T606MSx-4 and T606MSx-4+PIR Series
T606MSx-4 and T606MSx-4+PIR Series Controllers
Multi-Stage Temperature and Humidity Controllers
Description
The T606MSN-4 and T606MSN-4+PIR Series Non-programmable and
T606MSP-4 and T606MSP-4+PIR Series Programmable Temperature
and Humidity Controllers are specifically designed for control of multistage heating and cooling equipment, such as rooftop or self-contained
units with a humidifier and/or dehumidifier.
The T606MSx-4+PIR Series Controllers have occupancy sensing
capability built into the device. These are stand-alone devices that
maximize up to 30% energy savings in high-energy usage light
commercial buildings, such as schools and hotels, during occupied
times by using additional setpoint strategies.
The T606MSx-4 and T606MSx-4+PIR Series Controllers provide
exceptional temperature control in an easy-to-use and flexible
package. All models have over 20 configurable parameters, enabling
the controllers to adapt to a variety of applications.
The T606MSx-4 and T606MSx-4+PIR Series Controller models
employ an embedded complete humidity solution with a unique,
Proportional-Integral (PI) time-proportioning algorithm that virtually
eliminates temperature offset associated with traditional, differentialbased controllers.
Refer to the T606MSx-4 and T606MSx-4+PIR Series Multi-Stage
Temperature and Humidity Controllers Product Bulletin
(LIT-12011654) for important product application information.
Features
• embedded humidification sequence (0 to 10 VDC output) and
dehumidification sequence (dry contact)
• onboard occupancy sensor (Passive Infrared [PIR] Models)
• password protection option
• backlit Liquid Crystal Display (LCD)
• simplified setpoint adjustment
• five easy-to-use interface keys
• three Light-Emitting Diodes (LEDs)
• one configurable digital input
• over 20 configurable parameters
• configurable auxiliary output
Repair Information
If either the T606MSx-4 or T606MSx-4+PIR Series Thermostat
Controller fails to operate within its specifications, replace the unit. For
a replacement thermostat controller, contact the nearest
Johnson Controls® representative.
Code No. LIT-1900669
Issued May 11, 2012
Accessories
Code Number Description
Hx-67 Series
TE-6361M-1
TE-6363P-1
TEC-3-PIR
1. The humidity sensor must have a 0 to 10 VDC output. Remote wall-mounted version can be used for remote return or room air humidity sensing with the sensor
mounted on the wall. Remote duct-mounted humidity sensor can be used f or remote return air humidity sen sing with the sensor mounted on the retu rn air d uct or
as a supply air humidity sensor used as a high limit protection.
2. Additional TE-63xx-x Series 10k ohm Johnson Controls® Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors Product
Bulletin (LIT-216320) for more details. When a TE-63xx-x Series Sensor is installed according to remote sensing wiring, the thermostat controller controls based
off the temperature sensed by the TE-63xx-x Series Sensor.
3. The TEC-3-PIR Accessory Cover can be used to repla ce the existing cover on a non-PIR T606MSx-4 Series Thermost at Controller to provide occupancy sensing
capability.
1
2
2
3
Duct- or Wall-Mount Humidity Sensor
Duct-Mount Air Temperature Sensor
Outside Air Temperature Sensor
Cover with Occupancy Sensor
Selection Chart
Code Number Onboard Occupancy Sensor Application
Non-programmable
T606MSN-4 No Multi-Stage Packaged Heating/Cooling Equipment with Humidifier and/or Dehumidifier
T606MSN-4+PIR Yes
Programmable
T606MSP-4 No Multi-Stage Packaged Heating/Cooling Equipment with Humidifier and/or Dehumidifier
T606MSP-4+PIR Yes
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
www.johnsoncontrols.com
1 of 2
T606MSx-4 and T606MSx-4+PIR Series Multi-Stage Temperature and Humidity
4-15/16
(125)
3-3/8
(86)
1-1/8
(29)
4-15/16
(125)
3-3/8
(86)
1-3/8
(36)
FIG:dmnsns
27.0 %RH
70.0 °F
27.0 %RH
70.0 °F
T606MSx-4 Series Controller (Left) and T606MSx-4+PIR Series Controller (Right)
Dimensions, in. (mm)
Controllers (Continued)
Technical Specifications
T606MSx-4 and T606MSx-4+PIR Series Controllers
Power Requirements 19 to 30 VAC, 50/60 Hz, 2 VA (Terminals RC and C) at 24 VAC Nominal, Class 2 or Safety Extra-Low Voltage
Relay Contact Rating (Y2, Y1, G, W1, W2, and
AUX)
Digital Input Voltage-Free Contacts across Terminal C to Terminal DI
Humidification Analog Output Rating 0 to 10 VDC into 2k ohm Resistance Minimum
Wire Size 18 AWG (1.0 mm Diameter) Maximum, 22 AWG (0. 6 mm Diameter) Recommended
Temperature Sensor Type Local 10k ohm Johnson Controls Type II Negative Temperature Coefficient (NTC) Thermistor Sensor
Temperature Range Backlit Display -40.0°F/-40.0°C to 122.0°F/ 50.0°C in 0.5° Increments
Heating Control 40.0°F/4.5°C to 90.0°F/32.0°C
Cooling Control 54.0°F/12.0°C to 100.0°F/38.0°C
Accuracy Temperature ±0.9F°/±0.5C° at 70.0°F/21.0°C Ty pical Calibrated
Humidity ±5% RH from 30 to 70% RH at 50 to 90°F (10 to 32°C)
Minimum Deadband 2F°/1C° between Heating and Cooling
Ambient Conditions Operating 32 to 122°F (0 to 50°C); 95% RH Maximum, Noncondensing
Storage -22 to 122°F (-30 to 50°C); 95% RH Maximum, Noncondensing
Compliance United States UL Listed, File E27734, CCN XAPX, Under UL873, Temperature Indicatingand Regulating Equipment
Canada UL Listed, File E27734, CCN XAPX7,
Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requ irements
Shipping Weight T606MSx-4 Models: 0.75 lb (0.34 kg)
Australia and New
Zealand
(SELV)
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum 3.0 A Inrush, Class 2 or SELV
FCC Compliant to CFR 47, Part 15, Subpart B, Class A
Under CAN/CSA C22.2 No. 24, TemperatureIndicating and Regulating Equipment
Industry Canada, ICES-003
and other relevant provisions of the EMC Directive 2004/108/EC.
C-Tick Mark, Australia/NZ Emissions Compliant
T606MSx-4+PIR Models: 0.77 lb (0.35 kg)
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
2 of 2
www.johnsoncontrols.com
Loading...