John Deere 132 Parts Catalog

HP1102 -UN-01JAN94

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

JOHN DEERE 132" BELT PICKUP WITH PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

DATE OF MANUFACTURE

BELT PICKUPS SIZE DATE

110" ( - ) 132" ( - ) 154" ( - )

PICKUP PLATFORMS SIZE MODEL DATE

12’ 912 (1988-1993) 13-1/2’ 914 (1988- )

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99) 5-1

PN=1

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

SERIAL NUMBER PLATE

USE ALL NUMBERS, LETTERS, AND SPACES SHOWN ON THE SERIAL NUMBER PLATE IN WARRANTY CORRESPONDENCE.

PICKUP PLATFORM (625001- )

ON THESE PLATFORMS, THE SERIAL NUMBER PLATE IS LOCATED ON THE LEFT-HAND SIDE OF THE FRAME.

EXAMPLE: H00912X625001 PICKUP PLATFORM

(FIRST LINE) H0 - FACTORY (HARVESTER WORKS) 0912 - PLATFORM MODEL X - CONFIGURATION/MODEL SUFFIX 625001 - PLATFORM SEQUENCE NUMBER (SERIAL NUMBER) (SECOND LINE) PICKUP PLATFORM - PRODUCT TYPE

NOTE: BELT PICKUPS DO NOT HAVE SERIAL NUMBERS. CHANGES TO BELT PICKUPS ARE SHOWN BY YEARS.

IMPORTANT

THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE THREE-ROLLER BELT AND PICKUP PLATFORM. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.

SERIAL NUMBER LISTING INFORMATION

SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED, FOR EXAMPLE:

- THE PART CAN BE USED ON ALL MACHINES. 000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED.

-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

5-2 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (28-FEB-00)

PN=2

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

DIRECTION ARROW

ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS

A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS

KIT INFORMATION CAN BE FOUND IMMEDIATELY AFTER THE STORY IN WHICH IT IS USED. THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND ALL OTHER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS

THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION

BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS AREPROPERTY CLASS

8.8 OR LOWER.

SI UNITS OF MEASURE

METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS

THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ POSI-TORQ™

DIAL-A-MATIC™ TORQ-GARD SUPREME® HARVESTRAK™ QUIK-TATCH™

CHANGE INDICATOR LINE

CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE L.H. MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

FUNCTION CODE (EXAMPLE - FC: 5000)

FUNCTION CODES ARE LOCATED ON EACH PAGE IN THE UPPER RIGHT-HAND CORNER. THE CODE LISTED IS A GROUPING CODE THAT CAN BE USED FOR WARRANTIES AND FOR DTAC TO IDENTIFY CERTAIN AREAS.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 5-3

PN=3

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

SECTION INDEX

SECTION 05 - GENERAL INFORMATION SECTION 10 - ROLLERS AND SUPPORTS SECTION 15 - FRAME, STRIPPERS, DIVIDERS AND PLATES SECTION 20 - HEADER HEIGHT CONTROL SECTION 25 - AUGER AND DRIVE SECTION 30 - HYDRAULICS SECTION 35 - IDLERS, TIGHTENERS AND SHIELDS SECTION 40 - BELTS, CHAINS, SHEAVES, SPROCKETS AND DECALS SECTION 45 - NUMERICAL INDEX

5-4 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99)

PN=4

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

ALPHABETICAL INDEX

GRID PAGE GRID PAGE

A C

A14 ARMS, FINGER HOLD-DOWN A18 CENTER DRIVE

( -655150) .............................................................. 10 - 3 ( -655150) .............................................................. 10 - 7

A15 ARMS, FINGER HOLD-DOWN A19 CENTER DRIVE

(655150- ) .............................................................. 10 - 4 (655151- ) .............................................................. 10 - 8

C14 AUGER ADJUSTMENT BRACKETS C16 CHAIN, CROSS AUGER DRIVE

( -655150) .............................................................. 25 - 12 ( -635100) .............................................................. 25 - 14

C15 AUGER ADJUSTMENT BRACKETS C18 CHAIN, CROSS AUGER DRIVE

(655151- ) .............................................................. 25 - 13 (635101-655150) .......................................................... 25 - 16

C12 AUGER AND SHAFT C20 CHAIN, CROSS AUGER DRIVE

(655151- ) .............................................................. 25 - 10 (655151-665150) .......................................................... 25 - 18

C12 AUGER COVER C22 CHAIN, CROSS AUGER DRIVE, 14’ BPU

(655151- ) .............................................................. 25 - 10 (665151- ) .............................................................. 25 - 20

C24 AUGER DRIVE, CROSS (SIDEHILL) E6 CHAIN, DRIVE, ON R.H. SIDE ........................................ 40 - 1

(PICKUP PLATFORM)(615251-640500) ...................... 25 - 22 C16 CLUTCH, SLIP, CROSS AUGER DRIVE

D1 AUGER DRIVE, CROSS (SIDEHILL) ( -635100) .............................................................. 25 - 14

(PICKUP PLATFORM)(645301-655300) ...................... 25 - 24 C18 CLUTCH, SLIP, CROSS AUGER DRIVE

D3 AUGER DRIVE, CROSS (SIDEHILL) (635101-655150) .......................................................... 25 - 16

(PICKUP PLATFORM)(655301- ) .......................... 25 - 26 C20 CLUTCH, SLIP, CROSS AUGER DRIVE

C5 AUGER FLIGHT EXTENSIONS (655151-665150) .......................................................... 25 - 18

(655151- ) .............................................................. 25 - 2 C22 CLUTCH, SLIP, CROSS AUGER DRIVE, 14’ BPU

C12 AUGER HUB (665151- ) .............................................................. 25 - 20

(655151- ) .............................................................. 25 - 10 D22 CONVERSION HOSES AND COUPLERS

B17 AUTO BELT SPEED (600001-622500) .......................................................... 30 - 16

( -655150) .............................................................. 20 - 8 D9 COUPLER, BRACKET, HYDRAULIC LINES

B19 AUTO BELT SPEED ( -655150) .............................................................. 30 - 2

(655151- ) .............................................................. 20 - 10 D10 COUPLER, BRACKET, HYDRAULIC LINES

(655151- ) .............................................................. 30 - 3

D14 COUPLER, HYDRAULIC MOTOR

B ( -655150) .............................................................. 30

D16 COUPLER, HYDRAULIC MOTOR

B7 BACK SHEETS (655151- ) .............................................................. 30 - 10

( -655150) .............................................................. 15 - 12 C12 COVER, AUGER

B8 BACK SHEETS (655151- ) .............................................................. 25 - 10

(655251- ) ............................................................ 15 - 13 C12 CRANK, AUGER (655151- )...................................... 25 - 10

