JML Paint Sprayer Elite, Q1P-WYT10-800 Original Instructions Manual

SPRAYER

Original Instructions

PSE_Instruction Manual_A.indd 1 24/10/2011 13:33

SPRAYER

Thank you for purchasing the Paint
Sprayer Elite from JML. This improved
paint spraying system will help you
to enjoy fast, simple, superior painting
results on surfaces large and small,
with no drips or spills. The 360°
spray technology means that you
can spray in a horizontal or vertical
pattern, and there’s even a detailing
spray setting so you can paint in
every awkward nook, cranny and
corner. It’s never been easier to
achieve the perfect finish every time.

To make the best use of this
product and to use it safely, please
read these instructions thoroughly
and keep for future reference.

Safety Warnings & Advice

Components

Before Use - Preparation

Aligning the Suction Tube

Spray Pattern

Using Paint Sprayer Elite

After Use

Maintenance

Troubleshooting

Guarantee

3

8

9

10

11

12

13

16

17

18

2

Contents

PSE_Instruction Manual_A.indd 2-3 24/10/2011 13:33

Safety Warnings & Advice continuedSafety Warnings & Advice

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or a lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of this
appliance by a person responsible for
their safety.

This symbol indicates a
hazardous situation, which, if not
avoided, could result in death or
serious injury.

KEEP OUT OF REACH OF CHILDREN

The Paint Sprayer Elite is not designed
for, and should not be used to apply
any kind of self tanning solution ­failure to follow this warning could
result in serious injury.

HAZARD:
EXPLOSION OR FIRE

Solvent and paint fumes can explode or ignite.

Property damage and/or severe user injury
can occur.

PREVENTION

• PROVIDE plenty of ventilation in

the spray area at all times to ensure
no build-up of flammable vapours;
flammable vapours are often heavier
than air and can accumulate along the
floor or ground.

• KEEP your work area clean, well lit

and free of paint or solvent containers,
rags and other flammable materials ­spontaneous combustion may occur.

• AVOID all ignition sources

such as: static electric sparks,
open flames, pilot lights, other
electrical products and hot
objects, engines, cigarettes, sparks
from plugging and unplugging power
cords, and operating switches.

• Connecting or disconnecting power

cables or working light switches can
cause sparks.

• DO NOT SMOKE IN THE SPRAY

AREA!

• DO NOT clean the spray gun with

inflammable solvents.

• DO NOT USE materials with a

flashpoint below 70°F (21°C).
What is a flashpoint? The flashpoint
of a volatile material is the lowest
temperature at which it can vaporise to
form an ignitable mixture in air.

(consult coating supplier)

• ALWAYS follow material and

solvent manufacturer’s warnings and
instructions.

• PLASTIC CAN CAUSE SPARKS.

Never hang plastic to enclose a
spray area. DO NOT use plastic drop
clothes when spraying any flammable
materials.

• A fire extinguisher must be

present and in good working
order.

HAZARD: HAZARDOUS
VAPOURS

Paints, solvents, insecticides and other
materials can be harmful if inhaled or if they
come into contact with the body.

Vapours can cause severe nausea, fainting,
poisoning and death.

PREVENTION

• ALWAYS use a respirator or protective

mask when spraying.

• ALWAYS use eye and ear

protection when spraying.

• ALWAYS wear protective clothing.

HAZARD: ELECTRIC SHOCK

Can cause severe injury.

PREVENTION

• KEEP the electrical cable, plug

and spray gun trigger free from paint
and any other liquids.

• DO NOT abuse the power cord.

DO NOT use if the power cord is
damaged in anyway. NEVER use the
power cord for carrying, pulling or
unplugging the Paint Sprayer. KEEP
the cord away from heat, oil, sharp
edges and/or objects with moving
parts.

• DO NOT USE the Paint Sprayer if

the power switch does not turn it on
or off. Any power tool that cannot
be controlled by the power switch is
dangerous and must be repaired.

• ALWAYS switch off and disconnect

from the power supply before making
any adjustments to settings, changing
accessories or storing the Paint Sprayer.

• The Paint Sprayer Elite’s plug MUST

match the power outlet.
NEVER modify the plug in anyway.

• NEVER use adaptors with earthed

(grounded) power tools.

• AVOID body contact with earthed or

grounded surfaces, such as pipes,

radiators, cookers and refrigerators ­there is an increased risk of electrical
shock if your body is earthed or
grounded.

• DO NOT expose your Paint Sprayer

Elite to rain or wet conditions.

• WHEN operating the Paint Sprayer

outdoors, use an extension cord
suitable for outdoor use.

• IF operating the Paint Sprayer in a

damp environment is unavoidable,
use a residual current device (RCD)
protection system.

Failure to observe these
recommendations may result in an
electrical shock.

HAZARD: EXPLOSION

Explosion hazard due to
incompatible materials will
cause property damage and/or
severe user injury.

PREVENTION

• DO NOT USE materials containing

bleach or chlorine.

