Johnson Controls SEN-600-1G Data Sheet

Product Bulletin Issue Date February 10, 2005
Remote Indoor, Outdoor, and Duct Mount
Temperature Sensors
The SEN-600-x Series of remote temperature sensors offers many options for remote sensing of indoor or outdoor temperatures for the T600 Series of programmable and non-programmable thermostats and the TEC2100 Metasys® system N2 networked thermostats. Additionally, a duct mount sensor is available for remote sensing of mixed air temperatures with the T600MEP or TEC2104 economizer thermostats.
Remote indoor air sensors are available in a sensing only model (SEN-600-1) or with an occupancy status Light-Emitting Diode (LED) and occupancy override button (SEN-600-4). Up to three remote indoor temperature sensors can be wired together for averaging.
Remote outdoor air sensors are available in an outdoor air shield (SEN-600-2) or in a duct mount configuration (SEN-600-3). The duct mount sensor can also be used for mixed air temperature sensing on the T600MEP and TEC2104 economizer thermostats. Both the outdoor air and duct mount sensors are wired directly to the thermostat and can be wired in a series parallel arrangement for averaging.
Features and Benefits
! Single Assembly Ordering Simplifies ordering; provides complete
assembly (sensor and mounting hardware) in one box
! Remote Room Sensor with
Override Button
Enables the user to override the unoccupied setpoints with the occupied setpoints from the remote sensor
! Remote Sensor Averaging Allows averaging of up to three remote indoor
sensors
! Noncorrosive
Thermoplastic Enclosure (SEN-600-2 and SEN-600-3)
Resists environmental effects with a durable, easy-to-use, standard conduit enclosure
Figure 1: SEN-600-x Temperature Sensors
© 2005 Johnson Controls, Inc. Code No. LIT-1201666 www.johnsoncontrols.com
1

Product Overview

5
7

SEN-600-1 Remote Indoor Temperature Sensor includes:

sensor
mounting hardware
4.94 125
3.38 86
1.13 29
Figure 2: SEN-600-1 Dimensions (in./mm)

SEN-600-3 Duct Mount Temperature Sensor includes:

8 in. (203 mm) 10 K ohm thermistor sensor
quick mount sensor holder and retainer
metal mounting plate with screws (4) and locknut
conduit enclosure with cover
wire nuts (2)
screws and anchors (2)
2.7
6.0
152.4
69.9
Plate Dimensions: 3 x 3 in. (76 x 76 mm)
1.72
43.
7.5
190.5
Figure 4: SEN-600-3 Dimensions (in./mm)

SEN-600-2 Outdoor Air Temperature Sensor includes:

3 in. (76 mm) 10 K ohm thermistor sensor
outdoor air shield
conduit enclosure with cover
wire nuts (2)
screws and anchors (2)
0.67
17.0
4.46
113.3
45°
3.47
88.1
1.38
35.0
6.0
152.4
Figure 3: SEN-600-2 Dimensions (in./mm)
SEN-600-4 Remote Indoor Temperature Sensor with Occupancy Override and LED includes:
sensor
mounting hardware
4.94 125
OVERRIDE
3.38 86
1.13 29
Figure 5: SEN-600-4 Dimensions (in./mm)
2 Remote Indoor, Outdoor, and Duct Mount Temperature Sensors Product Bulletin
Loading...
+ 1 hidden pages