Jet Tools Table Saw User Manual

OWNER'S MANUAL

Tablesaw / Router Cabinet

JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:[phone]

A WMH Company Auburn, WA 98071-1349 Fax: [phone]
www.jettools.com e-mail [e-mail] M-708308 05/01

This manual has been prepared for the owner of a JET XACTASAW™ Cabinet. Its purpose, aside from
machine operation, is to promote safety through the use of accepted correct operating and maintenance
procedures. Completely read the safety and maintenance instructions in your tablesaw and/or Rout-R­Lift™ manuals before operating or servicing the machine. To obtain maximum life and efficiency from
your cabinet, and to aid in using the tablesaw and/or Rout-R-Lift safely, read all manuals thoroughly and
follow instructions carefully.

Warranty & Service

The JET Group warrants every product it sells. If one of our tools needs service or repair, one of our
Authorized Repair Stations located throughout the United States can give you quick service.

In most cases, any one of these JET Group Repair Stations can authorize warranty repair, assist you in
obtaining parts, or perform routine maintenance and major repair on your JET, Performax or Powermatic
tools.

For the name of an Authorized Repair Station in your area, please call 1-800-274-6848.

More Information

Remember, the JET Group is consistently adding new products to the line. For complete, up-to-date
product information, check with your local JET Group distributor.

JET Group Warranty

The JET Group (including Performax and Powermatic brands) makes every effort to assure that its
products meet high quality and durability standards and warrants to the original retail consumer/purchaser
of our products that each product be free from defects in materials and workmanship as follow: 1 YEAR
LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED OTHERWISE. This Warranty does
not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and­tear, repair or alterations outside our facilities, or to a lack of maintenance.

THE JET GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, FROM
THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY
IMPLIED WARRANTIES OR MERCHANTIBILITY AND FITNESS ARE EXCLUDED. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. THE JET GROUP SHALL IN NO EVENT BE LIABLE FOR
DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL,
OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES
DO NOT ALLOW THE EXLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

To take advantage of this warranty, the product or part must be returned for examination, postage
prepaid, to an Authorized Repair Station designated by our office. Proof of purchase date and an
explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we
will either repair or replace the product, or refund the purchase price if we cannot readily and quickly
provide a repair or replacement, if you are willing to accept a refund. We will return repaired product or
replacement at JET’S expense, but if it is determined there is no defect, or that the defect resulted from
causes not within the scope of JET’S warranty, then the user must bear the cost of storing and returning
the product. This warranty gives you specific legal rights; you may also have other rights which vary from
statetostate.

The JET Group sells through distributors only. Members of the JET Group reserve the right to effect at
any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they
may deem necessary for any reason whatsoever.

2

Unpacking

Open shipping container and check that all parts
are intact. Report any damage immediately to
your distributor. Read the instruction manual
thoroughly for assembly and alignment
instructions.

Box contents:

1 Back Panel
2 Side Panels
1 Bottom Panel
1 Top Panel
3 Angle Brackets
2SmallShelves
1 Large Shelf (used with closed stand saws)
4 Leg assemblies
1 Hardware bag
1 Door Handle
2 Hinges

The contents of the hardware bag are drawn full
scale in Figure 1.

Installation

Tools required

• Phillips Screwdriver, or electric drill with
Phillips head driver.

• 7/16" and 3/8" wrenches, or socket
wrenches will make assembly easier.

The JET cabinet can be used as an optional
attachment to a router table or extension table
ontheJETtablesaws. Itmayalsobeusedasa
stand-alone router table. The extension table
must already be mounted before installing the
cabinet. Consult your XACTA™ Fence manual
for proper installation of the extension table.

Assembling the Cabinet

1. Place the back panel onto the floor as
showninFigure2. Note: You may need to
place a cloth beneath it to protect the
cabinet surface.

2. Flip up all the tabs on the fasteners that are
attached to each panel, see Figure 3.

3