JET HP-5A, HP-15A, HP-35A Operating Instructions and Parts Manual
Hydraulic Press Parts List
Models HP-5A/15A/35A
Model HP-15A shown
WALTER MEIER (Manuf acturing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M- 331406
Ph.: 800-274-6848 Revision B 12/09
www.walt er meier.c om Copyright © 2009 Walt er Meier (M anufacturi ng) Inc.
W arranty and Servi ce
Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of
our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any
of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or
®
perform routine maintenance and major repair on your JET
your area call 1-800-274-6848.
MORE INFORMATION
Walter Meier is consistently adding new products to the line. For complete, up-to-date product information, check with
your local Walter Meier distributor, or visit waltermeier.com.
WARRANTY
JET products carry a limited warranty which varies in duratio n based upon the product (MW = Metalworking, WW =
Woodworking).
WHAT IS COVERED?
This warranty covers any defects in workmanship or materials subject to the e xceptions stated below. Cutting tools,
abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED?
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE?
The general JET warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED?
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational
purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education
purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse,
abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name
of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the
merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price,
at our option. We will return the repaired product or replacement at our expense unless it is determined by us that
there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will,
at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be
responsible for the shipping and handling costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WALTER MEIER (MANUFACTURING) INC., LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE
LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR
MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME ST ATES DO NOT ALLOW LIMITATIONS ON HOW
LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
WALTER MEIER SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR
FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF
OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Walter Meier sells through distributors only. The specifications in Walter Meier catalogs are given as general
information and are not binding. Members of Walter Meier reserve the right to effect at any time, without prior notice,
those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason
®
whatsoever. JET
branded products are not sold in Canada by Walter Meier.
tools. For the name of an Authorized Service Center in
2
Table of Contents
Warranty and Service..........................................................................................................................2
Table of Contents ...............................................................................................................................3
Warn in g .............................................................................................................................................4
Spe cifi cation s .....................................................................................................................................5
Ass embly ...........................................................................................................................................5
Replacement Parts .............................................................................................................................5
HP-5A Head Assembly ....................................................................................................................6
HP-5A Head Assembly – Part s List...................................................................................................7
HP-5A Frame Assembly...................................................................................................................8
HP-5A Frame Assembly – Parts List .................................................................................................9
HP-15A Head Assembly ................................................................................................................ 10
HP-15A Head Assembly – Part s List ............................................................................................... 11
HP-15A Frame Assembly............................................................................................................... 13
HP-15A Frame Assembly – Parts List ............................................................................................. 14
HP-35A Head Assembly ................................................................................................................ 15
HP-35A Head Assembly – Part s List ............................................................................................... 16
HP-35A Frame Assembly............................................................................................................... 18
HP-35A Frame Assembly – Parts List ............................................................................................. 19
3
Warning
1. Read and understand all safet y w ar nings.
2. Replace the warning labels if they become obscured or removed.
3. This press is designed and intended for use by properly tr ained and exper ienced personnel only. If
you are not familiar wit h the proper and safe operat ion of an hydraulic press, do not use until proper
training and knowledge has been obtained
4. Do not operate this press beyo nd its rated c apacit y.
5. This press is designed for pr ess ing, bending, a nd straighte ni ng purposes only.
6. Do not operate this tool while tired or under the influence of drugs, alco hol or any medicatio n.
7. Check the press for loose or damaged parts before each operation. Replace damaged parts and
tighten all loose bolts before oper ating.
8. Some parts being pressed may have a tendency to pop o ut of the press or explode under press ure.
Protect yourself accordingly.
9. Always wear approved safety glasses/face shields and personal safety equipment. (Everyday
eyeglasses only have impact r esist ant lenses; t hey are not safet y glasses.)
10. Failure to comply wit h t hese war nings may result in serious inj ury.
4
Specifications
Model Number ............................. HP-5A ................................... HP-15A .................................. HP-35A
Stock Number ............................ 331406 .................................... 331416 .................................. 331431
Capacity (ton) ...................................... 5 ........................................... 15 .......................................... 35
Ra m Diamete r (in.) ........................ 1-3/4 ....................................... 2-1/2 ............................................ 3
Pi ston Strok e (in .) ................................ 4 ....................................... 4-1/2 .......................... ............ 4-3/4
Scre w Strok e (in .) ................................ 3 ....................................... 3-1/8 ............................................ 4
Work Table (in.) ...................... 19 x 5-1/2 ...........................24-3/4 x 7-1/2 ............................. 31 x 10- 3/8
Lateral Movement (in.) ...................... NA .................................... 10-3/16 .......................................... 15
Vertical Travel (in.)........................18-3/4 .................................... 22-3/16 .................................... 22 -1/4
Base Size (in.) ...................... 23-1/2 x 26 .........................33-7/8 x 29-1/2 ....................... 43-1/2 x 55-1/2
He ight (in.) ...................................51-1 /2 ........................................... 65 .......................................... 68
Net Weight (lbs.) ...............................154 ..........................................431 ........................................ 704
The above specificati ons were current at t he time this ma nual w as publis hed, but because of o ur policy of
continuo us impro vement, Walt er M eier ( M anufacturi ng) Inc., reser ves the right to change spec ificat io ns at
any time and without prior notice, w ithout i ncurri ng obligations.
Assembly
1. Bolt the stand feet to t he stand frame with the enc losed hardware.
2. Replace t he hex filler pl ug (part #17 – HP-5A, par t #8A – HP-15A, a nd part #8D – HP-35A) with t he
enclosed vented plug.
Replacement Parts
To order par ts or reach our ser vice depar tment, call 1-800- 274-6848, Mo nday t hro ug h Friday ( see our
website f or business hours, www.walter meier.com). Having the Model Number a nd Serial Number of y our
mac hi n e a vaila ble when you cal l will al lo w us to s e rve you qu ic k ly and accurately.
5
HP-5A He ad Assembly
6
Loading...