C12 BEARINGS, AUGER (655151- )................................ 25 - 10 C8 CROSS AUGER AND SPROCKET

A20 BEARINGS,CENTER AND IDLER ROLLERS DRIVE ( -635100) .............................................................. 25 - 6

( -655150) .............................................................. 10 - 10 C10 CROSS AUGER AND SPROCKET

A21 BEARINGS,CENTER AND IDLER ROLLERS DRIVE (635101-655150) .......................................................... 25 - 8

(655151- ) .............................................................. 10 - 11 C16 CROSS AUGER DRIVE

B17 BELT SPEED, AUTO ( -635100) .............................................................. 25 - 14

( -655150) .............................................................. 20 - 8 C18 CROSS AUGER DRIVE

B19 BELT SPEED, AUTO (635101-655150) .......................................................... 25 - 16

(655151- ) .............................................................. 20 - 10 C20 CROSS AUGER DRIVE

B2 BELTS AND FINGERS .................................................... 15 - 7 (655151-665150) .......................................................... 25 - 18

B7 BOTTOM SHEET C24 CROSS AUGER DRIVE (SIDEHILL)

( -655150) .............................................................. 15 - 12 (PICKUP PLATFORM)(615251-640500) ...................... 25 - 22

B8 BOTTOM SHEET D3 CROSS AUGER DRIVE (SIDEHILL)

(655151- ) ............................................................ 15 - 13 (PICKUP PLATFORM)(655301- ) .......................... 25 - 26

D9 BRACKET, HYDRAULIC LINES C22 CROSS AUGER DRIVE, 14’ BPU

( -655150) .............................................................. 30 - 2 (665151- ) .............................................................. 25 - 20

D10 BRACKET, HYDRAULIC LINES D1 CROSS AUGER DRIVES (SIDEHILL)

(655151- ) .............................................................. 30 - 3 (PICKUP PLATFORM)(645301-655300) ...................... 25 - 24

D14 BRACKET, HYDRAULIC MOTOR

( -655150) .............................................................. 30 - 8

D16 BRACKET, HYDRAULIC MOTOR D

(655151- ) .............................................................. 30 - 10

C14 BRACKETS, ADJUSTMENT, AUGER E7 DECALS ............................................................................ 40 - 2

( -655150) .............................................................. 25 - 12 B21 DIAL-A-MATIC BEARINGS

C15 BRACKETS, ADJUSTMENT, AUGER ( -655150) .............................................................. 20 - 12

(655151- ) .............................................................. 25 - 13 B22 DIAL-A-MATIC BEARINGS

(655151- ) ............................................................ 20 - 13

B21 DIAL-A-MATIC BRACKETS

( -655150) .............................................................. 20 - 12

B22 DIAL-A-MATIC BRACKETS

(655151- ) ............................................................ 20 - 13

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 5-5

- 8

PN=5

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

B11 DIAL-A-MATIC SENSING BOX B1 FLAP, STRIPPER

( -655150) .............................................................. 20 - 1 ( -655151) .............................................................. 15 - 5

B12 DIAL-A-MATIC SENSING BOX A24 FLAP, STRIPPER

(655151- ) .............................................................. 20 - 2 (655151- ) .............................................................. 15 - 3

B21 DIAL-A-MATIC SHAFT C4 FLIGHT EXTENSIONS

( -655150) .............................................................. 20 - 12 ( -655300) .............................................................. 25 - 1

B22 DIAL-A-MATIC SHAFT C5 FLIGHT, AUGER, EXTENSIONS

(655151- ) ............................................................ 20 - 13 (655151- ) .............................................................. 25 - 2

B13 DIAL-A-MATIC WIRING HARNESS C6 FLIGHT, WINDROW SPREADER

( -655150) .............................................................. 20 - 4 ( -655150) .............................................................. 25 - 3

B15 DIAL-A-MATIC WIRING HARNESS C7 FLIGHT, WINDROW SPREADER

(655151- ) .............................................................. 20 - 6 (655151- ) .............................................................. 25 - 4

B13 DIAL-A-MATIC, HEADER HEIGHT CONTROL A18 FRAME, IDLER ROLLERS

( -655150) .............................................................. 20 - 4 ( -655150) .............................................................. 10 - 7

B15 DIAL-A-MATIC, HEADER HEIGHT CONTROL A19 FRAME, IDLER ROLLERS

(655151- ) .............................................................. 20 - 6 (655151- ) .............................................................. 10 - 8

B13 DIAL-A-SPEED CONTROL B3 FRAME, MAIN AND RUNNERS

( -655150) .............................................................. 20 - 4 ( -655150) .............................................................. 15 - 8

B15 DIAL-A-SPEED CONTROL B5 FRAME, MAIN AND RUNNERS

(655151- ) .............................................................. 20 - 6 (655151- ) .............................................................. 15 - 10

E6 DRIVE CHAIN ON RIGHT-HAND SIDE .......................... 40 - 1

D13 DRIVE MOTOR, HYDRAULIC

( -625900) .............................................................. 30 - 6 G

D6 DRIVE SHAFT, HEADER-SIDEHILL

(615251-640500) .......................................................... 25 - 29 A12 GAUGE WHEELS

D5 DRIVE SHAFT, MAIN ( -655150) .............................................................. 10 - 1

(645251- ) .............................................................. 25 - 28 A13 GAUGE WHEELS

A18 DRIVE, CENTER (655151- ) .............................................................. 10 - 2

( -655150) .............................................................. 10 - 7 B7 GRAIN SLIDE

A19 DRIVE, CENTER ( -655150) .............................................................. 15 - 12

(655151- ) .............................................................. 10 - 8 B8 GRAIN SLIDE

C16 DRIVE, CROSS AUGER (655151- ) ............................................................ 15 - 13

( -635100) .............................................................. 25 - 14 C6 GUSSETT, WINDROW SPREADER

C18 DRIVE, CROSS AUGER ( -655150) .............................................................. 25 - 3

(635101-655150) .......................................................... 25 - 16 C7 GUSSETT, WINDROW SPREADER

C20 DRIVE, CROSS AUGER (655151- ) .............................................................. 25 - 4

(655151-665150) .......................................................... 25 - 18

