John Lewis JLDWW 1201 User Manual
JLDWW 1201
Dishwasher
Instruction manual
It is most important that this instruction book should be retained with the appliance for future reference.Should
the appliance be sold or transferred to another owner,or should you move house and leave the appliance,always
ensure that the book is left with the appliance in order that the new owner can get to know the functioning of
the appliance and the relevant safety information.
This information has been provided in the interest of your safety.You MUST read it carefully before installing or
using the appliance.
Installation
● This appliance is heavy.Care should be taken when moving
it.
● Check your dishwasher for any transport damage.
Never connect a damaged machine.If your dishwasher is
damaged,you should contact the John Lewis Branch from
which you purchased.
● For safety reasons it is dangerous to alter the
specifications or attempt to modify this product in any way.
● Any electrical and plumbing work required to install this
appliance should be carried out by a qualified and
competent person.
● Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
● The sides of the dishwasher must never be drilled to
prevent damage to hydraulic components.
Child safety
● This appliance is designed to be operated by adults.
● Children should not be allowed to tamper with the
controls or play with the product.
● Packaging parts may be dangerous for children,who could
even be suffocated! You should therefore keep all packaging
well away from children.
● The water in your dishwasher is not for drinking.
Detergent residues may still be present in your machine.
Keep children well away from your dishwasher when the
door is open.
● Keep all detergents in a safe place out of children's reach.
Your dishwasher in day-to-day use
● Items that are contaminated by petrol,paint,steel or iron
debris,corrosive,acidic or alkaline chemicals must not be
washed in this dishwasher.
● Under no circumstances should you open the door whilst
the appliance is in operation,especially during the washing
phase,hot water may escape.However, if the door is
opened,a safety device ensures that the machine stops.
● Only use products (detergent,salt and rinse aid)
specifically designed for use in dishwashers.
● Long bladed knives stored in an upright position are a
potential hazard.
● Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
● Ensure that the door of the dishwasher is always closed
when it is not being loaded or unloaded.In this way you
will avoid anybody tripping over the open door and hurting
themselves.
● When finishing loading or unloading close the door, as an
open door can be a hazard.
● Do not sit or stand on the open door.
● Isolate the appliance from the power supply and turn off
the water supply after use.
● This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
● Under no circumstances should you attempt to repair the
machine yourself.Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact our extended warranty administrators on 0870
0107887 who will give you details for your local Service
Force centre.
Always insist on genuine spare parts.
Important safety information
2
Important safety information 2
Contents 3
Disposal 4
Economical and ecological dishwashing 4
Description of the appliance 5
The control panel 6
Prior to using for the first time 7
The water softener 7
Filling with dishwasher salt 8
Rinse aid 9
In daily use 10
Loading cutlery and dishes 10
The lower basket 10
The cutlery basket 11
Removable knife basket 11
The upper basket 11
Adjusting the height of the upper basket 12
Use of detergent 12
Different kinds of detergent 13
Washing programmes 14
Starting a washing programme 15
Maintenance and cleaning 17
Cleaning the filters 17
Prolonged periods of non-operation 17
Frost precautions 17
Moving the machine 17
Something not working 18
Repairs - After Sales Service 19
Spare parts 19
Installation instructions 20
Fitting under a counter 20
Levelling 20
Technical specifications 20
Water supply connections 21
Water outlet hose connection 21
Electrical connection 22
Hints for test centres 23
Contents
3
Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
Plastic parts are marked with standard international
abbreviations:
>PE< for polyethylene,e.g.sheet wrapping material.
>PS< for polystyrene,e.g. padding material (always CFC-
free).
>POM< for polyoxymethylene,e.g.plastic clips.
Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for
recycling.
As and when you cease to use your dishwasher and withdraw
it from service,your should render it unserviceable before
having it disposed of.
Warning! Children at play could lock themselves in your
dishwasher or otherwise endanger their lives.Therefore cut
off the power supply cable and make the door closing device
unusable to prevent children from being trapped inside.
For the disposing of the appliance please take it to a recycling
centre or to your dealer who may, for a small contribution to
the costs,dispose it for you.
Economical and ecological
dishwashing
● Ensure that the water softener is correctly adjusted.
● Do not pre-wash under running water.
● Select the wash programme to suit the nature and degree
of the soiling on the dishes.
● Do not use more detergent,dishwasher salt and rinse aid
than is recommended in these operating instructions and
by the manufacturer of the respective product.
Disposal
4
Description of the appliance
5
1. Upper basket stop
2. Water hardness dial
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Worktop
IN144
Function buttons: in addition to the dishwashing
programme selected,the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the rinse aid dispenser,
- the cancelling of a washing programme.
