Milan Bed
PRE-ASSEMBLY PREPARATION
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or e-mail mail@fwgroup-uk.com
Small double choc - 803/45906
Small double ivory - 803/46203
Double choc - 803/45902
Double ivory - 803/46204
John Lewis
For product support or spare parts please call
the John Lewis Helpline:
T: 01244 689949
E: mail@fwgroup-uk.com
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Thank you for purchasing this Milan bed. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
1/6
Double black - 803/46101
King choc - 803/45903
King ivory - 803/46205
King black - 803/46102
Fittings and parts checklist
A
B
C
D
E
F
M5 Allen Key x 1
M4 Allen Key x 1
Side Plastic Caps x 30
Centre Plastic Caps x 15
JCBC M6 x 25mm Bolt x 2
JCBC M6 x 40mm Bolt x 8
1
2
3
4
5
6
Headboard x 1
Footboard x 1
Side Rails x 2
Slats x 30
Centre Rail x 1
Legs x 4
2/6
3/6
M5
BRACKET
SIDE RAIL
Step Two
Place metal fixing on Side Rails (3) over pre-inserted bolts in Headboard (1) and Footboard (2) and
hand-tighten bolts to loosely secure parts together. Do not tighten with M5 Allen Key (F) until you have
inserted the Centre Rail in Step Three.
Step by step assembly instructions
Step One
Place Wooden Legs (6) over the holes in the underside of the Headboard (1) and Footboard (2) as per
drawing. Insert 2 M6 x 40mm bolts (B) to fix each leg in place and tighten using Allen Key M4 (E) provided.
M5 x 1
M4 x 1
M6 x 40mm x8
B
F
E
g. 1
M6 x 40 bolt
M6 x 40 bolt
M6 x 40 bolt
Allen Key
Bed Leg
Preinserted Nut
Head/Foot
Board
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
STEP THREE
4/6
M4 x1
M6 x 25mm x2
Side Plastic Cap (30 pcs)
Centre Plastic Cap (15 pcs)
Bent Slat (30pcs)
Step Three
Insert Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2).
Push down fully and secure in place using M6 x 25mm bolt (A) and tighten bolt with Allen Key M4 (E).
You can now tighten the bolts at the Side Rails from the previous step (Step Two) so all fastenings are
now tightened.
Step Four
Take two Slats (4) ensuring the curved side is facing up and join them together with a Centre Plastic
Cap (C) then place a Side Plastic Cap (D) on the other end of the Slats. Fix the Slat to the bed by first
inserting the Side Plastic Cap (D) into the holes in the Side Rail (3) then Centre Plastic Cap (C) into the
holes in the Centre Rail (5).
Centre Rail
4
C
D
Side Rail
Side Plastic Cap
Slat
Slat
Slat
Centre Plastic Cap
Centre Rail
A E
g. 3
g. 4
g. 5
M6 x 25mm
g. 2
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE
RAILS (FROM STEP TWO)
5/6
Step Five
This bed is now ready to use.
6/6
Care and Maintenance
Safety Instructions
This Milan bed should be cleaned using a soft, damp cloth and dried immediately.
Do not use a very wet cloth or allow any liquid contact for a long period of time as this can
permanently damage the surface.
Do not use detergents and do not rub as this can cause permanent damage.
Always protect your bed from direct sunlight as this may accelerate the natural ongoing
discolouration process.
Screws holding together the bed frame should be tightened regularly.
Please retain this information leaflet for future reference.
This product complies with BS EN 1725:1998.
If you require any additional information or have any issues with this product please call
the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.
www.johnlewis.com
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury. Furniture can be dangerous if incorrectly installed. Any assembly should be
carried out by a competent adult. No liability will be accepted for damage or injury caused by
incorrectly installed or assembled furniture. During assembly, children should be kept away from the
product due to possible risk of injury. Do not use this item if any components are missing or
damaged.
It is recommended that care is taken when moving heavy objects to a new location to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
Loading...