Johnson Controls T60xDFH-4 Series, T60xDFH-4+PIR Series Catalog Page
Code No. LIT-1900615
T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with
Dehumidification and Occupancy Sensing Capability
Issued November 13, 2009
T60xDFH-4 and T60xDFH-4+PIR Series
Thermostat Controllers with Dehumidification and Occupancy
Sensing Capability
Description
The T60xDFH-4 and T60xDFH-4+PIR Series
Thermostat Controllers provide control of twoor four-pipe fan coils, cabinet unit heaters, or
other equipment. These thermostat controllers
provide on/off, floating, or proportional
0 to 10 VDC control outputs; three speeds of
fan control; and dehumidification capability.
The T60xDFH-4+PIR Series Thermostat
Controllers have occupancy sensing capability
built into the device. These are stand-alone
devices that maximize up to 30% energy
savings in high-energy usage light commercial
buildings, such as schools and hotels, during
occupied times by using additional Stand-By
setpoints.
The non-programmable T60x Series
Thermostat Controllers provide the user
access to parameters such as system mode,
fan mode, and temperature setpoints.
Additionally, the T60x Series has over
20 configurable parameters enabling the
thermostat controllers to adapt to a variety of
applications.
All T60x Series Thermostat Controllers use an
intuitive, plain text, menu-driven backlit display
that makes setup and operation quick and
easy. The T60x Series also employ a unique,
Proportional-Integral (PI) time-proportioning
algorithm that virtually eliminates temperature
offset associated with traditional, differentialbased thermostat controllers.
Refer to the T60xDFH-4 and T60xDFH-4+PIR
Series Thermostat Controllers with
Dehumidification and Occupancy Sensing
Capability Product Bulletin (LIT-12011582) for
important product application information.
Features
• onboard occupancy sensor (Passive
Infrared [PIR] Models) — provides energy
savings without additional installation
time/cost
• password protection option — protects
against undesired thermostat controller
tampering
• diagnostic Light-Emitting Diode (LED) in
PIR models — provides visual confirmation
of motion detection during installation for a
period of up to 30 minutes
• dehumidification capability
(dehumidification models) — increases
occupancy comfort by providing
dehumidification
• backlit Liquid Crystal Display (LCD) —
offers real-time control status of the
environment in easy-to-read, English plain
text messages with constant backlight that
brightens during user interaction
• on/off, floating, or proportional 0 to 10 VDC
control — offers additional application
flexibility by providing more advanced
control signals
• three speeds of fan control — provide easy
FAN speed selection, via the interface key,
to meet the application requirements
• single and dual setpoint adjustments —
enable user setpoint options to
accommodate the specific application
• temperature scale selector key — offers
guests the ability to select a Fahrenheit (°F)
or Celsius (°C) temperature scale display
• simplified setpoint adjustment — enables
the user to change the setpoint by simply
pressing the UP/DOWN arrow keys
• two configurable binary inputs — provide
additional inputs for advanced functions
such as remote night setback, service or
filter alarms, motion detector, and window
status
• over 20 configurable parameters – enable
the thermostat controller to adapt to any
application, allowing installer parameter
access without opening the cover
Repair Information
If either the T60xDFH-4 or T60DFH-4+PIR
Series Thermostat Controller fails to operate
within its specifications, replace the unit. For a
replacement thermostat controller, contact the
nearest Johnson Controls® representative.
Selection Chart
Code Number Control Outputs Fan Control Dehumidification Capability Onboard Occupancy Sensor
T601DFH-4 Two On/Off Up to Three Speeds No No
T601DFH-4+PIR Two On/Off Up to Three Speeds No Yes
T602DFH-4 Two On/Off or Floating Up to Three Speeds No No
T602DFH-4+PIR Two On/Off or Floating Up to Three Speeds No Yes
T603DFH-4 Two On/Off or Floating Up to Three Speeds Yes No
T603DFH-4+PIR Two On/Off or Floating Up to Three Speeds Yes Yes
T604DFH-4 Two Proportional 0 to 10 VDC Up to Three Speeds No No
T604DFH-4+PIR Two Proportional 0 to 10 VDC Up to Three Speeds No Yes
T605DFH-4 Two Proportional 0 to 10 VDC Up to Three Speeds Yes No
T605DFH-4+PIR Two Proportional 0 to 10 VDC Up to Three Speeds Yes Yes
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
1 of 3
www.johnsoncontrols.com
T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification
T60xDFH-4 Series Thermostat Controller (Left) and
T60xDFH-4+PIR Series Thermostat Controller (Right)
Dimensions, in. (mm)
4-15/16
(125)
3-3/8
(86)
1-1/8
(29)
(125)
(86)
(36)
70.0ºF
Room Temp
°C
°F
Room Temp
and Occupancy Sensing Capability (Continued)
4-15/16
70.0ºF
°C
°F
3-3/8
1-3/8
FIG:dmnsns
Accessories
Code Number Description
SEN-600-1 Remote Inside Air Temperature Sensor
TE-6361M-1
TE-636S-1
TEC-6H-PIR
1. Additional TE-63xx-x Series 10k ohm Johnson Cont rols Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors
Product Bulletin (LIT-216320) for more de tails. When a TE-63xx-x Se ries Sensor is installe d according to remote sensing wiring, the th ermostat controller controls
based off the temperature sensed by the TE-63xx-x Series Sensor.
2. The TEC-6H-PIR Accessory Cover can be used to replace the existing cover on a non-PIR T60xDFH-4 Series Thermostat Controller to provide occupancy
sensing capability.
1
1
2
Duct Mount Air Temperature Sensor
Strap-Mount Temperature Sensor
Cover with Occupancy Sensor
Technical Specifications
T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and Occupancy Sensing Capability
Power Requirements 19 to 30 VAC, 50/60 Hz, 2 VA (Terminals 4 and 5) at 24 VAC Nominal, Class 2 or SafetyExtra-Low Voltage (SELV)
Relay/Triac Contact
Rating
Analog Output
Rating
Fan Relay Output Rating 19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush, Class 2 or SELV
Auxiliary Output
Rating
Digital Inputs Voltage-Free Contacts across Terminal Scom to Terminals BI1, BI 2, or UI3
Analog Inputs Resistive Inputs (RS and UI3) for 10k ohm Johnson Controls Type II Negative Temperature Coefficient (NTC)
Temperature Sensor Type Local 10k ohm Johnson Controls Type II NTC Thermistor Sensor
Wire Size 18 AWG (1.0 mm Diameter) Maximum, 22 AWG (0. 6 mm Diameter) Recommended
On/Off and Floating
Control
Proportional Control 0 to 10 VDC into 2k ohm Resistance (Minimum)
Triac Output 19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush, Class 2 or SELV
Thermistor Sensors
(Part 1 of 2)
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
2 of 3
www.johnsoncontrols.com
Loading...