C24 DRIVE, CROSS AUGER (SIDEHILL)

(PICKUP PLATFORM)(615251-640500) ...................... 25 - 22 H

D1 DRIVE, CROSS AUGER (SIDEHILL)

(PICKUP PLATFORM)(645301-655300) ...................... 25 - 24 D6 HEADER DRIVE SHAFT-SIDEHILL

D3 DRIVE, CROSS AUGER (SIDEHILL) (615251-640500) .......................................................... 25 - 29

(PICKUP PLATFORM)(655301- ) .......................... 25 - 26 B21 HEADER HEIGHT CONTROL BEARING

C22 DRIVE, CROSS AUGER, 14’ BPU ( -655150) .............................................................. 20 - 12

(665151- ) .............................................................. 25 - 20 B22 HEADER HEIGHT CONTROL BEARING

(655151- ) ............................................................ 20 - 13

B21 HEADER HEIGHT CONTROL BRACKETS

E ( -655150) .............................................................. 20

B22 HEADER HEIGHT CONTROL BRACKETS

C4 EXTENSIONS, FLIGHT (655151- ) ............................................................ 20 - 13

( -655300) .............................................................. 25 - 1 B21 HEADER HEIGHT CONTROL SHAFT

C5 EXTENSIONS, FLIGHT, AUGER ( -655150) .............................................................. 20 - 12

(655151- ) .............................................................. 25 - 2 B22 HEADER HEIGHT CONTROL SHAFT

(655151- ) ............................................................ 20 - 13

B13 HEADER HEIGHT CONTROL WIRING HARNESS

F ( -655150) .............................................................. 20

B15 HEADER HEIGHT CONTROL WIRING HARNESS

C12 FINGERS, AUGER (655151- ) .................................. 25 - 10 (655151- ) .............................................................. 20 - 6

A14 FINGERS, HOLD-DOWN A14 HOLD-DOWN FINGERS

( -655150) .............................................................. 10 - 3 ( -655150) .............................................................. 10 - 3

A15 FINGERS, HOLD-DOWN A15 HOLD-DOWN FINGERS

(655150- ) .............................................................. 10 - 4 (655151- ) .............................................................. 10 - 4

A23 FLAP, STRIPPER D22 HOSE AND COUPLER CONVERSION

( -655150) .............................................................. 15 - 2 (600001-622500) .......................................................... 30 - 16

A25 FLAP, STRIPPER D11 HOSES, HYDRAULIC

( -655150) .............................................................. 15 - 4 ( -655150) ................................................................ 30 - 4

- 12

- 4

5-6 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=6

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

D12 HOSES, HYDRAULIC M

(655151- ) .............................................................. 30 - 5

A20 HOUSINGS, BEARINGS, IDLER DRIVE ROLLER D5 MAIN DRIVE SHAFT

( -655150) .............................................................. 10 - 10 (645251- ) .............................................................. 25 - 28

A21 HOUSINGS, BEARINGS, IDLER DRIVE ROLLER B3 MAIN FRAME AND RUNNERS

(655151- ) .............................................................. 10 - 11 ( -655150) .............................................................. 15 - 8

C12 HUB, AUGER B5 MAIN FRAME AND RUNNERS

(655151- ) .............................................................. 25 - 10 (655151- ) .............................................................. 15 - 10

D13 HYDRAULIC DRIVE MOTOR B23 MARKER LIGHTS

( -625900) .............................................................. 30 - 6 ( -655150) ............................................................ 20 - 14

D9 HYDRAULIC LINES AND BRACKET B24 MARKER LIGHTS

( -655150) .............................................................. 30 - 2 (655151- ) .............................................................. 20 - 15

D10 HYDRAULIC LINES AND BRACKET D7 METRIC KEY STOCK KIT ................................................ 25 - 30

(655151- ) .............................................................. 30 - 3 D14 MOTOR, COUPLER

D11 HYDRAULIC LINES AND HOSES ( -655150) .............................................................. 30 - 8

( -655150) ................................................................ 30 - 4 D16 MOTOR, COUPLER

D12 HYDRAULIC LINES AND HOSES (655151- ) .............................................................. 30 - 10

(655151- ) .............................................................. 30 - 5 D13 MOTOR, DRIVE, HYDRAULIC

D14 HYDRAULIC MOTOR COUPLER ( -625900) .............................................................. 30 - 6

( -655150) .............................................................. 30 - 8 D18 MOTOR, HYD., HYDROSTATIC DRIVE REEL

D16 HYDRAULIC MOTOR COUPLER ( -655290) (ROSS) ................................................ 30 - 12

(655151- ) .............................................................. 30 - 10 D14 MOTOR, MOUNTING BRACKET

D14 HYDRAULIC MOTOR MOUNTING BRACKET ( -655150) .............................................................. 30 - 8

( -655150) .............................................................. 30 - 8 D16 MOTOR, MOUNTING BRACKET

D16 HYDRAULIC MOTOR MOUNTING BRACKET (655151- ) .............................................................. 30 - 10

(655151- ) .............................................................. 30 - 10 D20 MOTOR, REEL (EATON)

D18 HYDRAULIC MOTOR, HYDROSTATIC DRIVE REEL (655291- ) .............................................................. 30 - 14

( -655290) (ROSS) ................................................ 30 - 12 B2 MOUNTING SUPPORTS .................................................. 15 - 7

D18 HYDROSTATIC DRIVE REEL HYDRAULIC MOTOR

( -655290) .............................................................. 30 - 12

I D18 REEL MOTOR

( -655290) (ROSS) ................................................ 30 - 12

A18 IDLER ROLLERS D20 REEL MOTOR (EATON)

( -655150) .............................................................. 10 - 7 (655291- ) .............................................................. 30 - 14

A19 IDLER ROLLERS A14 RETAINER, HOLD-DOWN FINGERS

(655151- ) .............................................................. 10 - 8 ( -655150) .............................................................. 10 - 3

A15 RETAINER, HOLD-DOWN FINGERS

(655150- ) .............................................................. 10 - 4

K A18 ROLLERS, IDLER

( -655150) .............................................................. 10 - 7

D7 KEY STOCK, METRIC KIT .............................................. 25 - 30 A19 ROLLERS, IDLER

D7 KIT, METRIC KEY STOCK .............................................. 25 - 30 (655151- ) .............................................................. 10 - 8

