JML HaloWave User Manual

HW_IM_I.indd 1 23/01/2018 10:11

Contents

1

Thank you for purchasing Halowave
from JML.

To ensure you enjoy all the tastiest,
juiciest, most flavoursome cooking
from Halowave, please read these
instructions in full and keep them
safe for future reference.

Safety Warnings & Advice 2

Your Halowave 5

Before use 5

Assembling Halowave 5

Using Your Halowave 6

Operation 6

Pre-heating 7

Thaw setting 7

Cooking 7

Cooking Times 8

Suggested Recipe Ideas 8

Cleaning & Care 11

Self-Cleaning - ‘Wash’ 11

General Cleaning and Care 11

Changing the Bulb 12

Technical Information 13

Fuse & Mains Plug Replacement 13

Disposal and the Environment 13

Guarantee 13

HW_IM_I.indd 2 23/01/2018 10:11

Safety Warnings & Advice

2

This appliance is intended for domestic use and within
similar environments, such as:

- Staff kitchen areas in shops, offices and other working
environments

- Farm houses

- In hotels, bed and breakfasts, and other residential type
environments

Not intended to be operated by means of an external timer or
separate remote-control system.

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in
order to avoid a hazard.

Keep out of the reach of children.

This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
a lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of this appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.

DO NOT rest the lid on a flammable surface or adjacent to
flammable materials.

WARNING! - The lid should be unplugged when cooking is
complete and before it is lifted from the pot as accidental closure of
the handle will re-energise the heating element.

Always use with the plastic basket to prevent touching the hot
surface while the Halowave is in operation and until it has cooled
after use.

Take care when handling Halowave while hot. Protective wear, such
as oven gloves, can be used when removing hot food.

HW_IM_I.indd 3 23/01/2018 10:11

Safety Warnings & Advice

3

Unplug from the mains power socket when not in use.

Check the power cord and electric plug for signs of damage before
use. Do not use if damaged.

Always use the tongs provided to lift the racks in and out of the
bowl when hot.

Always use the handle to remove the glass lid from the glass bowl.

Ensure Halowave is clean and dry before use.

Only place food in Halowave before setting the timer or after pre­heating.

WARNING! - Only use on a safe, stable, heat-proof work surface
and do not place near the edge of the worktop.

WARNING! - DO NOT touch the hot surfaces. Surfaces remain
hot even after Halowave is switched off.

WARNING! - When operating Halowave on a work surface keep
the surrounding areas clear and free from clutter. Ensure adequate
air space surrounding Halowave for circulation.

DO NOT operate Halowave with other major appliances plugged
into the same power socket – there is a risk of fusing the circuit.

DO NOT stare directly into the bulb.

DO NOT move Halowave when in use.

DO NOT immerse the glass lid, power cord or electric plug in water

or other liquids.

DO NOT use in a manner other than directed.

DO NOT leave Halowave unattended whilst in use.

DO NOT place Halowave on or near a hot gas or electric hob, or in

a heated oven.

DO NOT allow the power cord to hang over the edge of surfaces.

DO NOT allow the power cord to touch any hot surfaces.

HW_IM_I.indd 4 23/01/2018 10:11

Safety Warnings & Advice

4

DO NOT disassemble or modify Halowave in any way.

DO NOT over-fill Halowave; the glass lid must be completely shut.

DO NOT use any accessories other than those supplied with

Halowave.

DO NOT cover Halowave when in use.

DO NOT place paper, cardboard, plastic or other flammable

materials in Halowave.

DO NOT touch the halogen bulb when hot or plugged in.

DO NOT attempt to repair Halowave; if necessary contact JML

customer services.

DO NOT operate Halowave near where aerosol products are being
used.

EXTREME caution must be used when handling or disposing of
hot oils or other liquids.

HW_IM_I.indd 5 23/01/2018 10:11