Jewell Instruments C801 Specifications

Model C801 “Tuff Tilt 420” Tiltmeter
The model C801 “Tuff Tilt 420” delivers the same precision and durability of our A801, but with 4-20mA output. Units are available in single axis (uniaxial), and dual axis (biaxial) tilt configurations. The Tuff Tilt 420 is current loop powered, so tilt measurements are made using an economical 2-wire pair, and because output is 4-20mA there is no signal loss over long cables. Units also include an on-board thermistor for temperature measurements. All units are rated IP65 waterproof for advanced protection from the elements. Use the C801 for structural monitoring, 4-20mA PLC systems, industrial measurement and control, or anywhere long cable runs are necessary.
High-Gain Standard Wide-Angle Angular Range Resolution Repeatability Non-Linearity 1% 2% 0.5% Scale Factor Kz Temp Coefficient (deg/C) Ks Temp Coefficient (%/°C)
Time Constant 0.15 sec Output 4-20mA Two-wire current loop (per axis) Channels Tilt, Temperature Output Impedance 270 ohms Temperature Output Power (0.02 Ampere x R + 10 VDC) < Vs < 29 VDC Environmental Dimensions 120 x 80 x 60 mm, 0.5 kg (1.1 lb.) Materials Diecast painted aluminum, Cable 3m (10 ft.), 5-conductor + one overall shield, PVC jacket, tinned ends
Specifications subject to change without notice on account of continued product development
±0.5° ±3.0° ±50° <0.0001° 0.0006° 0.01° <0.0002° 0.001° 0.02°
0.0625°/mA 0.375°/mA 6.25°/mA ±0.0002°/°C (typical) ±0.002°/°C (typical)
<0.04%/°C (typical) <0.1%/°C (typical)
0.1°C/mV typical (single ended; 0°C = 0mV)
-40 to +85°C operation and storage. IP65
Ordering Code: Accessories:
Part No. Description
81439 Mounting bracket for vertical surfaces
84051
70369
62204
62202
Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103
sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955
Mounting plate for horizontal surfaces 6-conductor cable (specify total length on order) Optional 6-pin male receptacle (installed on tiltmeter cable) Optional 6-socket in-line plug (mates to P/N 62204 connector)
L00255 Rev. B
Model C801 “Tuff Tilt 420” Tiltmeter
Dimensions:
Dimensions in inches (mm)
Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103
sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955
L00255 Rev. B
+ 1 hidden pages