www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
|
This Data Sheet Includes Information On |
|
|
Jenn-Air |
|
• |
Product Model Number (s): |
• |
|
27" Electric Double Ovens: |
|
|
WW2750B, WW2750W, WW2780B and WW2780W |
|
• |
Dimensions (Actual Size) |
• |
|
Cutout width: |
25" |
|
Cutout height: |
50 1/2" |
|
Minimum cabinet width: 27" |
|
|
Minimum cabinet depth: 24" |
|
|
Minimum cutout location from floor : 3" to 12" |
|
|
Distance from face of cabinet to |
|
|
outer edge of open doors (Door Swing): |
21 3/8" |
|
Distance from face of cabinet to |
|
|
front of closed door handle: |
3 3/4" |
|
Overall unit width: |
26 3/4" |
|
Overall unit height: |
51" |
|
Penetration into cabinet: |
23 1/4" |
Oven overlap distances when using cutout dimensions listed above:
Top overlap: 1/2"
Bottom overlap: 0"
Right side overlap: 7/8"
Left side overlap: 7/8"
• |
Additional Information |
• |
•Cutout height and width are ± 1/16".
•Cutout in cabinet should be level and straight. There are no provisions to level the unit after it is installed.
•Construct 5/8" minimum plywood floor flush with bottom of opening. Floor must be level and straight and capable of supporting 250 lbs.
•A three-wire, single phase, A.C. 120/208-240 volt, 60Hz cycle electrical system must be provided (Load 44.8 amps @ 120/240VAC). 7/8" O.D. flexible cable 4 feet long is furnished by manufacturer. Mount junction box in area under plywood floor if adequate lower cabinet space is available. Locate 1 1/4" conduit access hole in the back right hand side of the plywood floor.
•For European style cabinets (flush front) the required clearance for operation of the oven door is a minimum spacing of 7/8" between the cutout and the door, hinge or drawer of the cabinet.
•Some 27" built-in cabinets may not be wide enough, due to their construction, to allow this installation.
•WW275OB and WW278OB : Black.
•WW275OW and WW278OW : White.
Subject to change without notice. This system is designed to |
|
be updated daily if necessary. Dimension Express is not |
|
responsible for use of superseded, voided, or outdated data |
|
sheets. Because of the difficulty or impracticability of deter- |
|
mining actual damages, liability of Dimension Express shall |
|
not exceed $50.00. |
|
Copyright © Dimension Express, 2000. |
262 |
Cabinet Opening |
27" |
|
|
|
|
||
(not to scale) |
25" |
|
|
|
|
24" |
|
CAUTION: If cabinet doors are |
|
|
|
provided above wall oven, a |
|
|
|
minimum spacing between the top |
|
|
|
of the cutout |
and the door above |
|
|
is 2" for 1/2" or less thick doors. |
|
|
|
2 1/2" for 1/2" to 3/4" thick doors. |
|
|
|
3 1/2" for 3/4" and up thick doors. |
|
|
|
|
|
12" |
|
|
Alt. electrical location |
18" |
|
|
|
|
|
|
|
50 1/2" |
|
7/8" is required spacing |
|
|
|
from the cutout to the |
|
|
|
doors, hinges, or drawer |
|
|
|
fronts to each side and |
|
|
|
below. |
|
3" to 12" |
|
|
|
||
|
|
Provide for 120/208-240 |
volt electrical |
|
|
connection in this area. |
|
Overall Dimensions
(not to scale)
51"
23 1/4"
26 3/4"
3 3/4"
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN207 • A262 • 31469 • 002906 • 112422 • 13061 |
associated with reusing old Data Sheets. |