JML Aero360 Steam Pro Use

Thank you for purchasing Aero 360 Steam Pro from JML. To get the best results
from this presser, please read these instructions in full and keep them safe for
future reference.

Contents

Intended Use ______________________________________________________ 4

Safety Instructions __________________________________________________ 4

Items Supplied and Device Overview ____________________________________ 6

Before Initial Use ____________________________________________________ 6

Use ______________________________________________________________ 7

Cleaning and Storage ________________________________________________ 9

Troubleshooting _____________________________________________________ 9

Technical Data _____________________________________________________ 9

Disposal___________________________________________________________10

Intended Use

• This device is intended to be used to dry and press textiles, for example blouses and
shirts. Delicate textiles such as wool or similar fabrics must not be pressed on the
presser. Always follow the care labels for the textiles!

• The device is for personal use only and is not intended for commercial applications.

• The device should only be used as described in these instructions. Any other use is
deemed to be improper.

Safety Instructions

■ This device may be used by children aged 8 and over and by

people with reduced physical, sensory or mental abilities or a
lack of experience and/or knowledge if they are supervised or
have received instruction on how to use the device safely and
have understood the dangers resulting from failure to comply
with the relevant safety precautions.

■ Children must not play with the device.

■ Cleaning and user maintenance may not be carried out by

children without supervision.

CAUTION: hot surfaces! The motor unit / Telescopic rod

/ Nylon balloon will become hot during use. You should
therefore not touch it during or shortly after use.

■ The device must always be switched off and disconnected

from the mains power when it is not being used and before
assembling, disassembling or cleaning the device.

■ Do not make any modications to the device. If the mains

cable of this device is damaged, it must be replaced by the
manufacturer, its customer service department or a similarly

qualied person (e.g. specialist workshop) in order to avoid any

hazards.

■ Allow the device to cool down completely before it is cleaned

and stored away.