Jensen SMP-2GBL, SMP-xGBL User Manual

DIGITAL AUDIO PLAYER
USER MANUAL
SMP-2GBL
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
- 1 -
DEAR JENSEN CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
- Start your volume control at a low setting.
- Slowly increase the sound until you can hear it comfortably and clearly and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on the unit. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss.
Model Number: SMP-2GBL Serial Number:
- 2 -
SAFETY INFORMATION
Read this user guide carefully to ensure proper use of the product and to avoid any danger or physical damage.
- Do not use this unit in extremely hot, cold, dusty and moist environment.
- Do not drop the unit, this could cause damage to the external cabinet as well as internal components.
- Do not repair the unit by yourself, or it will cause damage.
- Do avoid getting the unit wet or drop it in water.
- Do not use the unit while driving or doing other things that you must fully concentrate in. It may cause distraction.
- Use your unit with care and attention to your health, especially your hearing.
- To avoid damage by electrostatic discharge, do not operate the unit in extremely dry environment.
- Always use the accessories provided by or approved by our company, also do not subject your unit to moisture.
- Please follow the right way to download data; we won't be responsible for the loss of date due to misuse.
COMPLIANCE WITH FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed t o provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- 3 -
LOCATION OF CONTROLS
LCD SCREEN INDICATORS
1
Battery Power
2
Repeat Mode
3
Preset EQ
4
Volume Level
5
ID3 Tag (Title/Artist/Album)
6
Play Mode
7
Current / Total Track Number
8
File Properties (Bitrate/Type)
9
Elasped / Total Time
MAIN UNIT
1
Headphone Jack
2
USB Port
3
MODE Key with Forward and Backward Control
4
A-B/REC Button
5
VOL (VOLUME)+ Button VOL (VOLUME) - Button
6
Battery Compartment Cover
7
HOLD Switch
8
LCD Screen
9
PLAY/PAUSE/STOP/ON-OFF Button
10
Hole for neckstrap
11
Microphone
Loading...
+ 7 hidden pages