B3 RUNNERS AND MAIN FRAME

( -655150) .............................................................. 15 - 8

L B5 RUNNERS AND MAIN FRAME

(655151- ) .............................................................. 15 - 10

B23 LIGHTS, MARKER

( -655150) ............................................................ 20 - 14

B24 LIGHTS, MARKER S

(655151- ) .............................................................. 20 - 15

B25 LIGHTS, STUBBLE B11 SENSING BOX MOUNTING, DIAL-A-MATIC

( -655150) .............................................................. 20 - 16 ( -655150) .............................................................. 20 - 1

C1 LIGHTS, STUBBLE B12 SENSING BOX MOUNTING, DIAL-A-MATIC

(655151- ) .............................................................. 20 - 17 (655151- ) .............................................................. 20 - 2

D9 LINES, HYDRAULIC B11 SENSING BOX, DIAL-A-MATIC

( -655150) .............................................................. 30 - 2 ( -655150) .............................................................. 20 - 1

D11 LINES, HYDRAULIC B12 SENSING BOX, DIAL-A-MATIC

( -655150) ................................................................ 30 - 4 (655151- ) .............................................................. 20 - 2

D10 LINES, HYDRAULIC C12 SHAFT AND AUGER

(655151- ) .............................................................. 30 - 3 (655151- ) .............................................................. 25 - 10

D12 LINES, HYDRAULIC C16 SHAFT, CROSS AUGER DRIVE

(655151- ) .............................................................. 30 - 5 ( -635100) .............................................................. 25 - 14

C18 SHAFT, CROSS AUGER DRIVE

(635101-655150) .......................................................... 25 - 16

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 5-7

PN=7

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

C20 SHAFT, CROSS AUGER DRIVE A24 STRIPPER

(655151-665150) .......................................................... 25 - 18 (655151- ) .............................................................. 15 - 3

C22 SHAFT, CROSS AUGER DRIVE, 14’ BPU A23 STRIPPER FLAP

(665151- ) .............................................................. 25 - 20 ( -655150) .............................................................. 15 - 2

D6 SHAFT, HEADER DRIVE-SIDEHILL A25 STRIPPER FLAP

(615251-640500) .......................................................... 25 - 29 ( -655150) .............................................................. 15 - 4

D5 SHAFT, MAIN DRIVE B1 STRIPPER FLAP

(645251- ) ................................................................ 25 - 28 ( -655151) .............................................................. 15 - 5

B7 SHEET, BOTTOM A24 STRIPPER FLAP

( -655150) .............................................................. 15 - 12 (655151- ) .............................................................. 15 - 3

B8 SHEET, BOTTOM B25 STUBBLE LIGHTS

(655151- ) ............................................................ 15 - 13 ( -655150) .............................................................. 20 - 16

B7 SHEETS, BACK C1 STUBBLE LIGHTS

( -655150) .............................................................. 15 - 12 (655151- ) .............................................................. 20 - 17

B8 SHEETS, BACK A12 SUPPORT, YOKE

(655151- ) ............................................................ 15 - 13 ( -655150) .............................................................. 10 - 1

E2 SHIELD A13 SUPPORT, YOKE

( -635100) .............................................................. 35 - 2 (655151- ) .............................................................. 10 - 2

E3 SHIELD

(635101-655150) .......................................................... 35 - 3

E4 SHIELD T

(655151- ) .............................................................. 35 - 4

C16 SHIELD, CROSS AUGER DRIVE E6 TIGHTENERS AND SPROCKETS ON R.H. SIDE .......... 40 - 1

( -635100) .............................................................. 25 - 14

C18 SHIELD, CROSS AUGER DRIVE

(635101-655150) .......................................................... 25 - 16 W

C20 SHIELD, CROSS AUGER DRIVE

(655151-665150) .......................................................... 25 - 18 D6 WALTERSCHIED HEADER DRIVE SHAFT, S.H.

C22 SHIELD, CROSS AUGER DRIVE, 14’ BPU (615251-640500) .......................................................... 25 - 29

(665151- ) .............................................................. 25 - 20 A12 WHEEL YOKE

A16 SHIELDS, PICKUP ( -655150) .............................................................. 10 - 1

( -655150) .............................................................. 10 - 5 A13 WHEEL YOKE

A17 SHIELDS, PICKUP (655151- ) .............................................................. 10 - 2

(655151- ) .............................................................. 10 - 6 A12 WHEELS, GAUGE

D6 SIDEHILL-HEADER DRIVE SHAFT ( -655150) .............................................................. 10 - 1

(615251-640500) .......................................................... 25 - 29 A13 WHEELS, GAUGE

B17 SPEED, AUTO BELT (655151- ) .............................................................. 10 - 2

( -655150) .............................................................. 20 - 8 C6 WINDROW SPREADER FLIGHT

B19 SPEED, AUTO BELT ( -655150) .............................................................. 25 - 3

(655151- ) .............................................................. 20 - 10 C7 WINDROW SPREADER FLIGHT

C8 SPROCKET AND CROSS AUGER (655151- ) .............................................................. 25 - 4

( -635100) .............................................................. 25 - 6 B13 WIRING HARNESS, HEADER HEIGHT CONTROL

C10 SPROCKET AND CROSS AUGER ( -655150) .............................................................. 20 - 4

(635101-655150) .......................................................... 25 - 8 B15 WIRING HARNESS, HEADER HEIGHT CONTROL

E6 SPROCKETS AND TIGHTENERS ON R.H. SIDE .......... 40 - 1 (655151- ) .............................................................. 20 - 6

C16 SPROCKETS, CROSS AUGER DRIVE

( -635100) .............................................................. 25 - 14

C18 SPROCKETS, CROSS AUGER DRIVE Y

(635101-655150) .......................................................... 25 - 16

C20 SPROCKETS, CROSS AUGER DRIVE A12 YOKE SUPPORT

(655151-665150) .......................................................... 25 - 18 ( -655150) .............................................................. 10 - 1

C22 SPROCKETS, CROSS AUGER DRIVE, 14’ BPU A13 YOKE SUPPORT

(665151- ) .............................................................. 25 - 20 (655151- ) .............................................................. 10 - 2

