Jet Tools JWBS14DXPRO User Manual
14" DELUXE PRO
BANDSAW
The all-new (patented) JWBS-14DXPRO 14" Bandsaw
from JET® has been completely redesigned from top
to bottom to meet the needs of today’s most demand-
ing woodworkers. Gone are the days of adding a riser
block; this 14" bandsaw comes with a newly rede-
signed massive upper and lower cast iron frame specif-
ically designed to handle much higher blade tensioning
with virtually no frame deflection. The rigidity of the
newly redesigned frame allows for even the toughest
re-sawing jobs up to 12". Couple this incredible fea-
ture with a new high tension spring design, rack-in-pin-
ion blade guide post, and storage in the stand and you
have a bandsaw that can handle any job. Put a new Jet
14" Deluxe Pro Bandsaw in your shop and you’ll know
that Jet tools are “Built Better to Build Better”.
STOCK NO. ?
11/08
©2008 WMH TOOL GROUP, Inc. All Rights Reserved.
jettools.com
14" DELUXE PRO BANDSAW
Upper and lower ball bearing guides
reduce friction for longer blade life
New high tension spring design
allows for greater blade tensioning
Quick release blade tension for
convenience
14" DELUXE PRO BANDSAW
• Built-in 12" resaw capacity for cutting larger pieces of wood
• 2 Speed poly-v belt drive system
• Newly designed upper and lower cast iron frame for increased
strength and rigidity
• Easy to view blade tracking window
• Blade guide post with rack and pinion adjustment
• Upper and lower ball bearing guides reduce friction for longer
blade life
• Quick release blade tension for convenience
• New enclosed stand with storage shelf and easy access door
• Built-in retractable blade guard moves up and down from 0-12"
resaw
• New high tension spring design allows for greater blade
tensioning
New enclosed stand with storage
shelf and easy access door
SPECIFICATIONS
Stock Number 710116K
Model JWBS14DXPRO
Net Weight (lbs.) 243
Gross Weight: (lbs.) 256
Cutting Capacity (W/in.): 13-1/2
Cutting Capacity (H/in.): 12
Minimum Saw Blade (W/in.): 1/8
Maximum Saw Blade (W/in.): 3/4
Blade Speed (SFPM): 1500/3000
Blade Length (in.): 105
Table Dimension (LxW/in.): 15 x 15
Table Tilt (deg.): 45R, 10L
Table Height From Floor (in.): 43-1/2
Dust Port Diameter (OD/in.): 4
Dust Collection Minimum CFM: 300
Stand Type: closed
Wheel Diameter (in.): 14
Motor HP: 1-1/4
Motor Phase: 1
Motor Voltage: 115/230
Prewired: 115
jettools.com
Loading...