John Deere X700, X728, X720, X740 User Manual
45 L
Return to Index
OADER FOR
X700 U
LTIMATE
T
WO
™
T
RACTORS
-W
HEEL
-S
TEER
FEATURES
• Approved for use on Two-Wheel-Steer X700
Ultimate™ Tractors.
• The 45 Loader Quik-Tatch design, mower
compatibility, and ease of operation make it
ideal for many residential and light-commercial
customers.
• Quik-Tatch design permits almost effortless
installation in less than 5 minutes.
• Loader can be operated with mower installed,
if desired.
• Suited for many jobs, including moving and
spreading yard and driveway materials,
loading light and medium-weight material,
and snow removal.
• Heavy-duty loader construction resists everyday
wear and tear for long life.
• Double-acting hydraulic cylinders provide
required down-pressure for excellent
digging action.
• Dual hydraulic levers with fl oat position, on tractor, give you fi ngertip control of the loader.
• Tractor’s hydraulic pump powers loader smoothly
and evenly.
• Hydrostatic relief valve (included with loader)
protects tractor transaxle against harmful
pressure peaks.
• Optional frame or 3-point-hitch-mounted ballast
box and wheel weights improve stability and
increase loader performance.
• Grille guard is standard equipment; protects
tractor when loader boom is raised.
• A 48-inch bucket is also standard, provides
5-cubic-foot capacity.
• Ballast box available for adding weight to rear
of tractor to improve traction and stability when
using loader.
• A worklight kit is available if the loader is to be
used after daylight hours.
C&CE PURCHASING GUIDE 2008
174
SPECIFICATIONS
Return to Index
X700, X720, X740 X728, X748
Two-Wheel-Steer Tractors Four-Wheel-Drive Tractors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifi cations are Based on Tractors with These Tires:
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18×8.50-8 4-ply 18×8.50-8 4-ply
Rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26×12.00-12 2-ply 26×12.00-12 2-ply
Dimensions:
A) Maximum Lift Height to Pivot Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 in. (185 cm) 73 in. (185 cm)
B) Maximum Clearance Under Fully Dumped Bucket . . . . . . . . . . . . . . . .69 in. (175 cm) 69 in. (175 cm)
C) Maximum Clearance Under Fully Dumped Bucket . . . . . . . . . . . . . . . .57 in. (145 cm) 57 in. (145 cm)
D) Reach with Bucket Dumped at 45 deg. at Max Height. . . . . . . . . . . . .23 in. (58 cm) 23 in. (58 cm)
E) Maximum Bucket Dump Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 degrees 45 degrees
F) Reach with Bucket on Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44.4 in. (113 cm) 43.3 in. (110 cm)
G) Bucket Rollback Angle on Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 degrees 25 degrees
H) Digging Depth Below Ground Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 in. (10 cm) 4 in. (10 cm)
Overall length with frame-mounted ballast box
(front edge of bucket fl at on the ground) . . . . . . . . . . . . . . . . . . . . . . . .112.4 in. (285 cm) 112.4 in. (285 cm)
Bucket:
Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 in. (122 cm) 48 in. (122 cm)
Capacity (struck). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.0 cu. ft. (.142 cu. meters) 5.0 cu. ft. (.142 cu. meters)
Hydraulics System:
Rated Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,000 psi 1,000 psi
Lift Cylinder Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.75 in. (4.4 cm) 1.75 in. (4.4 cm)
Bucket Cylinder Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.75 in. (4.4 cm) 1.75 in. (4.4 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .515 lb. (234 kg) 515 lb. (234 kg)
Ballast Requirements (note):
With 26-in. Rear Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minimum of 750 lb. (340 kg) rear ballast Minimum of 750 lb. (340 kg) rear ballast
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(at least 250 lb. (113 kg) of this must be (at least 250 lb. (113 kg) of this must be
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .on rear wheels) on rear wheels)
NOTE: Ballast may be required. See John Deere Price List or Operator’
s Manual for required ballasting.
C&CE PURCHASING GUIDE 2008
175
Loading...