A20 SPROCKETS,CENTER AND IDLER ROLLERS DRIVE

( -655150) .............................................................. 10 - 10

A21 SPROCKETS,CENTER AND IDLER ROLLERS DRIVE

(655151- ) .............................................................. 10 - 11

A23 STRIPPER

( -655150) .............................................................. 15 - 2

A25 STRIPPER

( -655150) .............................................................. 15 - 4

B7 STRIPPER

( -655150) .............................................................. 15 - 12

B1 STRIPPER

( -655151) .............................................................. 15 - 5

B8 STRIPPER

(655151- ) ............................................................ 15 - 13

5-8 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=8

GAUGE WHEELS (R.H. ILLUSTRATED) ( -655105)

HP5557 -UN-01JAN94

A12

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 AH116955 ARM 1 -640100 R.H. AH132562 SUPPORT 1 640101- R.H. AH116956 ARM 1 -640100 L.H. AH132563 SUPPORT 1 640101- L.H. 2 03H1731 BOLT 8 1/2" X 1-1/2" E54809 LOCK NUT 8 12.700 MM (1/2") 3 03H1709 BOLT 4 5/16" X 1" N10213 LOCK NUT 4 7.925 MM (5/16") 4 19H1792 CAP SCREW 2 -640100 1/2" X 1" 19M7788 SCREW 2 640101- M12 X 25 12H301 LOCK WASHER 2 -640100 1/2" 5 24H1347 WASHER 2 17/32" X 2" X 0.194" 6 24H1520 WASHER 4 1-15/32" X 2" X 0.105" 7 H111742 RING 6 8 JD7797 LUBRICATION FITTING 2 STRAIGHT, 1/4" 9 E32172 WASHER 8 38.100 X 57.150 X 6.350 MM (1-1/2" X 2-1/4" X 1/4") 10 AH102883 YOKE 2 -640100 AH133711 YOKE 2 640101- 11 JD7829 LUBRICATION FITTING 2 STRAIGHT, 5/16" 12 AG903E WHEEL 2 -640100 (USE 20 X 10.00 - 8 (4 PLY) TIRES) AH133712 WHEEL 2 640101- (USE 20 X 10.00 - 8 (4 PLY) TIRES) 13 E16421 SPACER 2 -640100 16.662 X 25.273 X 129.388 MM (21/32" X 0.995" X 5-3/32") H139004 PIN 2 640101- 14 G6891E CAP 4 15 08H3439 CAP SCREW 2 -640100 5/8" X 7-1/4" 19M7843 SCREW 4 640101- M16 X 35 12H294 LOCK WASHER 2 -640100 5/8" 14H760 NUT 2 -640100 5/8" 16 03H1659 BOLT 1 1/2" X 1" E54809 LOCK NUT 1 12.700 MM (1/2")

17 .................. TIRE 2

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (02-JUN-98) 10-1

PN=9

GAUGE WHEELS (R.H. ILLUSTRATED) (655151- )

HP8391 -UN-24MAR99

A13

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 AH132562 SUPPORT 1 R.H. AH132563 SUPPORT 1 L.H. 2 03M7200 BOLT 8 M12 X 40 14M7299 FLANGE NUT 8 M12 3 03M7185 BOLT 4 M8 X 25 14M7298 FLANGE NUT 4 M8 4 19M7788 SCREW 2 M12 X 25 5 24H1347 WASHER 2 17/32" X 2" X 0.194" 6 24H1520 WASHER 4 1-15/32" X 2" X 0.105" 7 H111742 RING 6 8 JD7797 LUBRICATION FITTING 2 STRAIGHT, 1/4" 9 E32172 WASHER 6 10 AH133711 YOKE 2 11 JD7829 LUBRICATION FITTING 2 STRAIGHT, 5/16" 12 AH133712 WHEEL 2 (USE 20 X 10.00 - 8 (4 PLY) TIRES) 13 H139004 PIN 2 14 G6891E CAP 4 15 19M7843 SCREW 2 M16 X 35 16 03M7197 BOLT 1 M12 X 25 14M7299 FLANGE NUT 1 M12

17 .................. TIRE 2 (4 PLY TIRE)

.................. TIRE 2 (6 PLY TIRE) (CIS COUNTRIES ONLY)

BH79209 (COMPLETE GOODS) BELT PICKUP FRAME 110"

10-2 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=10

HOLD-DOWN FINGERS AND SUPPORTS ( -655150)

HP5035 -UN-01JAN94

A14

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 34H105 SPRING PIN 2 1/4" X 1-1/2" 2 H78354 SCREW AR 7.938 X 14.224 MM (5/16" X 0.560") (110", 8 USED; 132", 9 USED; 154", 10 USED) 3 H87747 FINGER AR (110", 26 USED; 132", 31 USED; 154", 36 USED) 4 H107287 RETAINER 1 (110") H106260 RETAINER 1 (132") H106259 RETAINER 1 (154") 5 AH106171 TUBE 1 (110") AH98138 TUBE 1 (132") AH156408 TUBE 1 (SUB FOR AH98137) (154") 6 AH98135 ARM 1 -640100 (R.H.) AH132570 SUPPORT 1 640101- (R.H.) 7 24H1790 WASHER 8 -640100 17/32" X 1-1/2" X 0.164" 8 19H1721 CAP SCREW 4 -640100 1/2" X 1-1/2" T55636 BOLT 4 640101- 1/2" X 1-1/4" 12H301 LOCK WASHER 4 -640100 1/2" 14H809 NUT 4 1/2" 9 AH98136 ARM 1 -640100 (L.H.) AH132571 SUPPORT 1 640101- (L.H.) 10 AH132572 EXTENSION 2 640101- L H OR R H, TWO REQUIRED

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 10-3

PN=11

HOLD-DOWN FINGERS AND SUPPORTS (655151- )

HP5560 -UN-01JAN94

A15

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 34H105 SPRING PIN 2 1/4" X 1-1/2" 2 37M7083 SCREW AR M8 X 12 (110", 8 USED; 132", 9 USED; 154", 10 USED) 3 H87747 FINGER AR (110", 26 USED; 132", 31 USED; 154", 36 USED) 4 H107287 RETAINER 1 (110") H106260 RETAINER 1 (132") H106259 RETAINER 1 (154") 5 AH106171 TUBE 1 (110") AH98138 TUBE 1 (132") AH156408 TUBE 1 (SUB FOR AH98137) (154") 6 AH132570 SUPPORT 1 (R.H.) 7 AH132572 EXTENSION 2 L H OR R H, TWO REQUIRED 8 19M7789 SCREW 4 M12 X 30 14M7299 FLANGE NUT 4 M12 9 AH132571 SUPPORT 1 (L.H.) .. AH135954 EXTENSION 1 (INCLUDES AH132572, (4) 19M7789 AND (4) 14M7299)

