Marlow Cotbed
Instruction manual
IMPORTAN T
R
ETAIN FO R FUTURE REFEREN C E
P
LEASE READ CAREFULLY
2
Thank you for purchasing this Marlow Cotbed.
Please read the instructions and warnings carefully
before use to ensure safe and satisfactory operation of this product.
Your child's safety is your responsibility. If you have a query with this product or require
replacement parts, please contact your nearest John Lewis department store.
Only authorised additional /replacement parts should be used
Lay out the parts on a soft level surface and compare to the part and gs checklist on
page 2. Do not discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a
choking hazard.
Recommended mattr
ess:
140 x 70cm.
This product complies with BS EN 716 part 1 & 2: 2008 + A1:2013 and BS 8509: 2008 + A1: 2011
Fixings
Parts
You will need:
1 x Cross - headed screwdriver
1 x Hex key (supplied)
Bolt ( M6 x 70 mm) x 16
A
B
C
Cylinder nut x 16
Hex key x 1
(1a)
(2) (3)
(4)
Bed ends (1a) +(1b) x 2
Cot bed base x 1
Cot bed sides x 2
Side rails of cot bed base x 2
(1b)
Warning!
3
Step 1
Step 2
Use the hex key provided (C) to engage the bolt (A) into the barrel
nut (B), place the mattress base (part 4) onto the frame and tighten
the bolts (A) to secure the mattress base into position.
The cot has a choice of three mattress base positions. The lowest base position is
the safest, and should be used as soon as your baby is old enough to sit up.
Step 3
Step 4
4
Junior Bed assembly
Step 1
5
Use the hex key provided (C) to engage the bolt (A) into the barrel
nut (B), place the mattress base (part 4) onto the frame and tighten
the bolts (A) to secure the mattress base into position.
6
Care and maintenance
Your furniture may be cleaned by wiping with a damp cloth and drying with a soft clean cloth.
Do not use abrasives, bleach, alcohol or ammonia-based household polishes.
Take care when handling or moving the furniture. Careless handling may cause damage.
Safety notes
Warning! Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
Warning!
Keep children clear during assembly as pack contains small parts which may present a choking hazard.
Warning! Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the
manufacturer.
Warning!
Do not leave anything in the cot or place the cot close to another product, which could provide a
Warning! Do not use more than one mattress in the cotbed.
The lowest base position is the safest, and should be used as soon as your baby is old enough to sit up.
The thickness of the mattress chosen must not reduce the internal depth (from the top of the mattress surface to the
top of the side) to less than 500mm with the base in its lowest position or 200mm with the base in the highest
position.
The mattress should be no more than 30mm shorter or narrower than the internal length or width of the cotbed.
loose, and that there is no risk of clothing or parts of the body becoming snagged or trapped.
To prevent falls, when the child is able to climb out of the cot, the cot should no longer be used for that child.
Do not allow your child to jump on the cotbed. This may result in damage to the furniture and/or injury to your child.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
www.johnlewis.com
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.
Warning!
Loading...