JET 321590 User Manual
GH-1860ZX WITH ACU-RITE
300S DRO
321590
The ZX-Series Large Spindle Bore Lathe provides power, precision, efficiency
and reliability to your metal shop. A one piece cast iron base absorbs vibrations
during operation to allow heavier cuts and ensure accuracy, while the Universal
Gearbox eliminates the need to change gears. Features you've come to expect
in a JET Lathe that is backed by the industry-leading JET Two Year Warranty.
Follow rest
Large capacity steady rest
Fully integrated coolant system
Full length splash guard and coolant return
Large easy to use foot brake
Articulating halogen work lamp
Centrally located controls with jog button
Threading dial
Mounting pads and levelers
Live center
Tolerance Test Certificate
Tool box and adjusting tools
31/8”borespindleissupportedbytwotaperedandoneballbearings
Chrome molybdenum headstock gears are hardened, ground and shaved
Universal gearbox allows inch, metric, diametral and module pitch threads,
no change gears required
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
T-slotted compound slide featuring four-way tool post
One piece cast iron base absorbs vibration allowing heavier cuts
High quality ANSI Class 50 wear resistant cast iron bed ways are hardened
and ground
Removable gap allows large diameter work
Five position automatic carriage stop increases productivity
Attractive chrome levers, dials and knobs complete this impressive package
Meehanite Castings
Standard Equipment
10”3jawscrollchuckwithtopreversingjaws
12”4jawindependentchuck
16" face plate
Four-way tool post
FEATURES
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the
United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair,
assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center
in your area call 1-800-274-6848.
GH-1860ZX WITH ACU-RITE
300S DRO
321590
Size 18 x 60
Digital Readout ACU-RITE 300S
Swing Over Bed (In.) 18
Swing Over Cross Slide (In.) 11
Swing Through Gap (In.) 27-1/2
Length of Gap (In.) 12
Distance Between Centers (In.) 60
Spindle Bore (In.) 3-1/8
Spindle Mount D1-8
Spindle Taper with Sleeve MT-7 (MT-5)
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 25 - 1,800
Number of Longitudinal and Cross Feed Rates 122
Range of Longitudinal Feeds (IPR) .0015 - .0913
Range of Cross Feeds (IPR) .0006 - .0365
Number of Inch Threads 61
Range of Inch Threads (TPI) 1-5/8 - 72
SPECIFICATIONS
Loading...