BH71942 (COMPLETE GOODS) BPU 110"

10-4 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=12

PICKUP SHIELDS ( -655150)

HP5036 -UN-01JAN94

A16

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 AH92667 SHIELD 1 -640100 R.H. AH92668 SHIELD 1 -640100 L.H. 2 21H1024 SCREW 2 -640100 1/4" X 5/8" 3 AH76956 SHIELD 1 -640100 L.H. AH89342 SHIELD 1 -640100 R.H. 4 19H1227 CAP SCREW 6 -640100 1/4" X 1/2" 5 AH103737 SHIELD 1 -625900 L.H. (SUB AH124642) AH124642 SHIELD 1 -640100 AH111199 SHIELD 1 -640100 R.H. 6 24H1287 WASHER AR -640100 9/32" X 5/8" X 0.065" 7 21H1024 SCREW 18 -640100 1/4" X 5/8" N10217 LOCK NUT 18 -640100 1/4" 8 H76323 SHIELD 1 -640100 L.H. H76322 SHIELD 1 -640100 R.H. 9 03H1268 BOLT 4 -640100 5/16" X 3/4" N10213 LOCK NUT 4 -640100 5/16" 10 H76321 BRACKET 2 -640100 11 AH132566 WINDSHIELD 1 640101- AH132567 WINDSHIELD 1 640101- 12 21H1024 SCREW 10 640101- 1/4" X 5/8" N10217 LOCK NUT 10 640101- 6.350 MM (1/4") 13 21H1024 SCREW 2 640101- 1/4" X 5/8" N10217 LOCK NUT 2 640101- 6.350 MM (1/4")

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132"

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (26-APR-96) 10-5

PN=13

PICKUP SHIELDS (655151- )

HP5561 -UN-01JAN94

A17

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 AH132566 WINDSHIELD 1 R.H. AH132567 WINDSHIELD 1 L.H. 2 19M7775 SCREW 12 M6 X 16 14M7397 LOCK NUT 12 M6

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132"

10-6 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99)

PN=14

DRIVE, CENTER, AND IDLER ROLLERS ( -655150)

HP1334 -UN-01JAN94

A18

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 26H40 SHAFT KEY 3 1/4" X 2-1/8" 2 AH124540 ROLLER 1 -640100 (110") AH135590 ROLLER 1 640101- (110") AH124539 ROLLER 1 -640100 (132") AH135591 ROLLER 1 640101- (132") AH124538 ROLLER 1 -640100 (154") AH135592 ROLLER 1 640101- (154") 3 AH111517 ROLLER 1 (110") AH111516 ROLLER 1 (132") AH111515 ROLLER 1 (154") 4 03H1709 BOLT 4 5/16" X 1" N10213 LOCK NUT 4 7.925 MM (5/16") 5 H102766 PAD 1 -625900 (NO LONGER AVAILABLE) 6 AH103056 TUBE 1 -625900 (110") AH129268 TUBE 1 (110") AH103055 TUBE 1 -625900 (132") AH129269 TUBE 1 (132") AH103057 TUBE 1 -625900 (154") AH129270 TUBE 1 (154") 7 03H1731 BOLT 8 1/2" X 1-1/2" E54809 LOCK NUT 8 12.700 MM (1/2") 8 AH111171 PLATE 1 -640100 L.H. AH132565 SHEET 1 640101- 9 AH111173 REINFORCEMENT 1 L.H. (SUB AH142752 AND (3) 19M7784) 10 14H809 NUT 4 1/2" 11 19H2062 CAP SCREW 2 1/2" X 4" 12 AH127886 ROLLER 1 -640100 (110") AH135596 ROLLER 1 640101- (110") AH127885 ROLLER 1 -640100 (132") AH135597 ROLLER 1 640101- (132") AH127882 ROLLER 1 -640100 (154") AH135598 ROLLER 1 640101- (154") 13 AH111170 PLATE 1 -640100 R.H. AH132564 SHEET 1 640101- 14 AH111172 REINFORCEMENT 1 (SUB AH142753 AND (3) 19M7784) R.H.

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132"

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (26-APR-96) 10-7

PN=15

DRIVE, CENTER, AND IDLER ROLLERS (655151- )

HP5563 -UN-01JAN94

A19

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 26H40 SHAFT KEY 3 1/4" X 2-1/8" 2 AH135590 ROLLER 1 (110") AH135591 ROLLER 1 (132") AH135592 ROLLER 1 (154") 3 AH111517 ROLLER 1 (110") AH111516 ROLLER 1 (132") AH111515 ROLLER 1 (154") 4 03M7186 BOLT 4 M8 X 30 14M7298 FLANGE NUT 4 M8 5 AH156994 REINFORCEMENT 1 (SUB FOR AH142753) L.H. 6 AH129268 TUBE 1 (110") AH129269 TUBE 1 (132") AH129270 TUBE 1 (154") 7 03M7200 BOLT 8 M12 X 40 14M7299 FLANGE NUT 8 M12 8 AH156993 SHEET 1 L.H. (SUB FOR AH132565) 9 AH156995 REINFORCEMENT 1 L.H. (SUB FOR AH142752) 10 14M7415 NUT 4 -655261 M12 14H809 NUT 4 655262- 12.700 MM (1/2") 11 19M7590 CAP SCREW 2 -655261 M12 X 100 19H2062 CAP SCREW 2 655262- 12.700 X 101.600 MM (1/2" X 4") 12 AH135596 ROLLER 1 (110") AH135597 ROLLER 1 (132") AH135598 ROLLER 1 (154") 13 AH156992 SHEET 1 R.H. (SUB FOR AH132564)

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132"

10-8 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=16

MEMORANDA

ROLLERS AND SUPPORTS

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-OCT-96) 10-9

PN=17

A20

SPROCKETS AND BEARINGS FOR DRIVE, CENTER, AND IDLER ROLLERS ( -655150)

