Assembly Instructions and Parts List
Stand Extension for JWL-1221VS Lathe
Stock No. 719203
Read and understa nd the entire owner's m anual that accompanied yo ur JWL-1221VS
lathe before attempting assembly or operation of accessories.
Inspect contents for shipping damage. Report any damage or part shortages to your di stributor. Do not discard
shipping materials until accessory is set up and functioning properly.
Shipping contents
1 Cross bar
1 Tube
1 Bracket
2 Socket head button screws, 5/16x1
4 Socket head button screws, 5/16x1/2
4 Lock washers, 5/16”
6 Flat washers, 5/16”
1 Leveling pad with nut
2 Socket head cap screws, 5/16x1
Tools requi red for assemb ly
5mm and 6mm hex keys (“Allen wrenches”)
Adjustable wrench
Assembly
(Parts in brackets refer to index numbers in the
exploded view. Refer to document M-719201 for
instructions on assembling optional Bed Extension
to lathe).
1. If not already mounted, screw leveling pad with
nut [4/3] into bottom of tube [2]. The leveling
pad can be adjusted for height, and the nut
tightened up against the tube to secure the
setting.
2. Remove the right leg from your lathe.
WARNING: Use an assistant or block up the
lathe to support it during these procedures!
3. Insta ll the le g just re moved to the end of the
bed extension.
4. Install the middle leg beneath center of lathe
with two 5/16x1-1/4 hex cap screws [8], lock
washers [6], and flat washers [7]. Secure tool
tray and cross bar to this middle leg.
5. Install new cross bar [9] between legs with four
5/16x1/2 socket head button screws [5] and
flat washers [7] and tighten.
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-719203
Ph.: 800-274-6848 Revision A1 02/2014
www.jettools.com Copyright © 2014 JET
Specifications
Stock number ................................................................................................................................................ 719203
Assembled dimensions ............................................................................119 x 229 x 719 mm (4.7”L x 9”W x 28.3”H)
Net weight ....................................................................................................................................... 8.5 k g (1 8.74 lb )
Shipping dimensions ............................................................................... 760 x 300 x 165 mm (29.92 x 11.81 x 6.50”)
Shipping weight ..............................................................................................................................10.5 kg (23.15 lb)
Specifications were current at time of publication, but because of our poli cy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
# 719203 Stand extension for JWL-1221VS lathe
Index No Part No Description Size Qty
1 ................ JWL1221VS-401 ........ Upper Bracket ........................................................... ...................................... 1
2 ................ JWL1221VS-602 ........ Tub e ......................................................................... ...................................... 1
3 ................ TS-0561031 ............... Hex Nut .................................................................... 3 /8” ............................. ... 1
4 ................ JWL1642-206 ............. Leveling Pad ............................................................. ...................................... 1
5 ................ TS-0255021 ............... Socket Head Button Screw ........................................ 5/16”-18x1/2” .................. 4
6 ................ TS-0720081 ............... Loc k Was he r ............................................................. 5/1 6 ” .............................. 4
7 ................ TS-0680031 ............... Flat Washe r .............................................................. 5 /16 ” .............................. 6
8 ................ TS-0208071 ............... Socket Head Cap Screw ............................................ 5/16 ”-18x1-1 /4” ............... 2
9 ................ JWL1221VS-609 ........ Cross Bar.................................................................. ...................................... 1
10 .............. JWL1221VS-417 ........ Socket Head Button Screw ........................................ 5/16”-18x1” .................... 2
To order parts or reach o ur service department, call 1-80 0-274-6848 Monday through Fr iday (see our w ebsite
for busin ess hours, www. jettools.com). Having the Model Number and Serial Number of your machine available
when you call will allow us to serve you quickly and accurately.
Loading...