Jensen SMPS-1000 User Manual

0

BLUETOOTH STEREO SPEAKER WITH FM RADIO

USER MANUAL

SMPS-1000

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

1

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of your
musical enjoyment. Now it's time to consider how you can maximize the fun and excitement
your equipment offers. This manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level.
One that lets the sound come through loud and clear without annoying blaring or distortion and,
most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association's Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its back cover. You should note the serial number
of this unit in the space provided as a permanent record of your purchase to aid in identification
in the event of theft of loss.

Model Number: SMPS-1000 Serial Number: ____________________

2

WARNINGS

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or

moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those

specified may result in hazardous radiation exposure.

CAUTION

DO NOT OPEN

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these Instructions.

2) Keep these Instructions.

3) Heed all Warnings.

4) Follow all Instructions.

5) Do not use this apparatus near water.

3

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. Minimum distances 2 cm around the apparatus for sufficient ventilation. The

ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) No naked flame sources, such as lighted candles, should be placed on the apparatus.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety.

When the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

11) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

12) Only use attachments/accessories specified by the manufacturer.

13) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

14) Unplug this apparatus during lightning storms or when unused for long

periods of time.

15) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

16) The apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on apparatus.

17) Main plug is used as disconnect device and it should remain readily operable during

intended use. In order to disconnect the apparatus from the mains completely, the mains

plug should be disconnected form the mains socket outlet completely.

18) Caution mark and name plate are located at the back of apparatus.

19) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

20) CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

SAVE THESE INSTRUCTIONS

PORTABLE CART WARNIN

G

(symbol provided by RETAC)

810-00000S-190

4

IMPORTANT NOTES

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as electric

heaters.

• Places subject to constant vibration.

• Dusty, humid or moist places.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT
THE PLUG TO MAIN POWER SOCKET.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may

cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate
the equipment.

Protect Your Furniture

This product is equipped with non-skid rubber 'feet' to prevent the product from moving when
you operate the controls. These 'feet' are made from non-migrating rubber material specially
formulated to avoid leaving any marks or stains on your furniture. However certain types of oil
based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to
soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt pads, available at
hardware stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.

AC Plug

AC Outle

t

5

LOCATION OF CONTROLS

MAIN UNIT

1. BLUETOOTH INDICATOR

2. POWER

ON/STANDBY BUTTON

3. VOLUME- BUTTON

4. VOLUME+ BUTTON

5. TUNING/SKIP DOWN

BUTTON

6. TUNING/SKIP UP

BUTTON

7. BLUETOOTH PAIR/PLAY/PAUSE

BUTTON

8. SOURCE BUTTON

9. LCD DISPLAY

10. REMOTE INFRARED SENSOR

11. AUX IN L/R RCA CONNECTORS

12. LINE IN JACK

13. RESET BUTTON

14. AC POWER CORD

10

11

12
13

1
2

7
8

3456

14

9