JET 719202 Operating Instructions and Parts Manual

Assembly Instructions and Parts List
Stand for JWL-1221VS Lathe
Stock No. 719202
Read and understand the
entire owner's manual that accompanied your JWL-1221VS lathe before attempting assembly or operation of accessories.
Inspect contents for shipping damage. Report a ny damage or part shortages to your distributor. Do not discard shipping materials until accessory is set up and functioning properly.
Shipping contents
1 Tool basket assembly 1 Cross bar 2 Stands 2 Tubes 2 Brackets 2 Hex cap screws, M12x35mm 2 Lock washers, M12 2 Flat washers, M12 4 Socket head cap screws, 5/16x1-1/4” 4 Socket head button screws, 5/16x1” 8 Socket head button screws, 5/16x1/2” 8 Lock washers, 5/16” 12 Flat washers, 5/16” 4 Levelers with 3/8” hex nut
Tools requi red for assemb ly
5mm and 6mm hex keys (“Allen wrenches”) Ratchet wrench with 19mm socket an d exten sion 9/16” (or adjustable) wrench
Assembly
(Parts in brackets refer to index numbers in the exploded view.)
1. Install a leveler [18] with nut [19] at each end of a stand [2]. The levelers can be adj usted for height, and the hex nut tightened up against the stand [2] to secure the setting.
2. Assemble each stand [2] (the recess will face outward) to a tube [3], with hex cap screw [6], lock washer [16] and flat washer [15]. The
JET
427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-719202 Ph.: 800-274-6848 Revision B3 06/2015 www.jettools.com Copyright © 2015 JET, a Division of JPW Industries, Inc.
holes in the tubes should face inward. Firmly tighten the screw.
3. Mount a bracket [1] to eac h leg set (the ledge will face inward) with two 5/16x1” button head screws [17] and lock washers [13]. Multiple holes allow adjustment of lathe height. Do not fully tighten yet.
4. Install cross bar [8] and tool tray [7] between the legs with 5/16x1/2” button head screws [5] and flat washers [12]. Do not fully tighten cross bar or tool tray yet.
5. With help from an assistant, place your lathe onto the stand brackets, and secure with four 5/16x1-1/4 socket head cap screws [14], lock washers [13] and flat washers [12]. Firmly tighten screws.
6. Fully tighten all screws used in steps 2 thru 4.
Specifications
Stock number: ................. 719202
Assembled dimensions: .. 788 x 574 x 719 mm (31”L x 22.6”W x 28.3”H)
Net weight: ..................... 33 kg (72.75 lb)
Shipping dimensions: ..... 760 x 710 x 205 mm
(29.92 x 27.95 x 8.07”)
Shipping weight: ............. 36kg (79.37 lb)
# 719202 Stand for JWL-1221VS Lathe
Index No P art No Description Size Qty
1 ................ JWL1221VS-401 ........ Upper Bracket ........................................................... ...................................... 2
2 ................ JWL1221VS-402A ...... Stand Foot ................................................................ ...................................... 2
3 ................ JWL1221VS-403 ........ Tube ......................................................................... ...................................... 2
5 ................ TS-0255021 ............... Socket Head Button Screw ........................................ 5/16”-18x1/2” .................. 8
6 ................ TS-1492031 ............... Hex Cap Screw ......................................................... M12-1.75Px35 ................ 2
7 ................ JWL1221VS-407 ........ Tool Tray .................................................................. ...................................... 1
8 ................ JWL1221VS-408 ........ Cross Bar.................................................................. ...................................... 1
9 ................ JWL1221VS-409 ........ Tool Tray Cover ........................................................ ...................................... 1
10 .............. JWL1221V S-410 ........ Machine Tapping Screw ............................................ 3.5x10 .......................... 10
11 .............. JWL1221VS-411A ...... Plate ......................................................................... ...................................... 1
12 .............. TS-0680031 ............... Flat Wash e r .............................................................. 5/16” ............................ 1 2
13 .............. TS-0720081 ............... Loc k Was he r ............................................................. 5/16 ” .............................. 8
14 .............. TS-0208071 ............... Socket Head Cap Screw ............................................ 5/16”-18 x1-1 /4” ............... 4
15 .............. TS-0680061 ............... Flat Wash e r .............................................................. M12 ............................... 2
16 .............. TS-2360121 ............... Loc k Was he r ............................................................. M12 ............................... 2
17 .............. JWL1221V S-417 ........ Socket Head Button Screw ........................................ 5/16”-18x1” .................... 4
18 .............. JWL1015-204 ............. Leve le r...................................................................... ...................................... 4
19 .............. TS-0561031 ............... He x Nut .................................................................... 3 /8” -16 ........................... 4
.................. J WL1221VS-420 ........ Stand Foot with Levelers Assembly (includes #2,18,19)..................................... 2
To order parts or reach o ur service department, call 1-80 0-274-6848 Monday through Fr iday (see our w ebsite for busin ess hours, www. jettools.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.
Loading...