Jensen MS30 User Manual

VOL-

VOL+

MODE

l<<

>ll

>>l

FOLDER

MS30

MUTE

MS30

Owner’s Manual

MS30

CONTENTS

Introduction ................................................................................................................ 1

Features ................................................................................................................................ 1

Box Contents......................................................................................................................... 1

Compliance ........................................................................................................................... 1

Safety Information ................................................................................................................. 2

Installation .................................................................................................................. 3

Mounting the Radio ............................................................................................................... 3

Auxiliary Input........................................................................................................................ 4

Line Output............................................................................................................................ 4

Wiring Diagram ..................................................................................................................... 5

Operation .................................................................................................................... 6

Basic Functions..................................................................................................................... 6

Audio Menu ........................................................................................................................... 7

Radio Mode........................................................................................................................... 7

USB Mode............................................................................................................................. 8

Auxiliary Input Mode.............................................................................................................. 8

Troubleshooting......................................................................................................... 9

Specifications........................................................................................................... 10

MS30

INTRODUCTION

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.

Features

• Waterproof iPx6

• UV and Corrosion Resistant

• AM/FM Tuner

• 12 Programmable Presets (6 AM, 6 FM)

• USB MP3/WMA Player

• Rear Auxiliary Audio Input

• Rear Line Output

• 4-Channel Amplified Audio Output

Box Contents

• MS30 Radio

• Radio Mounting Bracket

• Screw Posts (x2)

• Locking Hex Nuts (x2)

• Washers (x2)

Compliance

Compliance with FCC Rules (U.S.A. Only)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential application. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications.

FCC WARNING

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

• Proper connections must be used for connection to a host computer and/or peripherals in order to meet FCC emission limits.

MS30

Safety Information

• To ensure full satisfaction with the product, please read the entire instruction manual.

• Keep instructions for future reference.

• Follow all operation guidelines and adhere to all safety warnings and cautions to ensure safe

use.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

• Only use attachments/accessories specified by the manufacturer.

• Never use harsh cleaning agents. Clean only with a dry cloth.

When Driving

Keep the volume level Iow enough to be aware of your surroundings.

Protect from Water

Do not submerge, as this can cause electrical shorts, fire or other damage.

Protect from High Temperatures

Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.

Do not mount the radio within close proximity of the engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

WAR NIN G:

• DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result

in fire, electric shock or product damage.

• USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE. Failure to do so may

result in fire, electric shock or product damage.

• DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION. Doing

so may obstruct vision or hamper movement which can result in a serious accident.

• INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR

SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole. It is also recommended to apply sealing caulk to any opening that may potentially allow water to enter.

• Be sure to choose a location that is flat and has clearance above the unit to prevent any

damage, as well as allow for ventilation.

• Before drilling any holes, carefully inspect the area underneath and behind the mounting

surface where the device will be mounted to make sure it will not interfere with existing wires, fuel lines, the fuel tank or any other objects that could be damaged.

• Always disconnect the vehicle negative battery terminal during installation to prevent

accidental shorting.

MS30

3 Inch Hole

INSTALLATION

Mounting the Radio

1. Choose a mounting location on the dash board or instrument panel that will allow room behind to run radio cables to the power source. Consider how you will use the AUX IN, LINE OUT and USB connectors and route the appropriate extension cables to an accessible area.

2. Cut a hole in the dash board using the template provided in the back of this manual. At least 3 3/4” depth is needed to mount the radio.

IMPORTANT! Do not mount this unit where it can be submerged in water.

3. Slide the included spring washers (B) over the screw posts (A) and attach the screw posts to the back of the radio.

4. Place the radio in front of the dashboard opening so the wiring can be brought through the opening.

5. After completing the wiring connections, turn the radio on to confirm operation (vehicle accessory switch must be on). If the radio does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the radio. Refer to the “Wiring Diagram” on page 5.

NOTE: Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

6. Insert the radio into the mounting hole.

7. Place the “U” bracket (C) over the screw posts and secure the radio to the dash using the included hex nuts (D). If necessary, cut the score marks (E) on either side of the mounting bracket to custom fit the bracket length for your application. See Figure A.

Figure A - Installation

+ 9 hidden pages