Assembly Instructions and Parts List
Stand for JWL-1015/1015VS Lathes
Stock No. 719102A
Read and understand the
entire owner's manual that accompanied your
JWL-1015 lathe before attempting assembly or
operation of accessories.
Inspect contents for shipping damage. Report any
damage or part shortages to your distributor. Do
not discard shipping materials until accessory is set
up and functioning properly.
Shipping contents
1 Cross bar
2 Legs
2 Brackets
4 Tube caps
4 Levelers with hex nut
1 Hardware package, includes:
4 Socket head cap screws, 5/16x3/4
4 Lock washers, 5/16
4 Flat washers, 5/16
8 Socket head cap screws, M8x80
12 Flat washers, 8mm
4 Hex nuts, M8
Tools required for assembly
3. Mount a bracket [1] to each leg with screws,
washers, and nuts [7/8/9]. Gussets on
brackets should face toward each other.
Multiple holes allow adjustment of lathe height.
Make nuts snug but do not fully tighten yet.
4. Place lathe onto stand brackets, and secure
with screws and washers [10/11/12]. Insert all
four screws first, then tighten each securely.
5. Fully tighten all screws and nuts in cross bar
[4] and brackets [1].
6mm hex key (“Allen wrench”)
Open-end wrenches, 13mm (1/2"); 14mm (9/16”)
Assembly
Refer to exploded view on reverse side for parts
clarification. Bracketed numbers refer to index
numbers in exploded view.
1. Install two levelers [5] into bottom of each leg.
Levelers can be adjusted for height and
leveling of lathe. Tighten hex nut against leg to
secure setting.
2. Install cross bar [4] at bottom of legs with
screws and washers [7/8]. Make screws snug
but do not fully tighten yet.
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Manual No. M-719102A
Ph.: 800-274-6848 Edition 2 11/2018
www.jettools.com Copyright © 2017 JET, a Division of JPW Industries, Inc.
Specifications
Stock no. 719102A
Assembled dimensions (WxDxH, approx.):
26-3/4 x 23 x 31-1/2 in. (680 x 584 x 800 mm)
Shipping dimensions (WxDxH, approx.)
31.9 x 28 x 8.7 in. (810 x 710 x 220 mm)
Net weight (approx.): 17 kg (37.5 lbs)
Shipping weight (approx.): 20.5 kg (45.1 lbs)
# 719102A Stand for JWL-1015/1015VS Lathes
Index No Part No Description Size Qty
1 ................. JWL1221VSS-101 ....... Bracket ......................................................................... ........................................ 2
2 ................. JWL1221VSS-102 ....... Leg ............................................................................... ........................................ 2
3 ................. JWL1221VSS-103 ....... Tube Cap ..................................................................... ........................................ 4
4 ................. JWL1015S-104 ........... Cross Bar ..................................................................... ........................................ 1
5 ................. JWL1642-206 ............ Leveler ......................................................................... 3/8” .................................. 4
6 .................
7 ................. F005415 ...................... Hex Socket Hd Cap Screw * ........................................ M8-1.25 x 80 ................... 8
8 ................. TS-1550061 ................ Flat Washer * ............................................................... M8 ................................. 12
9 ................. TS-1540061 ................ Hex Nut *...................................................................... M8 ................................... 4
10 ............... TS-0680031 ................ Flat Washer * ............................................................... 5/16” ................................ 4
11 ............... TS-0720081 ................ Lock Washer * .............................................................. 5/16” ................................ 4
12 ............... TS-0208041 ................ Socket Head Cap Screw *............................................ 5/16”-18 x 3/4” ................. 4
................... LM000287 ................... ID Label, JWL-1015 Stand (not shown) ....................... ........................................ 1
................... JWL1015S-HP ............ Hardware Package (includes items with *) ................... ..........................................
TS-0561031 ............... Hex Nut ........................................................................ 3/8”-16 ............................. 4
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00
p.m. CST. Having the Model Number and Serial Number of your machine available when you call will allow us
to serve you quickly and accurately. Non-proprietary parts, such as fasteners, can be found at local hardware
stores, or may be ordered from JET.
WARNING: This product can expose you to chemicals including lead and cadmium which are known to the
State of California to cause cancer and birth defects or other reproductive harm, and phthalates which are
known to the State of California to cause birth defects or other reproductive harm. For more information go to
http://www.p65warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products generates wood dust and other
substances known to the State of California to cause cancer. Avoid inhaling dust generated from wood
products or use a dust mask or other safeguards for personal protection.
Wood products emit chemicals known to the State of California to cause birth defects or other reproductive
harm. For more information go to http://www.p65warnings.ca.gov/wood.
Loading...