John Lewis JL120-2-B-W-09 User Manual

John Lewis JL120/2-B/W-09
Flat-screen television stand
Instruction manual
Thank you for purchasing this flat-screen television stand. Please read the instructions carefully to ensure safe and satisfactory operation of this product. Retain this information for future reference.
WARNING!
Before starting this assembly please take time to familiarise yourself with the components listed below.
Do not place very hot or very cold items against or in close proximity to glass surfaces unless an adequately thick insulating material is used to prevent such items coming into contact with the glass.
Do not strike the glass with hard or pointed items.
Do not sit or stand upon horizontal glass surfaces.
Maximum safe load for top glass shelf is 50kg. Maximum safe load for lower glass shelf is 20kg.
Component
a
b
c
d
e
Description
Top shelf frame
Lower shelf frame
Leg
Back panel
Top Glass Shelf
(smaller than f below)
Qty
1
1
2
1
1
Packed by
f
g
h
j
k
m
Glass Shelf
Fascia panel (black/walnut)
Fixing screw
Allen key
Self-adhesive
shelf buffer
Cable tidy clip
1
1
15
1
12
2
Stage 1
c
a
d
h
c
b
h
x12
Attach legs , and back panel to top shelf frame and lower shelf frame using screws and allen key . Only fully tighten screws once all components have been attached.
c
d
a
b
h
Stage 2
e
k
f
j
k
Attach self-adhesive shelf buffers to shelf frames in positions shown.
Carefully place glass shelf and glass top shelf onto shelf buffers with the black painted surface of the glass on the underside.
k
f
e
x12
Stage 3
g
h
h
Attach fascia panel to top shelf frame using screws . The fascia panel can be attached either way round depending on the desired finish, black or walnut.
g
h
Stage 4
m
x3
Remove protective film from cable tidy clips and attach to rear of back panel.
John Lewis Partnership 171 Victoria Street London SWIE 5NN www.johnlewis.com
m
m
Loading...