Programme selection buttons:the selection of a
washing programme occurs by pressing one of these buttons
(see "Washing programmes" chart).
The digital display indicates:
- the level of hardness to which the water softener is set,
- if the rinse aid dispenser is activated/deactivated,
- the approximative remaining time of the running
programme,
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
"Delay start" button: this option allows the start of
the programme to be delayed from 1 to 19 hours.
"3 in 1" button: This appliance is equipped with the
function 3 in 1,that allows the use of the "3 in 1" combi
detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this function (button indicator light illuminated
) it will remain active also for the following washing
programmes,to deactivate the function,press the button
(button indicator light off).
Indicator lights: have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
The control panel
6
Function buttons
Indicator lights
Digital display
Door handle
"Delay start" button
On/Off indicator light
On/Off button Programme selection
buttons
"3 in 1" button
Salt salt refilling indicator light,
illuminates when the salt has run
out.
Rinse aid rinse aid refilling indicator light,
illuminates when the rinse aid has
run out.
Programme time illuminates when a washing
programme has been set and
remains illuminated for all the
duration of the washing programme.
Turns off when the washing
programme has ended.
When the delay start has been set,
this indicator light turns off and will
illuminate again once the countdown
of the delay start has elapsed and
the washing programme has started.
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with dishwasher salt
5. Fill the rinse aid dispenser
The water softener
The dishwasher is equipped with a water softener designed
to remove minerals and salts from the water supply, which
would have a detrimental or adverse effect on the operation
of the appliance.
The higher the content of these minerals and salts,the harder
your water is.
Water hardness is measured in equivalent scales,Clarke
degrees,French degrees (°TH) and mmol/l (millimol per litre international unit for the hardness of water).
The softener should be adjusted according to the hardness of
the water in your area.Your local Water Authority can advise
you on the hardness of the water in your area.
The water softener must be set in both ways:manually,using
the water hardness dial and electronically,using the function
push buttons on the control panel.
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see
table).
4. Replace the lower basket.
The dishwasher is factory set
at position 2.
b) Setting electronically
(The dishwasher must be switched off)
The dishwasher is factory set at level 5.
1. Press the On/Off button.The On/Off indicator light
illuminates (setting mode).
If other indicator lights are on,this means that a wash
programme has been selected.The programme must be
cancelled:press simultaneously the function buttons 2 and 3
for about 2 seconds.All the indicator lights will turn off (except
for the On/Off indicator light and eventually salt and rinse aid
indicator lights) indicating that the set programme has been
cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function buttons 1,2 and 3 start flashing.
3. Press the function button 1,the indicator lights of function
buttons 2 and 3 turn off while the indicator light of the button
1 goes on flashing,the digital display indicates the current level.
Exampel: = level 5
4. To change the level,press button 1.Each time the button
is pressed the level changes.(For the selection of the new
level see the chart).
Examples:
if the current level is 5,by pressing button 1 once, level 6
is selected.
if the current level is 10,by pressing button 1 once, level 1
is selected.
5. To memorise the operation,switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
Prior to using for the first time
7
Clarke
degrees
°TH mmol/l Range
manually
electronically
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
IV
IV
IV
IV
IV
III
III
II
I/II
I
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
2
2
2
2
2
2
1
1
1
1
level 10
level 9
level 8
level 7
level 6
level 5
level 4
level 3
level 2
level 1
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
Water hardness
Adjusting the
water hardness setting
Level indicated
in the
digital display
Use
of salt
AA07
Filling with dishwasher salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use
in a dishwasher, especially table salt, will damage the
water softener.
Only fill with salt just before starting one of the
complete washing programmes.
This will prevent any grains of salt or salty water,
which may have been spilt,remaining on the bottom
of the machine for any period of time,which may
cause corrosion.
To fill:
1. Open the door,remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is
necessary only before filling with salt for the first
time).
3. Using the funnel
provided,pour in the salt
until the container is full.
4. Replace the cap making
sure that there is no
trace of salt on the screw
thread or on the gasket.
5. Replace on the cap tightly
turning it clockwise until
it stops with a click.
The salt container will require topping up periodically.You are
reminded of this by the salt indicator light on the control
panel which comes on when the salt has finished.
The salt indicator light on the control panel can
remain illuminated for 2-6 hours after the salt has
been replenished,assuming the dishwasher remains
switched on.If you are using salts that take longer to
dissolve then this can take longer.The function of the
machine is not affected.
Do not worry if water over flows from the unit when filling
with salt,this is quite normal.
8
SALE
ZOUT
SALT
SALZ
SEL
SR14
Loading...