John Lewis JLC95-3-B-W-09 User Manual

Page 1
John Lewis JLC95/3-B/W-09
Flat-screen television stand
Instruction manual
Page 2
Thank you for purchasing this flat-screen television stand. Please read the instructions carefully to ensure safe and satisfactory operation of this product. Retain this information for future reference.
WARNING!
Before starting this assembly please take time to familiarise yourself with the components listed below.
Do not place very hot or very cold items against or in close proximity to glass surfaces unless an adequately thick insulating material is used to prevent such items coming into contact with the glass.
Do not strike the glass with hard or pointed items.
Do not sit or stand upon horizontal glass surfaces.
Maximum safe load for top glass shelf is 60kg.
Component
a
b
c
d
e
Description
Top shelf frame
Lower shelf frame
Left hand leg
Right hand leg
Back panel
Qty
1
1
1
1
1
Packed by
f
g
h
j
k
m
n
o
Top Glass Shelf
(8mm thick)
Glass Shelf
(5mm thick)
Fascia panel (black/walnut)
Fixing screw
Allen key
Shelf support pin
Self-adhesive
shelf buffer
Cable tidy clip
1
2
1
15
1
4
18
2
Page 3
Stage 1
a
e
c
j
m
d
j
b
m
Attach left leg , right leg and back panel to top shelf frame and lower shelf frame using screws and allen key . Only fully tighten screws once all components have been attached.
k
c
d
e
a
b
x12
x4
j
Insert shelf support pins into holes in legs and back panel.
m
Stage 2
n
f
g
g
n
Attach self-adhesive shelf buffers to shelf frames in positions shown.
Carefully place glass shelves and glass top shelf onto shelf buffers with the black painted surface of the glass on the
underside.
n
g
f
x18
Page 4
Stage 3
h
j
j
x3
Attach fascia panel to top shelf frame using screws . The fascia panel can be attached either way round depending on the desired finish, black or walnut.
h
j
Stage 4
o
Remove protective film from cable tidy clips and attach to rear of back panel.
John Lewis Partnership 171 Victoria Street London SWIE 5NN www.johnlewis.com
o
o
Loading...