
Marlow Toddler Bed
Instruction manual
IMPO RTAN T
R
ET AIN FO R FUT URE REFEREN C E
P
LEASE READ CAR EFULLY

2
Parts
(1)
(3)(2)
(4)
Bed sides x 2 Bed base x 1
Side r
ails of cot bed base x 2
(5)
Bolt ( M6 x 70 mm) x 8
Bolt ( M6 x 50 mm) x 2 Bolt ( M6 x 45 mm) x 4
A
B C D E
C
ylinder nut x 10
Hex
key x 2
Toddler Bed. Please read the instructions and warnings wolraM siht gnisahcrup rof uoy knahT
Your child's safety is your responsibility. If you have a query with this product or require
replacement parts, please contact your nearest John Lewis department store.
Only authorised additional /replacement parts should be used
Lay out the parts on a soft level surface and compare to the part and
gs checklist on
.strap eht lla evah uoy taht erus era uoy litnu gnigakcap yna dracsid ton oD .2 egap
Keep children clear during assembly as pack contains small parts which may present a
.drazah gnikohc
Recommended mattr
ess:
140 x 70cm.
This product complies with BS 8509: 2008 + A1: 2011
Fixings
Warning!
carefully before use to ensure safe and satisfactory operation of this product.
You will need:
1 x Flat- headed screwdriver
2 x Hex key (supplied)
Foot end x 1Head end x 1

3
Step 1
Step 2
(A)
(A)
(A)
(A)
(A)
(B)
(B)
(D)
(D)
(E)
(D)
(D)
(D)
(D)
(D)
(D)
(C)
(C)
(A)
(1)
(2)
(4)
(4)
(3)
(3)
8
2
8
D
E
A
2
2
D
B
Use the hex key provided (E) to engage bolts (C) to attach the
bed sides (part 4) onto the side rails (part 3) and tighten the bolts into position.
Engage the bolts (B) used to attach the head end (part 1) onto the bed sides (part 4)
- do not fully tighten the bolts (B) into position.
Use the hex key provided (E) to engage the bolt (A) into
the barrelnut (D), place the side rails (part 3) into the
(C)
(C)
4
C
(3)
(3)
(1)
frame - do not fully tighten the bolts (A) into position.

4
Step 3
(5)
base into position.
Place the mattress base (part 5) onto the frame and now
fully tighten the bolts (A) and (B) to secure the mattress