• DO NOT USE halogenated

hydrocarbon solvents such as bleach,
mildewcide, methylene chloride and 1,

1.1-trichloroethane if you are painting

aluminium.

Contact your coating supplier about the
compatibility of painting material with
aluminium.

• DO NOT use cleaning or thinning

solvents or lubricants containing
silicone - these are NOT compatible
with the spray gun.

3 4

PSE_Instruction Manual_A.indd 4-5 24/10/2011 13:33

Safety Warnings & Advice continued Safety Warnings & Advice continued

CE - DECLARATION
OF CONFORMITY

Manufacturer:
Company: UQS Global Ltd.
Address: 2nd floor, BuiIding 9, No.1555 West
Jinshajiang Road, Shanghai, China 201803
Contact: Hunter Zhang (Chief Representative)

EU- Importer:
Company: JML Direct Ltd.
Address: JML House, Regis Road, London
NW5 3EG, UK
Contact: FergaI Furey (Product Development
Manager)

Product:
Product designation: Electric Spray Gun
ModeI: Q1P-WYT10-800

In accordance with guidelines:
2006/42/EC
2006/95/EC
2004/108/EC
2002/95/EC
2002/96/EC

The manufacturer hereby declares that the
above mentioned product complies with all
fundamental safety and healthy requirements
of the guideline stated above including their
amendments valid at the time of this declaration.

The following harmonised standards have
been complied with:
EN 60745-1:2009+A11:201 0
EN 60745-2-7:201X
EN 50144-1:1998+A1:2002+A2:2003
EN 50144-2-7:2000
EN 55014-1:2006/+A1:2009
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2006/+A1:2009/+A2:2009
EN 61000-3-3:2008

• Maintain your Paint Sprayer, check

for misalignment or binding of moving
parts, breakage of parts and any
other conditions that may affect the
operation. If damaged in anyway,
contact: JML customer service on

freephone - 0800 781 7831.

• USE the Paint Sprayer Elite,

accessories and application tools in
accordance with these instructions,
taking into account the working
conditions and the work to be carried
out.

• ONLY use nozzles / nozzle inserts

provided by the manufacturer.
NEVER spray without the nozzle
protection in place.

• ALWAYS exercise caution when

cleaning or adjusting the nozzle, if
the nozzle becomes clogged during
spraying, please refer to the cleaning
instructions supplied with this
instructional guide.

• DO NOT overreach, keep proper

footing and balance at all times.

• BEWARE of possible hazards from the

spray material. Observe the information
on any drums, tanks or tins as well as
the manufacturer’s information about
the spray material.

Manufacturer’s instructions are to
be observed in order to reduce the
risk to the user.

• DO NOT spray any materials where the

hazard is not known.

• PREVENT unintentional operation;

ensure the power switch is in the off

position before connecting to the
power supply, picking up or carrying
the Paint Sprayer Elite.

• DO NOT SPRAY outdoors on windy or

rainy days.

• Household use only.

• Intended for indoor/outdoor

use ONLY with materials with a
flashpoint above 70°F (21°C).

HAZARD: GENERAL

PREVENTION

• ALWAYS stay alert and be aware.

Watch what you are doing and use
common sense when handling and/or
operating the Paint Sprayer.

• USE SAFETY EQUIPMENT - Always

use eye protection and a respirator
or protective mask when spraying or
handling chemicals. Safety equipment
such as non-slip shoes, hard hats,
safety gloves, steel toe cap boots and
hearing protection when used in the
appropriate conditions will reduce the
risk of personal injury.

• NEVER point, aim and/or trigger

the spray jet against yourself, other
persons or animals. Keep your hands
and fingers away from the spray jet. If
the spray jet should penetrate the skin,
seek medical advice immediately from
a qualified doctor or nurse.

• DO NOT TREAT skin penetration as a

simple cut. High pressure spray is able
to inject toxins into the body and cause
serious bodily injury. In the event that
injection occurs, seek medical advice
immediately from a qualified doctor or
nurse.

• DO NOT USE the Paint Sprayer if

you are tired, or under the influence of
drugs, alcohol or medication.

• ALWAYS keep the Paint Sprayer Elite

OUT OF THE REACH OF CHILDREN
and DO NOT allow persons unfamiliar
with Paint Sprayer Elite or these
instructions to operate the appliance.

• DRESS PROPERLY - Loose fitting

clothing and jewellery can increase the
risk of injury.

5 6

LpA - Sound Pressure 87 dB(A)

KpA - Sound Pressure
Uncertainty

3 dB(A)

LwA - Acoustic Power 98 dB(A)

LwA - Acoustic Power
Uncertainty

3 dB(A)

Hand-arm Vibration ah10.67 m/s

2

Hand-arm Vibration
Uncertainty

1.5 m/s

2

WARNING - The vibration emission during
actual use of the Paint Sprayer can differ
from the declared total value depending
on the way the tool is used. Identify safety
measures to protect the operator based on
estimated exposure in use.

Noise and Vibration Information

Measured values determined according to
EN 60745

PSE_Instruction Manual_A.indd 6-7 24/10/2011 13:33