JET 719203A Operating Instructions and Parts Manual

Assembly Instructions and Parts List

Stand Extension for JWL-1221VS Lathes

Stock No. 719203A

Read and understand the entire

owner's manual that accompanied your JWL­1221VS lathe before attempting assembly or
operation of accessories.

Inspect contents for shipping damage. Report any
damage or part shortages to your distributor. Do not
discard shipping materials until accessory is set up
and functioning properly.

Shipping contents

1 Cross bar
1 Leg
1 Bracket
2 Tube caps
2 Levelers with hex nut
1 Hardware package, includes:

2 Socket head cap screws, 5/16x3/4
2 Lock washers, 5/16
2 Flat washers, 5/16
6 Socket head cap screws, M8x80
8 Flat washers, 8mm
2 Hex nuts, M8

Tools required for assembly

2. Install cross bar [4] to middle set of holes with
screws and washers [7/8]. Make screws snug
but do not fully tighten yet.

3. Install bracket [1] onto leg with screws,
washers, and nuts [7/8/9]. Gussets on bracket
should face inward. Multiple holes allow
adjustment of lathe height. Make nuts snug but
do not fully tighten yet.

4. Place lathe onto stand brackets, and secure
with screws and washers [10/11/12]. Insert both
screws first, then tighten each securely.

5. Fully tighten all screws and nuts in cross bar [4]
and bracket [1].

6mm hex key (“Allen wrench”)
Open-end wrenches, 13mm (1/2"); 14mm (9/16”)

Assembly

Refer to exploded view on reverse side for parts
clarification. Bracketed numbers refer to index
numbers in exploded view.

Refer to documents M-719201 and M-719202A for
instructions on assembling optional Bed Extension
and Stand to lathe.

1. Install two levelers [5] into bottom of leg. A
leveler can be adjusted for height and leveling
of lathe. Tighten hex nut against leg to secure
setting.

JET

427 New Sanford Road
LaVergne, Tennessee 37086 Manual No. M-719203A
Ph.: 800-274-6848 Edition 1 03/2017
www.jettools.com Copyright © 2017 JET, a Division of JPW Industries, Inc.

Specifications

Stock no. 719203A
Assembled dimensions (WxDxH) approx.

Shipping dimensions (WxDxH) approx. 790 x 660 x 200 mm (31.1 x 26 x 7.9 in.)
Net weight (approx.): 10 kg (22 lbs)

Shipping weight (approx.): 13 kg (28.6 lbs)

571 x 584 x 800 mm (22.5 x 23 x 31-1/2 in.)

Stand with extension: 1333 x 584 x 800 mm (52.5 x 23 x 31-1/2 in.)

# 719203A Stand extension for JWL-1221VS lathes

Index No Part No Description Size Qty

1 ................. JWL1221VSS-101 ....... Bracket ......................................................................... .................................... .... 1

2 ................. JWL1221VSS-102 ....... Leg ............................................................................... ........................................ 1

3 ................. JWL1221VSS-103 ....... Tube Cap ..................................................................... ........................................ 2

4 ................. JWL1221VSS-204 ....... Cross Bar ..................................................................... ........................................ 1

5 .................

6 .................

7 ................. F005301 ...................... Hex Socket Hd Cap Screw SS ..................................... M8-1.25 x 80 ................... 6

8 ................. TS-1550061 ................ Flat Washer * ............................................................... M8 ................................... 8

9 ................. TS-1540061 ................ Hex Nut *...................................................................... M8 ................................... 2

10 ............... TS-0680031 ................ Flat Washer * ............................................................... 5/16” ................................ 2

11 ............... TS-0720081 ................ Lock Washer * .............................................................. 5/16” ................................ 2

12 ............... TS-0208041 ................ Socket Head Cap Screw *............................................ 5/16”-18x 3/4” .................. 2

................... JWL1221VSS-HP ........ Hardware Package (includes items with *) ................... ..........................................

JWL1642-206 ............ Leveler ......................................................................... ........................................ 2

TS-0561031 ............... Hex Nut ........................................................................ 3/8”-16 ..................... ........ 2

Note: Hardware package may include extra fasteners.
To order parts or reach our service department, call 1-800-274-6848 Monday th rough Friday, 8:00 a. m. to 5:00

p.m. CST. Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.

Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET.
Some parts are shown for reference only, and may not be available individually.