JML Handy Heater Instruction Manual

INSTRUCTION MANUAL

Congratulations on your purchase of Handy Heater™ ­the wall outlet space heater! This cordless ceramic
space heater provides quick and easy heat almost
anywhere in your home. Just plug it in, and enjoy the
extra warmth. The two-speed fan ensures you are
always comfortable! The easy to read digital display
also includes the built-in temperature control buttons.

IMPORTANT SAFEGUARD

When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:

Please read and understand this entire
manual before attempting to operate or
install the product.

DESIGNED FOR IN-WALL OUTLET USE ONLY

CAUTION - some parts of this product can become
very hot and cause burns. Particular attention has to be
given where children and vulnerable people are present.

WARNING: Do not use cord extension sets, multiple
socket outlets or adaptors to avoid a risk of danger. Plug
it only into a wall socket outlet.

WARNING: In order to avoid overheating, do not cover
the heater.

WARNING: Do not use this heater in small rooms when
they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is
provided.

WARNING: For indoor use only. Do not use in an

environment where water is present.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this heater.

1. Make sure that your outlet voltage corresponds to the voltage
stated on the rating label of the heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin
touch the hot surface. Use extreme caution when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 1m from the heater.

3. Ensure heater is plugged into a socket in a vertical wall when use,
keep at least 20cm of unobstructed space to the bottom air inlet of the
heater to allow for ventilation to avoid a risk of danger.

4. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.

5. Always unplug heater when not in use.

6. The heater must not be located immediately below a socket-outlet.

7. Do not operate the heater if the plug is damaged or after the heater
malfunctions, or has been dropped or damaged in any manner.
Return heater to JML if damaged and a replacement is required.

8. Do not use this heater in the immediate surroundings
of a bath, a shower or a swimming pool.
Do not use the heater in the bathroom or anywhere that it may be
subjected to splashing water.

9. Do not cover heater with throw rugs, runners, or similar coverings.

10. Never leave the heater on while sleeping.

11. To disconnect heater, switch off, then remove from plug outlet
using extreme caution not to burn oneself.

12. Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.

13. To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where openings
may become blocked.

14. Do not use it in areas where gasoline, paint, or flammable liquids
are used or stored.

15. Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric shock,
or injury to persons.

16. Children aged from 3 years and less than 8 years shall only switch
on/off the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years
and less than 8 years shall not plug in, regulate or clean.

17. Children of less than 3 years should be kept away unless
continuously supervised.
CAUTION - some parts of this product can become very hot and
cause burns. Particular attention has to be given where children and
vulnerable people are present.

18. Do not use outdoors.

19. SPECIAL SAFETY SWITCH-UNIT WORKS AT 90° ANGLE ONLY.

20. Save these instructions for future reference.

CARE AND MAINTENANCE KNOW YOUR HANDY HEATER OPERATING INSTRUCTIONS

SETTING THE TIMER

SPECIFICATION:

Voltage Rating

220-240 V~ 50-60 Hz

Power Consumption

370 W at 25°C

WARNING: Do NOT perform any maintenance on this product. If

the product is not functioning or requires maintenance, contact
customer services to seek advice.
To clean, unplug your Handy Heater

TM

and allow to cool completely.
To clean, wipe the exterior with a non-abrasive, damp cloth. Use
mild soap if necessary. Do NOT spray chemical cleaners onto or
into the unit.

CAUTION: DO NOT LET LIQUID ENTER THE HEATER

Do not use alcohol, gasoline, abrasive powders, furniture polish, or
rough brushes to clean the heater. This may cause damage to the
casing of the heater.
Do not immerse Handy Heater

TM

in water.
Wait until the unit is completely dry before use.
Store unit in a cool dry place when not in use.

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations: hand
in any non-working electrical equipment to an appropriate
waste disposal centre.

GUARANTEE

This product is unconditionally guaranteed for one year against all
defects of workmanship and materials. This guarantee does not affect
your statutory rights.
If you have any problems or queries about this product please contact
JML’s customer service department on freephone 0800 781 7831.

©JohnMillsLtd/VG/09.16/TV/A
Made in China

Distributed by JML

JML, Unit 1 Eastside, Port of Tyne

South Shields, NE33 5SP

Customer Services

UK: 0800 781 7831 (Freephone)

ROI: 041-978 0003 (Local rate)

Email: [e-mail]

1. Plug Handy Heater™
into desired power outlet.

2. Press “On/ Off Switch”
on side of the unit to “On”
position to turn on the
heater.

3. Use the “+” button to
raise temperature or “-”
button to lower the
temperature on Digital
Display.

4. Select your desired fan speed. Press
“Fan Speed Button” to choose between
High (HH) or Low (LL) on “Digital Display”.

5. When finished, press “On/ Off Switch” to
“Off” position and unplug Handy Heater™
from power outlet. Store in a cool, dry place
until next use.

Handy Heater™ has a built-in timer that will
automatically turn the unit off after a set
amount of time.

1. While Handy Heater™ is plugged in and
turned on, press the “Timer Button” to activate timer, as shown.

2. Repeatedly press “Timer Button” to set number of hours before
Handy Heater™ turns off. You can choose between 1 - 12 hours.

3. Once desired hours have been chosen, stop pressing “Timer
Button” to set.

4. To cancel timer, turn Handy Heater™ off.

TEMPERATURE
DOWN
BUTTON

FAN
SPEED
BUTTON

TIMER
BUTTON

ON/OFF
SWITCH

DIGITAL DISPLAY

Front view

TEMPERATURE UP
BUTTON