HP8876 -UN-29JUL99

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19H1936 CAP SCREW 6 3/8" X 3/4" 12H304 LOCK WASHER 6 3/8" 2 AN50685 PRESSED FLANGED HOUSING 2 WITH GREASE FITTING 3 N52234 PRESSED FLANGED HOUSING 2 4 22H897 SET SCREW 6 1/4" X 1/4" 5 JD8594 ECCENTRIC LOCKING COLLAR 6 6 JD9397 BALL BEARING 6 7 24H1219 WASHER 4 7/16" X 1" X 0.083" (110" AND 132") 24H1341 WASHER 8 17/32" X 15/16" X 0.060", (154") 8 H101594 HOUSING 2 9 JD7788 LUBRICATION FITTING 2 10 H118364 CLIP 2 11 09H1611 BOLT 4 7/16" X 1-3/4" (110" AND 132") 14H813 NUT 8 7/16" (110" AND 132") H95783 SCREW 4 -675307 12.700 X 44.450 MM (1/2" X 1-3/4") (154") H168232 SCREW 4 675308- (14’) 14H809 NUT 8 1/2", (154") 12 03H2020 BOLT 4 3/8" X 2" N10215 LOCK NUT 4 9.525 MM (3/8") 13 H101596 COUPLING 1 14 19H1801 CAP SCREW 2 -635100 3/8" X 2" 19H1765 CAP SCREW 2 3/8" X 1-3/4" 12H304 LOCK WASHER 2 3/8" 15 H102699 HOUSING 2

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132" BH79870 (COMPLETE GOODS) BPU 14’

10-10 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00)

PN=18

A21

SPROCKETS AND BEARINGS FOR DRIVE, CENTER, AND IDLER ROLLERS (655151- )

HP8876 -UN-29JUL99

ROLLERS AND SUPPORTS

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19M7784 SCREW 6 M10 X 20 12H304 LOCK WASHER 6 3/8" 2 H135410 PRESSED FLANGED HOUSING 2 WITH GREASE FITTING 3 AH129420 PRESSED FLANGED HOUSING 2 4 22H897 SET SCREW 6 1/4" X 1/4" 5 JD8594 ECCENTRIC LOCKING COLLAR 6 6 JD9397 BALL BEARING 6 7 24H1219 WASHER 4 7/16" X 1" X 0.083" (110" AND 132") 24H1341 WASHER 8 17/32" X 15/16" X 0.060", (154") 8 H101594 HOUSING 2 9 JD7788 LUBRICATION FITTING 2 10 H118364 CLIP 2 11 09H1611 BOLT 4 7/16" X 1-3/4" (110" AND 132") 14H813 NUT 8 7/16" (110" AND 132") H95783 SCREW 4 12.700 X 44.450 MM (1/2" X 1-3/4") (154") 14H809 NUT 8 1/2", (154") 12 03M7196 BOLT 4 M10 X 50 14M7298 FLANGE NUT 4 M8 13 H101596 COUPLING 1 14 19H1765 CAP SCREW 2 3/8" X 1-3/4" 12H304 LOCK WASHER 2 3/8" 15 H102699 HOUSING 2

BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132"

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99) 10-11

PN=19

MEMORANDA

ROLLERS AND SUPPORTS

10-12 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-OCT-96)

PN=20

MEMORANDA

FRAME, STRIPPERS AND PLATES

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-OCT-96) 15-1

PN=21

STRIPPER (110" AND 132" BELT PICKUP) ( -655150)

HP5564 -UN-01JAN94

A23

FRAME, STRIPPERS AND PLATES

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19H2333 CAP SCREW AR 1/4" X 2-1/4" 2 24H1288 WASHER AR 9/32" X 1" X 1/16" 3 H85487 FLAP 2 (110") H85488 FLAP 2 (132") 4 AH108453 STRIPPER 1 (110") AH108452 STRIPPER 1 (132") 5 H109817 SUPPORT 2 -625900 (110") (SUB H137638) H137638 SUPPORT 2 (110") H109816 SUPPORT 2 -625900 (SUB H137639) (132") H137639 SUPPORT 2 (132") 6 19H1731 CAP SCREW 2 3/8" X 1" N10215 LOCK NUT 2 9.525 MM (3/8") 7 12H302 LOCK WASHER AR 1/4" 8 14H786 NUT AR 1/4" 9 H89476 NUT AR 6.350 MM (1/4") (SUB M80082) M80082 NUT AR 6.350 MM (1/4") 10 24H1287 WASHER 1 9/32" X 5/8" X 0.065" 11 03H1540 BOLT 1 5/16" X 3/4" N10213 LOCK NUT 1 5/16"

BH78739 (COMPLETE GOODS) STRIPPER ASSY - 132" BPU

15-2 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-SEP-98)

PN=22

STRIPPER (110" AND 132" BELT PICKUP) (655151- )

HP5564 -UN-01JAN94

A24

FRAME, STRIPPERS AND PLATES

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19M8040 SCREW AR M6 X 60 2 24H1288 WASHER AR 9/32" X 1" X 1/16" 3 H85487 FLAP 2 (110") H85488 FLAP 2 (132") 4 AH108453 STRIPPER 1 (110") AH108452 STRIPPER 1 (132") 5 H137638 SUPPORT 2 (110") H137639 SUPPORT 2 (132") 6 19M7785 SCREW 2 M10 X 25 14M7296 FLANGE NUT 2 M10 7 12H302 LOCK WASHER AR 1/4" 8 14M7397 LOCK NUT AR M6 9 H89476 NUT AR 6.350 MM (1/4") 10 24H1287 WASHER 1 9/32" X 5/8" X 0.065" 11 03M7184 BOLT 1 M8 X 20 14M7298 FLANGE NUT 1 M8

BH78738 (COMPLETE GOODS) STRIPPER 110" BH71991 (COMPLETE GOODS) PU ATTACHMENT PARTS BH78739 (COMPLETE GOODS) STRIPPER ASSY - 132" BPU

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99) 15-3

PN=23

STRIPPER (154" BELT PICKUP) ( -655150)

