Jewell Instruments RMIW Data sheet

RMIW-S Series

0-5Vdc Output

Making Sense out of Motion…

Input Ranges From ±3°

to ±90° Rugged, High

Precision, Low Cost,

Single-Ended Power Input

Inclinometer

The Jewell

Emerald Series

inclinometer is a low cost, high

precision inclinometer designed

with higher accuracy than

Outline Diagram

comparable MEMS devices.

Applications include robotics,

construction equipment, industrial

measurement and control, and

precision machining.

Features

• Mounts horizontally or vertically

to match the AccuStar footprint

• Extremely Rugged

• Lower Cost than traditional Force

Balanced Inclinometers

• High Accuracy

• Greater Precision than MEMS

Technologies

• Withstands up to 500g shock

• 0-5 VDC Output

• Single-Ended Power Input

Dimensions in inches [mm]

Applications

•

Wheel Alignment

•

Antenna Positioning

•

Robotics

•

Cross Rail Management

•

Tilt Safety Systems

•

Industrial and Machining Equipment

•

Stadium Loudspeaker Positioning

[e-mail]

•

www.jewellinstruments.com

•

Tel [phone]

• Construction Equipment

Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103

Wire Description

Wiring Code

Rev. B

RMIW-S Series

0-5Vdc Output

Making Sense out of Motion…

Performance Specifications

Custom Capabilities

•

±15V bipolar input option available

•

Pigtail and Connector alternative

•

Custom ranges and bandwidths

available

Note 2: Nonlinearity is specified as deviation of output referenced to theoretical sine function value, independent of misalignment.

Note 3: Full Resolution is achieved with noise reduction techniques.

Jewell Instruments LLC

,

850 Perimeter Road, Manchester, NH 03103

[e-mail]

•

www.jewellinstruments.com

•

Tel [phone]

1 -

±3°

2 -

±14.5°

3 -

±30°

4 -

±45°

5 -

±60°

STATIC/DYNAMIC

Input Range, °: ±3 ±14.5 ±30 ±45 ±60 ±90

Full Range Output (FRO -Note 1) VDC ±0.5%:
Nonlinearity (Note 2) % FRO maximum:
Scale Factor, Volts/g, nominal:
Scale Factor Temp. Sensitivity (SFTS), PPM /°C maximum:
Bandwidth (-3 dB), Hz nominal:
Output Axis Misalignment, ° maximum:
Pendulous Axis Misalignment, ° maximum:
0° Output, Volts range:
0° Output Temp. Sensitivity, Volts /°C maximum:
Resolution and Threshold (Note 3), µradians maximum:
Weight:

ELECTRICAL ENCLOSURE

Number of Axes: 1 Seal: IP65
Input Voltage Range, (VDC): +15 to +30
Input Current, mA, max: 40

0-5 0-5 0-5 0-5 0-5 0-5

0.05 0.02 0.02 0.02 0.04 0.05

47.8 10.0 5.0 3.5 2.9 2.5
100 100 100 100 100 100

5.0 5.0 5.0 5.0 5.0 5.0

0.25 0.50 0.50 0.50 0.50 0.50

0.25 0.50 0.50 0.50 0.50 0.50

2.45 to 2.55

0.0035 0.001 0.0070 0.0005 0.0005 0.0005

3.5 3.5 3.5 3.5 3.5 3.5

4.2 4.2 4.2 4.2 4.2 4.2

Output Impedance, Ohms, nom: 10
Noise, Vrms, maximum: 0.002

options available

ENVIRONMENTAL

Operating Temp Range:
Storage Temp Range:
Shock:

Notes: Note 1: Full Range is defined "from negative full input angle to positive full input angle."

-55°C to +85°C

-60°C to +90°C

500g, 1 msec, ½ sine

How to Order

02550290 - 1 0 4

RMIW-S Series

Single-ended

Power with

0-5Vdc Output

Mount Options

Range Options

6 - ±90°

0 - Floor Mount
1 - Wall, Vertical Mount
2 - Wall, Horizontal Mount