JML uber scoot S300 User Manual
USER
MANUAL
300
NOTE: Product images are for demonstration purposes only and may not reect exact appearance of actual product.
Specications subject to change without notice.
READ AND UNDERSTAND THE
ENTIRE MANUAL BEFORE RIDING
SUITABLE FOR AGES 13+
1.
IMPORTANT
BATTERY CARE AND MAINTENANCE
1. Make sure that your UBER SCOOT S300 is fully charged prior to initial use. The rst charge will take 12 hours. Wait for the
full 12 hour charge period before unplugging.
2. Always charge your UBER SCOOT S300 after every use.
3. DO NOT leave your UBER SCOOT S300 charging for more than 5 hours (except for rst 12 hour charge).
4. Should you wish to store your UBER SCOOT S300, charge it beforehand and make sure to charge once every 14 days.
5. Only inate the tires to max 60 psi.
6. Do NOT store in freezing or below freezing temperatures. Freezing temperatures will permanently damage the battery.
This manual contains vital information regarding product care as well as best riding practices, riding conditions, and
precautionary measures. Read through this entire manual before riding, and make sure to heed all warnings. Failure
to do so may result in your UBER SCOOT S300 not being covered by guarantee.
WARNINGS
The UBER SCOOT S300 is not intended to be used on public roads where there are cars, buses, taxis or any other licensed motor
vehicles. Make sure to familiarise yourself with the trac rules and regulations in your area to determine where it is safe for you
to ride your scooter. This is not a toy. Riding the UBER SCOOT S300 can result in serious injury or even death regardless of the
ability of the rider, any factory fault, any precautions taken or conditions in which they (the rider) were riding in. Make sure to
check that all nuts and bolts are tightly fastened before use, that your brakes are in proper working condition, and that you are
both able and competent to handle this scooter. Parents should be made aware that this scooter is not for children under the
age of 13, and further still, that riders above this age should show a suitable degree of awareness, skill and ability to handle a
ride-on of this nature. Assembly should be supervised by an adult. Do not exceed the weight limit of 100kg. The rider’s weight
does not necessarily mean that their size is appropriate to maintain control of the scooter. Do not touch the breaks or motor
when in use or directly after use as these parts may be hot. Keep away from small children. Recommended age is 13+. It is a
parent decision to allow his or her child to ride this product and this should be based on the child's maturity, skill and ability to
follow rules. Outdoor use only. Never risk damaging surfaces such as carpet or orring by using the product indoors.
RIDING CONDITIONS, METHOD AND APPROPRIATE APPAREL
Make sure to use personal, protective equipment in the form of elbow and knee pads as well as a helmet and appropriate
footwear. Gloves and goggles are recommended.
Riders will become accustomed to riding the UBER SCOOT S300 over time. Accidents can occur when given to someone who
has never ridden a scooter before. Exercise caution when allowing a rst-time rider to get onto the UBER SCOOT S300. The rider
should be instructed on how to ride the UBER SCOOT S300 (see full details on “HOW TO RIDE YOUR UBER SCOOT S300” below).
Use caution when riding, and make sure to always be aware of your surroundings so as to avoid any pedestrians, other riders,
animals or xed obstacles that may cause you, or you may cause, any injury. The UBER SCOOT S300 is not designed to
withstand any extreme manoeuvres. Do not attempt to perform any tricks, wheelies, bunny hops or any other extreme
manoeuvres on the UBER SCOOT S300. Evidence of such abuse will render your guarantee void.
Assess riding conditions before making use of the UBER SCOOT S300, and do not ride through any gravel, mud, water, sand or
on any o-road surface. Do not ride your UBER SCOOT S300 in the rain, or through any adverse weather conditions. The
electrical and drive components could be damaged by riding through the aforementioned elements or surfaces and will render
your guarantee void. Do not ride at night or when visibility is limited. Do not ride near steps or swimming pools.
HOW TO RIDE YOUR UBER SCOOT S300
The UBER SCOOT S300 has a variable-speed accelerator (throttle) like that found on a motorcycle. You can control your speed
precisely by slowly opening the throttle. Opening the throttle further will result in increased speed. Do not snap the throttle
open suddenly as this will rapidly project the scooter forward. This may result in you losing control of the UBER SCOOT S300
and can result in damage to property or cause you serious injury.
Before turningthe UBER SCOOT S300 on make sure that the scooter is aimed towards an open space with nothing in front of
you. Put one foot on the deck and hold the handlebars rmly. Familiarise yourself with the brakes before switching on your
UBER SCOOT S300. Hold the accelerator rmly and slowly twist it open. As the scooter starts to move forward and you have
enough speed to balance, place your second foot onto the deck. Slowly open the throttle until you get to the required speed
for the conditions in which you are riding, whilst maintaining a speed suitable for your ability. Build your speed up gradually as
you become familiar with the scooter. Practise using the brakes while you are going slowly. Avoid opening the throttle to its
maximum until you are well accustomed to the scooters handling and braking. Fully opening the throttle will result in your
batteries discharging rapidly, and your range will be adversely aected.
Place the
handlebar onto
the handle stem
Tighten the
handlebar knob
4 5
1
8
6
9
4
7
Front wheel
Installation requires adult supervision. To dismantle the scooter, ensure the power is o.
Ensure the power is o and not being ridden before making any adjustments.
Rear wheel
3
2
INSTALLING THE HANDLEBAR
Put down the foot stand
Open the scooter
fully so that the
fold mechanism
holes line up
Place the fold mechanism pin fully
into the hole and tighten the knob.
ATTENTION: Ensure the fold
mechanism pin is correctly inserted
and tightened before riding.
FAMILIARISING YOURSELF WITH YOUR UBER SCOOT S300
2.
1. Throttle
2. Handlebar tightening knob
3. Hand-operated rear brake
4. Handle stem
5. Brake caliper
6. 300W Motor
7. Foot stand
8. Fuse/Reset
9. On/O switch
10. Rechargeable 24V Battery
11. Fold mechanism
1 2
3
10
11
5
Loading...