John Lewis FESTOON 10 LIGHT LED User Manual

Recommended bulb

Only use 36V DC 0.5W ES LED bulb(s).

FESTOON 10 LIGHT LED
OUTDOOR LINE LIGHT

Specification

Voltage: 36V DC
Number of LED Bulbs: 10
Lamp holder: ES
Lumens per bulb: 45
Transformer: 36V 6W
IP Rating: 44
Net Weight: 1.1 Kgs

Quality Guaranteed

At John Lewis & Partners we test every light to high quality standards, so we can offer a
2-year guarantee.

Recycling

Please retain these instructions for future reference.

This symbol indicates that this product should not be treated as normal house-hold waste
and it should be recycled. John Lewis does not operate in store take back, but as members of
the Distributer Take Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.

We have taken great care to ensure that this product reaches you in perfect condition. However,
should any parts be damaged or missing please contact the customer service team on
03300 552762.

USER GUIDE

9.5m (31.17ft) approx.

5m

(16.4ft)

approx. Bulb spacing: 50cm

4.5m

(14.7ft) approx.

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
Johnlewis.com

Made in China

Thank you for purchasing this Festoon 10 light LED outdoor line light. Please read the
instructions carefully before use to ensure safe and satisfactory operations of this product. Please
keep these instructions for future reference.

Warnings

This product is suitable for Indoor and Outdoor use, the transformer must be plugged indoors.
Keep out of the reach of children and pets.

Ensure there is adequate airflow around each bulb.

Do not damage the insulation of the cable.
Do not connect the light set electrically to any other light set.
Do not connect the product directly to the mains. Only use the light set with the transformer
supplied.

Do not expose to direct heat or flame.

Disconnect from the mains when not in use.
If the cable of the product is damaged the product must be destroyed.

When changing a bulb always switch off at the mains first.

Do not remove or insert lamps whilst the chain is connected to the supply.

Ensure that all lamp holders are fitted with a lamp and they are securely fitted to prevent

water ingress.

Installation instructions

1) Carefully remove the product from the packaging and unravel the cable ensuring there are no
twists or snags.

2) Decide where the product is to be displayed. Take care when deciding to prevent a tripping
hazard.

3) Connect the plug located on the end of the light set into the transformer and secure in place
using the securing ring (A).

A

Securing ring

B

Care and maintenance instructions

This product is fitted with replaceable LED bulbs.

Only use 36V DC 0.5W ES LED bulb(s).
We recommend cleaning with a soft, dry cloth. Do not use abrasive materials, as these will

damage the finish.

To use

Plug the transfomer into a mains socket and switch on.