HP3591 -UN-01JAN94

A25

FRAME, STRIPPERS AND PLATES

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19H1849 CAP SCREW 15 5/16" X 1-1/4" 2 H99752 REINFORCEMENT 1 -640100 3 H99751 FLAP 2 4 AH103698 BAR 1 -640100 AH133679 BAR 1 640101- 5 19H1731 CAP SCREW 2 3/8" X 1" N10215 LOCK NUT 2 9.525 MM (3/8") 6 M63904 NUT 15 7.925 MM (5/16") 7 T16464 LOCK NUT 15 7.925 MM (5/16") 8 H99753 SUPPORT 1 -625900 H137640 SUPPORT 1 -640100 H138953 SUPPORT 1 640101- 9 03H1540 BOLT 2 5/16" X 3/4" N10213 LOCK NUT 2 5/16"

15-4 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (26-APR-96)

PN=24

STRIPPER (154" BELT PICKUP) (655151- )

HP5565 -UN-01JAN94

FRAME, STRIPPERS AND PLATES

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 19M7868 SCREW 15 -655261 M8 X 30 19M8291 SCREW 15 655262- M8 X 35 2 H162036 FLAP 2 (SUB FOR (2) H99751) 3 AH133679 BAR 1 4 19M7785 SCREW 2 M10 X 25 14M7296 FLANGE NUT 2 M10 5 M63904 NUT 15 -655261 7.925 MM (5/16") M84309 NUT 15 655262- 7.925 MM (5/16") 6 14M7396 LOCK NUT 15 M8 7 H138953 SUPPORT 1 8 03M7184 BOLT 2 M8 X 20 14M7298 FLANGE NUT 2 M8

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 15-5

PN=25

MEMORANDA

FRAME, STRIPPERS AND PLATES

15-6 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-OCT-96)

PN=26

BELTS AND PLASTIC FINGERS

HP869 -UN-01JAN94

FRAME, STRIPPERS AND PLATES

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 P50195 PIN AR -665100 (110",-5 USED; 132"-6 USED; 154" - 7 USED) H154675 PIN AR 665101- (110" -5 USED; 132" -6 USED; 154" -7 USED) 2 AH147908 BELT AR (SUB FOR (AR) AH92200) (110",-5 USED; 132"-6 USED; 154"-7 USED) 3 AH86897 BOLT AR (110",-300 USED; 132",-360 USED; AND 154",-420 USED) (10 PER CARTON) 4 H86248 FINGER AR (110",-300 USED; 132"-360 USED; AND 154"-420 USED) 5 AH147909 BELT AR (SUB FOR (AR) AH93943) (110",-5 USED 132"- 6 USED; AND 154"-7 USED)(7 USED - UKRAINE PLATFORMS)

BH76527 (COMPLETE GOODS) BELT ASSEMBLY - PU PLASTIC FINGERS BH71942 (COMPLETE GOODS) BPU 110" BH71943 (COMPLETE GOODS) BPU 132" BH76528 (COMPLETE GOODS) BELT ASSEMBLY - PU PLASTIC FINGERS

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (30-MAY-00) 15-7

PN=27

FRAME AND RUNNERS ( -655150)

HP5043 -UN-01JAN94

FRAME, STRIPPERS AND PLATES

15-8 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (26-APR-96)

THIS PARTS LISTING IS CONTINUED

PN=28

FRAME, STRIPPERS AND PLATES

FRAME AND RUNNERS - CONTINUED ( -655150)

KEY PART NO. PART NAME QTY SERIAL NO. REMARKS

1 AH121197 FRAME 1 -625900 (912) (SUB AH132259, H136751, H137643, (2) H137143 AND (4) 19M7784) AH132259 FRAME 1 -635100 (912) (SUB AH133912, AH129286, AH134121, H136062, M48770, A22698 AND (2) M72598) AH133912 FRAME 1 635101-640100 (912) (SUB AH136219) AH136219 FRAME 1 640101- (912) AH121198 FRAME 1 -625900 (914) (SUB AH133914, AH129286, AH134121, H136062, M48770, A22698 AND (2) M72598) AH133914 FRAME 1 635101-640100 (914) AH136220 MAIN FRAME 1 640101- (914) 2 AA21292 QUICK LOCK PIN 4 3 H148930 PIN 2 4 AH89376 TUBE 2 (110" AND 132") (SUB AH143603) 5 19H1868 CAP SCREW 2 1/2" X 3-3/4" E54809 LOCK NUT 2 12.700 MM (1/2") (110" AND 132") 6 19H1731 CAP SCREW 2 3/8" X 1" N10215 LOCK NUT 2 9.525 MM (3/8") 7 AH89382 RUNNER 1 (110" AND 132") 8 19H1854 CAP SCREW 4 3/8" X 3-3/4" N10215 LOCK NUT 1 9.525 MM (3/8") 9 AH113221 SUPPORT 1 R.H. (110" AND 132") AH111174 SUPPORT 1 -655309 R.H. (154") AH113222 SUPPORT 1 L.H. (110" AND 132") AH111175 SUPPORT 1 -655309 L.H. (154") 10 19H3214 CAP SCREW 2 5/8" X 3" 14H821 NUT 4 5/8" 11 H112896 SHIELD 1 12 H65108 SCREW 2 7.938 X 12.700 MM (5/16" X 1/2") 13A 03H1629 BOLT 6 -625900 5/8" X 2-1/4" 12H294 LOCK WASHER 6 -625900 5/8" 14H760 NUT 6 -625900 5/8" 13B 19M7784 SCREW 4 M10 X 20 14A H133619 BRACKET 1 -625900 R.H. H133620 BRACKET 1 -625900 L.H. 14B H137143 PLATE 1 15 H124261 SPACER 6 -625900 16.280 X 31.750 X 16.500 MM (0.641" X 1-1/4" X 0.650")

16 .................. REINFORCEMENT 1

17 .................. PLATE 1

18 H136751 DECAL 1 (INSTALLED ON L.H. SIDE OF BACKSHEET ONLY) 19 AH132905 PIN 1 R.H. (LATCH PIN ASSY) AH132906 PIN 1 L.H. (LATCH PIN ASSY) 20 H134219 STRIPPER 1 L H H134218 STRIPPER 1 R H

BH79048 (COMPLETE GOODS) TUBE AND RUNNER ASSEMBLY BH71991 (COMPLETE GOODS) PU ATTACHMENT PARTS

PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (26-APR-96) 15-9

PN=29

FRAME AND RUNNERS (655151- )

HP5566 -UN-01JAN94

FRAME, STRIPPERS AND PLATES

15-10 PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM - 900 SERIES PC2210 (01-SEP-99)

THIS PARTS LISTING IS CONTINUED

PN=30

+ 84 hidden pages