29.2

/ 36.8 VG1845FT+909AGC VG1845FT+909GGC

psig

2

200 VG1845AD+906AGC VG1845AD+906IGC VG1845AD+906GGC

2
2
2
2

2

200 VG1845BG+906AGC VG1845BG+906IGC VG1845BG+906GGC

2

2

200 VG1845CL+906AGC VG1845CL+906IGC VG1845CL+906GGC

2

2

200 VG1845DN+906AGC VG1845DN+906IGC VG1845DN+906GGC

2

2

200 VG1845EP+906AGC VG1845EP+906IGC VG1845EP+906GGC

2

2

200 VG1845FR+909AGC VG1845FR+909GGC

2

On/Off (Floating)
without Timeout

M9106-AGA-2
M9109-AGA-2

1

On/Off (Floating)

0 to 10 VDC Proportional

with Timeout
M9106-IGA-2 M9106-GGA-2

M9109-GGA-2

VG1845DP+906AGA VG1845DP+906IGA VG1845DP+906GGA

VG1845ER+906AGA VG1845ER+906IGA VG1845ER+906GGA

VG1845FS+909AGA VG1845FS+909GGA

AC 24 V

On/Off (Floating)
without Timeout

1

M9106-AGC-2
M9109-AGC-2

VG1845AE+906AGC VG1845AE+906IGC VG1845AE+906GGC
VG1845AF+906AGC VG1845AF+906IGC VG1845AF+906GGC
VG1845AG+906AGC VG1845AG+906IGC VG1845AG+906GGC
VG1845AL+906AGC VG1845AL+906IGC VG1845AL+906GGC

VG1845BL+906AGC VG1845BL+906IGC VG1845BL+906GGC

VG1845CN+906AGC VG1845CN+906IGC VG1845CN+906GGC

VG1845DP+906AGC VG1845DP+906IGC VG1845DP+906GGC

VG1845ER+906AGC VG1845ER+906IGC VG1845ER+906GGC

VG1845FS+909AGC VG1845FS+909GGC

On/Off (Floating)

0 to 10 VDC Proportional

with Timeout
M9106-IGC-2 M9106-GGC-2

M9109-GGC-2

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

V–114

Threaded Ball Valves and Actuators

VG1000 Series Three-Way, Stainless Steel Trim, NPT End Connections Ball Valves with
Non-Spring-Return Electric Actuators (Continued)

Technical Specifications

VG1000 Series Three-Way, Stainless Steel Trim, NPT End Connections Ball Valves with Non-Spring-Return Electric Actuators

1

Service

Fluid Temperature Limits Water -22 to 284F (-30 to 140C)

Steam 15 psig (103 kPa) at 250°F (121°C)

Maximum Actuator Fluid
Temperature Limi ts

Valve Body Pressure/Temperature
Rating

Maximum Closeoff Pressure 200 psid (1,378 kPa)
Maximum Recommended Operating Pressure Drop 50 psid (340 kPa)
Flow Characteristics Three-Way Equal Percentage Flow Characteristics of In-Line Port A (Coil) and Linear Flow Characteristics of

Rangeability
Minimum Ambient Operating Temperature -4°F (-20°C)
Maximum Ambient

Operating Temperature
the Actuator and Linkage)

Leakage 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
End Connections National Pipe Thread (NPT)
Materials Body Forged Brass

1. Proper water treatment is recommended; refer to the VDI 2035 Guideline.

2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.

3. In steam applications, install the valve with the st em horizontal to the piping and wrap the valve and piping with insulation.

2

3

(Limited by

212°F (100°C) VA9104 Series

284°F (140°C) VA9104 Series Non-Spring-Ret urn Actuators

Water 580 psig (4,000 kPa) (PN40)
Steam 15 psig (103 kPa) Saturated Steam

140°F (60°C) VA9104 Seri es Non-Spring-Return Actuators

125°F (52°C) M9106 or M9109 Series Non-Spring-Return Actuators with M9000-520 Linkage

Ball 300 Series Stainless Steel
Blowout-Proof Stem 300 Series Stainless Steel

Seats Graphite-Reinforced Polytetrafluoroethylene (PTFE) with Ethylene Propylen e Di ene Monomer

Stem Seals EPDM Double O-Rings
Characterizing Disk Amodel

Hot Water, Chilled Water, 50/50 Glycol Solutions, and 15psig (103 kPa) Saturated Steam for
HVAC Systems

M9104 with M9000-550 Linkage

M9106 or M9109 Series Non-Spring-Return Actuators with M9000-520 Linkage

Angle Port B (Bypass)
Greater than 500:1

M9104 Series Non-Spring-Return Actuato r s with M9000-550 Linkage

(EPDM) O-Ring Backing

® AS-1145HS Polyphthalamide Resin

Actuators

Actuators

Actuators

Actuators

Threaded Ball Valves and

Threaded Ball Valves and

Threaded Ball Valves and

Threaded Ball Valves and

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

V–115