JET 756050 User Manual

Operating Instructions and Parts Manual

SR-1650M Slip Roll

JET

427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-756050
Ph.: 800-274-6848 Revision A2 08/2014
www.jettools.com Copyright © 2014 JET

Warranty and Service

JET warr ants ev ery p rodu ct it sells agai nst manuf acturers’ defects. If o ne of our tools need s ser vice or rep air, please
contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.

Warranty Period
The general warranty lasts for the time period specified in the literature included with your product or on the official
JET branded website.

• JET products carry a limited warranty which varies in duration based upon the product. (See chart below)

• Accessories carry a limited warranty of one year from the date of receipt.

• Consumable items are defined as expendable parts or accessories expected to become inoperable within a

reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects.

Who is Covered

This warranty covers only the initial purchaser of the product from the date of delivery.

What is Co vered

This warranty covers any defects in workmanship or m aterials subj ect to the limit ati ons st ated b elow . This warranty
does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear,
improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood.
Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions
are acrylics and other natural items that are made specifically for wood turning.

Warranty Limitations

Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a
Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.

How to Get Technical Support
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provi d e pr o of
of initial purchase when calling. If a product requires furt h er in s p ection, the Technical Servi c e representative will

explain and assist with any additional action needed. JET has Authorized Service Centers located throughout the
United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service
Center Locator on the JET website.

More Information

JET is constantly adding new products. For complete, up-to-date product information, check with your local distributor
or visit the JET website.

How S tate Law A pplies

This warranty gives you specific legal rights, subject to applicable state law.

Limitations on This Warranty

JET LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT.
EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTI ES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
JET SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR
INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR
PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are
given as general information and are not binding. JET reserves the right to effect at any time, without prior notice,
those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason
whatsoever. JET

Product Listing with Warranty Period

90 Days – Parts; Consumable items; Light-Duty Air Tools
1 Year – Motors; Machine Accessories; Heavy-Duty Air Tools; Pro-Duty Air Tools
2 Year – Metalworking Machinery; Electric Hoists, Electric Hoist Accessories; Woodworking Machinery used
for industrial or commercial purposes
5 Year – Woodworking Machinery
Limited Lifetime – JET Parallel clamps; VOLT Series Electric Hoists; Manual Hoists; Manual Hoist
Accessories; Shop Tools; Warehouse & Dock products; Hand Tools

NOTE: JET is a division of JPW Industries, Inc. References in this document to JET also apply to JPW Industries,
Inc., or any of its successors in interest to the JET brand.

®

branded products are not sold in Canada by JPW Industries, Inc.

2

For your own safety, read the owner’s manual before operating the slip roll.

This slip roll is designed and intended for use by properly trained and experienced personnel

only. If you are not familiar with the proper and safe operation of a slip roll, do not use until

proper training and knowledge has been obtained.

1. KEEP GUARDS IN PLACE and in working order.

2. KEEP ALL BODY PARTS AWAY FROM MOVING PARTS. Avoid placing any part of your body
near belts, cutt er s, gear s, etc.

3. DO NOT EXCEED 16 GAUGE RATED CAPACITY on this slip roll.

4. KEEP THE WORK AREA CLEAN. Cluttered areas and work benche s invite accidents.

5. KEEP CHILDREN AWAY. All visitors should be kept a safe distanc e from the work area.

6. MAKE THE WORKSHOP KID PROOF with padlocks, m aster switc hes, or by removing starter keys.

7. DON’T FORCE THE MACHINE. It will do the job better and safer at the rate for which it was
designed.

8. USE THE RIGHT MACHINE. Don’t force a machine or attachment to do a job for which it was not
designed.

9. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck ties, rings, bracelets, or other
jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective
hair covering to contain long hair.

10. ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutt ing operation is dusty.
Everyday eyeglasses only have impact resistant lenses; they are not safet y gl asses.

11. DON’T OVERREACH. Keep proper f ooting and balance at all times.

12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and cl ean for the best and safest performance.
Follow instructions for lubricati ng and c hanging accessories.

13. NEVER STAND ON A MACHINE. Serious injury c ould occur if t he m ac hine tipped.

14. CHECK DAMAGED PARTS. Before furt her use of the mac hine, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform its
intended function - check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any ot her c onditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.

15. SHEET METAL STOCK HAS SHARP EDGES. To prevent cuts, use caution when handling.

16. KEEP HANDS AND FINGERS clear of the area in front and rear of the rolls.

17. DO NOT USE THE MACHINE for any purpose other t han for whic h it was designed

18. FAILUR E TO C OM PLY with all of these warnings may cause serious i njury.

19. SOME DUST CREATED BY power sanding, sawing, gr inding, drilling and other construction
activities contains chemicals known to cause cancer, bir th defects or other reproduc tive harm. Some
examples of these chemicals are:

• Lead from lead based paint

• Crystalli ne sil ic a from bricks and cement and other masonry produc ts, and

• Arsenic and chromium from chemically-tr eated lumber.

YOUR RISK FROM THOSE EXPOSURES varies, depending on how often you do this type of work.
To reduce your exposure t o these chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specifically designed to fil ter out microscopic
particles

20. DO NOT OPERATE TOOL while under the influence of drugs, alcohol or any m edic ation.

3